Краткое содержание страницы № 1
R
Digital Video Camcorder
Operating Instructions
Model No. PV-DV52
Mini
Before attempting to connect, operate or adjust this product, please read these
instructions thoroughly.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
LSQT0562B
DV52.p 1-4.p65 1 02/05/28, 10:35
Краткое содержание страницы № 2
Things You Should Know Thank you for choosing Panasonic! Date of Purchase You have purchased one of the most Dealer Purchased From sophisticated and reliable products on the market today. Used properly, we’re sure it Dealer Address will bring you and your family years of enjoyment. Please take time to fill in the Dealer Phone No. information below. The serial number is on Model No. the tag located on the underside of your Palmcorder. Be sure to retain this manual Serial No. as your convenient Pa
Краткое содержание страницы № 3
Before Use Important Safeguards 1. Read Instructions — All the safety and operating 11. Grounding or Polarization — This video unit may be instructions should be read before the unit is equipped with either a polarized 2-wire AC operated. (Alternating Current) line plug (a plug having one blade wider than the other) or 3-wire grounding type 2. Retain Instructions — The safety and operating plug, a plug having a third (grounding) pin. instructions should be retained for future reference. The 2-wi
Краткое содержание страницы № 4
Important Safeguards 15. Power Lines — An outside antenna system should b. If any liquid has been spilled into, or objects have not be located in the vicinity of overhead power lines fallen onto, the video unit. or other electric light or power circuits, or where it can c. If the video unit has been exposed to rain or water. fall into such power lines or circuits. When installing d. If the video unit does not operate normally by an outside antenna system, extreme care should be following the ope
Краткое содержание страницы № 5
Before Use Special Features Camera VCR For Your Information Table of Contents Things You Should Know ................................................................................................ 2 Important Safeguards ..................................................................................................... 3 Precautions .....................................................................................................................4 Before Using ...............................
Краткое содержание страницы № 6
Before Using Unpack your Palmcorder 1 pc. AC Adaptor 1 pc. Battery Pack 1 pc. A/V Cable (PV-DAC11) with AC Cable (CGR-D08/CGR-D08R) (LSJA0280) and DC Cable 1 pc. Lens Cap (LSYF0521) 1 pc. Shoulder Strap with Lens Cap Strap (LSFC0012) (LSGQ0066) ® ® Microsoft and Windows are registered trademarks of Microsoft in the United States and other countries. ® ® Intel Pentium is a registered trademark. i.LINK is a trademark. PHOTOVU LINK is a registered trademark. IBM is a registered trademark of IBM Com
Краткое содержание страницы № 7
Before Use Before Using Before you begin Easy Cassette Eject/Insertion Connect the Palmcorder to a power If the Palmcorder is connected to a power source. (pp. 11, 12) source, the cassette can be inserted and ejected without turning the Palmcorder on. 1 Press LCD-OPEN to unlock the LCD monitor, and swing it fully open. 4PUSH 2TAPE EJECT CLOSE 2 Slide TAPE EJECT to open the Cassette Compartment Cover. 3 Insert a cassette record tab up, window side facing out. 4 Press PUSH CLOSE to close th
Краткое содержание страницы № 8
Before Using Lens Cap Hand Strap Adjust the length of the Hand Strap to the Attaching the Lens Cap Strap: size of your hand as illustrated. Thread the Lens Cap Strap through the Strap Attachment Ring as shown. 1 2 Attaching the Lens Cap Cord to the Hand Strap: 3 Remove the Hand Strap from the front Hand Strap clasp and thread the Strap through the loop in the Lens Cap Cord. Reattach the Hand Strap. Using the Built-in Light Before you begin Connect the Palmcorder to a power To brighten the natu
Краткое содержание страницы № 9
Before Use Quick Guide Before you begin Insert the Battery Pack Charge the Battery. (p. 11) 2 1 1 Insert the Battery Pack and slide it up until it locks with a click. Insert Cassette These Palmcorders are equipped with the Easy Cassette Eject System so it is easy to insert or remove tapes, even when on a tripod. (p. 7) 1 Press LCD-OPEN to unlock the LCD 2 Set POWER to VCR or monitor, and swing it fully open. CAMERA. 3 Slide TAPE EJECT to open the Cassette Compartment Cover. 4 Insert a cassette
Краткое содержание страницы № 10
Quick Guide Camera Recording When the LCD monitor is fully open, the Viewfinder automatically turns OFF. 2 Adjust the Vision Adjustment 1 Set POWER to CAMERA. Control to your eyesight. Viewfinder 180° 90° LCD Monitor 4 Press REC/PAUSE to start recording. 3 Press LCD-OPEN to unlock Press REC/PAUSE again to pause the LCD monitor. Swing it fully recording. open and adjust the angle. To Watch Playback in the LCD (Liquid Crystal Display) Before you begin Charge the Battery. (p. 11) When the LCD mon
Краткое содержание страницы № 11
