Краткое содержание страницы № 1
RS-725LCD
PROFESSIONAL REMOTE CAR STARTER
WITH ALARM SYSTEM
&
2-WAY LCD COMMUNICATION
OPERATION MANUAL
THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY
1
Краткое содержание страницы № 2
TABLE OF CONTENTS: LCD REMOTE TRANSMITTER: 5 A BATTERY REPLACEMENT 6 B THE REMOTE LCD ICONS WITH FUNCTION 7 C PROGRAMMING OF THE LCD REMOTE TRANSMITTER 1. Screen Lamp ON 7 2. Power Save Mode 7 3. Clear The Flash Icon and Melody Sound 7 4. Stop The Melody Sound. 7 5. Button Lock 8 6. Vibration / Melody Mode 8 7. Enable / Disable Bi Sound While Pressing Button: 8 8. Low Battery Indicat
Краткое содержание страницы № 3
Noise Abatement Circuit 15 16 O ANTI CAR- JACKING 16 Active Anti Car Jacking Passive Anti Car Jacking 16 Trigger The Anti Car Jacking Mode 16 Override The System To Turn Off Anti Car Jacking 16 16 P SYSTEM’S TRIGGER CHECK 16 Q SYSTEM’S STATUS CHECK 16 R DRIVER PAGING (OPTION) 17 S DOME LIGHT CONVENIENCE DELAY & SUPERVISION 17 T IGNITION CONTROL THE DOOR LOCK/UNLOCK 17 U TRUNK RELEASE (CHANNEL
Краткое содержание страницы № 4
TRANSMITTERS The RS725 comes with two transmitters. The XT72LCD is a 2-way transmitter and receiver, also referred to as a transceiver. The XT-33 is a mini-size 1-way transmitter. Both operate on the AM band with a code-rolling feature that will prevent any illegal use of a code-grabber attempting to record and steal the codes of your transmitter. CHANGING THE BATTERY IN YOUR TRANSMITTERS XT72LCD:
Краткое содержание страницы № 5
WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an enclosed area or
Краткое содержание страницы № 6
B. THE REMOTE LCD ICONS WITH FUNCTION: Door Lock Door Unlock Your vehicle doors are Your vehicle doors are locked unlocked and the system is Disarmed Armed Mode Valet Mode Your vehicle is in armed All the function shall be mode temporarily on hold. Remote Transmission In – Range Indicator You are transmitting the Your are within range of signal to control unit the remote control Door
Краткое содержание страницы № 7
C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER: Transmitter Button Description Operation LCD screen lamp turns on for Press and hold for 1 second (1 second) 5 seconds. 1 melody sound to confirm enters. Press and hold for 3 seconds Timer Programming Mode. (3 seconds) 2-melody sounds to confirm enter. Press and hold for 5 seconds Power Save Mode (5 seconds) 1 melody sound to confirm enters Clear the Fl
Краткое содержание страницы № 8
6. Vibration / Melody Mode: This is useful when you are in a noisy place and it is difficult to hear the beep sound from the remote control. In this mode, the remote control vibrates itself if your security system is triggered. Press the button first, within 3 seconds press and hold ( ) button for 2 seconds to select the mode of vibration or melody, the icon will displayed on the LCD screen to sho
Краткое содержание страницы № 9
D. CLOCK & TIMER SETTING: Transmitter Button Description Press Transmitter Button Press & Hold Clock Setting (Hour) 1 for – and for + *Flash digit for adjusting button for 3 seconds Time setting (Minute) Press button once for – and for + *Flash digit for adjusting Press button Alert Alarm Time Setting (Hour) 2 for – and for + *Flash digit for adjusting once. Alert Alarm Time Setti
Краткое содержание страницы № 10
3. Count Down Timer Setting: Example- Set the countdown timer at 2:30 1. Press & hold the button for 3 seconds, two-melodies will sound and the “Hours” digit will flash for adjustment. 2. Press the button 5 times, the LCD screen will show the icon and the “Hours” digit flashes for adjustment. 3. Press or button to decrease or increase the “Hour” digit until 2:xx. 4. Press the button once again then
Краткое содержание страницы № 11
Passive Arming By-pass While the system Disarmed. - Activate or Turn Off The Remote Start Press twice within 3 seconds. Channel # 4 Timer Output (4) Optional + Switching code For 2nd Car Operation. For regular remote transmitter II Only B. LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function Remark System’s Trigger Record Press within 3 seconds - (C) Check Syste
Краткое содержание страницы № 12
4. Passive Starter Fast Flash Disable Disable 5. Panic Alarming Flashes Flashes 6. Car-Jacking Alarming Flashes Disable Flashes 7. Car Locator 6 Chirps 12 Flashes Locking G. ACTIVE ARMING – LOCK & ARM: 1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if interfac
Краткое содержание страницы № 13
by-pass, press the transmitter or buttons and the system will return to normal status. I. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming. (Note: Power door locks a
Краткое содержание страницы № 14
4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the Valet Switch. 5. Turn the ignition switch “OFF” position. 4 Chirps from siren/horn and 3 flashes from the parking lights will indicate the system has disarmed. Note 1: You must override the alarm within 60 seconds. If not, the system will automatically re-arm. EXAMPLE: To Override The System With The Password Code 83,
Краткое содержание страницы № 15
2. During panic mode, the normal function of this transmitter button will be disabled. The transmitter and buttons can be used to lock and unlock the door (if the option is installed), however once the button is pressed, the vehicle’s starter disable device, (where installed) will be disengaged allowing the vehicle to start. 3. To stop the alarm, press and hold the transmitter or button on the transm
Краткое содержание страницы № 16
O. ANTI CAR- JACKING Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature “OFF”. This system is default setting all car jacking “OFF”. ACTIVE ANTI CAR JACKING: 1. Press and hold the transmitter and buttons at the same time for 2 seconds while the vehicle’s ignition is ON. The parking lights will turn on for 1.5 seconds to indicate entry. 2. Once th
Краткое содержание страницы № 17
Out of Car Driver Paging (Optional Feature) If someone tries to page you by tapping the paging (knock) sensor (OPTIONAL) which is usually mounted on the bottom part of front window, the paging melody sound continues sounding from you Remote LCD Transmitter and the “ ” icon will flash on the LCD screen. 1. Press the transmitter button first, within 3 seconds press ( ) button to activate the out-of-car dri
Краткое содержание страницы № 18
X. SECOND VEHICLE SECURITY OPERATION: Your 5-button remote transmitter can be utilized to control a second vehicle security system, To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. nd Programming the Transmitter to 2 Car Enter: 1. Turn the ignition key ON 3 times. (Finishing in the ON position) nd 2. Press valet switch 2 times, holding in
Краткое содержание страницы № 19
REMOTE START OPERATION: A. TO REMOTE START THE VEHICLE: When you want to start your vehicle, Activate Remote 1. Press button once on the transmitter. Start 2. The parking light will activate to indicate the remote start received the signal. 3. The engine will start in approximately 5 seconds. 4. Once the engine is running, after couple seconds the parking lights will turn on and the climate controls
Краткое содержание страницы № 20
2. Before turning off the engine, press and release and buttons at the same time. -- The LED will flash indicating the remote start has entered the turbo charge mode. 3. Take the “Ignition Key” from the key cylinder. -- Engine keeps running. -- 4. Exit and secure the vehicle. -- Engine continues running until the pre-programmed time elapsed. -- NOTE: This feature only applies to vehicles with Turbo Eng