Before Use Supplying Power Charge the Battery Pack on the AC Adaptor 1Connect and plug in the Power Cord as shown. POWER Lamp will light. Remove the DC Cable, if attached, from the adaptor. 2Attach the Battery as shown to charge. POWER Lamp CHARGE Lamp lights up. It goes out when charging is complete (approx. 1 hour). Expect approx. 1 hour 30 minutes of operation (using EVF) when fully charged. 3Remove the Battery. Slide the Battery out and then lift up. CHARGE Lamp Note About the Flashing
Краткое содержание страницы № 12
Supplying Power Battery Care Caution: To avoid damage to the Battery: Charge only with specified charger. Do not drop or jar the Battery. Charge the Battery within an ambient Use the Battery with specified models only. temperature range of 10 °C (50 °F) and If the Battery is used in extremely high 30 °C (86 °F). temperatures, a safety device will automatically The Battery may be warm after charging or just prevent operation. after use. This is normal. To insure longer battery life:
Краткое содержание страницы № 13
Before Use Setting the Clock Before you begin Set the Date and Time Connect the Palmcorder to a power The date and time is calculated, including source. (pp. 11, 12) leap year, up to DEC 31 2089. Set POWER to CAMERA or VCR. 1 Press MENU to display the Camera or VCR mode menu screen. 2, 3, 4 (p. 14) JOG KEY [ VCR MENU ] [ CAMERA MENU ] . 1MENU 2 Rotate JOG KEY to select DISPLAY SETTING , and then press JOG KEY to display the DISPLAY SETTING EXAMPLE: menu screen. YEAR : 2002 3 Rotate JOG KEY
Краткое содержание страницы № 14
Using the Palmcorder Menu The Palmcorder features two menu Displaying the MENU displays: one for CAMERA mode (recording) and the other for VCR mode (Playback). (pp. 59~62) 1Press MENU to display the CAMERA or VCR menu (according to the While the Menu screen is displayed, you POWER setting). cannot record on or play a tape. While recording, the Menu screen cannot 2Rotate JOG KEY to select a menu be displayed. item. During playback, the Menu screen can be displayed. Setting the MENU Items Be
Краткое содержание страницы № 15
Camera Camera Recording Simple Recording Before you begin Remove the lens cap and clip it to the hand Connect the Palmcorder to a power strap. source. (pp. 11, 12) Insert a cassette with the record tab closed. (p. 6) 1 Set POWER to CAMERA. The POWER Lamp lights red. Be sure POWER is fully turned to the CAMERA position. 2 With the Viewfinder Eye Cup held up against your eye, adjust the Vision Clip here Adjustment Control to your eyesight. Adjust the EVF Brightness of the Viewfinder if n
Краткое содержание страницы № 16
Camera Recording Using the LCD Monitor 1Press LCD-OPEN to unlock the LCD The LCD (Liquid Crystal Display) monitor monitor. can be used while recording. 2 Swing the LCD monitor fully open and adjust the viewing angle. The LCD monitor will automatically turn on. When the LCD monitor is completely closed, it will shut off automatically to save power. 1LCD-OPEN Adjust the LCD Brightness and/or color of the LCD monitor if necessary. Please refer to “To adjust the LCD/ EVF BRIGHTNESS or COLOR”
Краткое содержание страницы № 17
Camera Camera Recording Digital PhotoShot™ Mode Use this feature to record a seven second 1 Set POWER to CAMERA. (approx.) still image from the current camera picture. Audio is also recorded for on-the- spot narration. Or, you can add narration 2 Press PHOTOSHOT in Record/Pause later with the Audio Dubbing feature to make mode. “PHOTO” will appear in the EVF or the LCD monitor. an interesting slide show, etc. (p. 38) EVF/LCD 1POWER Note If SHUTTER on the menu screen is set to ON, a sound effec
Краткое содержание страницы № 18
Camera Recording Zoom You can gradually zoom in for close ups or zoom out for wide angle shots. 1 Set POWER to CAMERA. 2 Zoom slowly: 2POWER by lightly pressing the “T” (Telephoto) ZOOM or the “W” (Wide Angle) side of the POWER ZOOM. 1POWER Zoom quickly: by applying more pressure. 3 Start recording. Note The zooming speed ranges from a slow 17 seconds to a fast 1.5 seconds according to the amount of pressure 3REC/PAUSE applied to the POWER ZOOM. Recording Check To playback the final few se
Краткое содержание страницы № 19
Camera Camera Recording Recording Still Pictures You can record still pictures of any desired duration together with sound. 1 While in RECORD mode, press STILL and hold for 2 seconds to capture a 1, 2STILL still picture. The captured still picture will be recorded together with sound. 2 Press STILL once again to release the still picture. The camera will resume recording real-time pictures. Self Recording Rotate the LCD monitor 180 degrees so it faces the same direction as the lens to record you
Краткое содержание страницы № 20
Special Effect Features CINEMA Mode You can record a picture compatible with a 1 Set POWER to CAMERA. wide-screen TV equipped with an S2 picture terminal. 2 Press MENU to display the CAMERA mode menu screen. 3, 4 JOG KEY 3 Rotate JOG KEY to select ADJUST , then press JOG KEY to display the 1POWER CAMERA ADJUST menu screen. 4 Rotate JOG KEY to select CINEMA , and then press JOG KEY to select ON. 2MENU A black strip will appear at the top and bottom of the picture. Press MENU twice to exit. 5R
