Краткое содержание страницы № 1
> > > >> >>
InFocus Corporation
27700B SW Parkway Avenue
Wilsonville, Oregon 97070-9215
1-800-294-6400 503-685-8888
•
Fax: 503-685-8887
http://www.infocus.com
In Europe:
InFocus International B.V.
User’s
Strawinskylaan 585
1077 XX Amsterdam,The Netherlands
Phone: +31 20 579 2000
Fax: +31 20 579 2999
In Asia:
238A Thomson Road
Guide
#18-01/04 Novena Square
Singapore 307684
Telephone: (65) 6334-9005
Fax: (65) 6333-4525
Краткое содержание страницы № 2
IF YOU NEED ASSISTANCE.... For all types of Service and Support information on our products and services please go to our website at www.askproxima.com WARNING: This product contains chemicals, including lead, known to the State of California Many resources are available on our website. Some examples are: to cause birth defects or other reproductive •Frequently Asked Questions about general harm. Wash hands after handling. projector usage and technical issues •E-mail support WARNING: This pro
Краткое содержание страницы № 3
This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, Norwe- gian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, please read these instructions. Le mode d'emploi complet est disponible sur le CD joint sous forme de fichier pdf d'Adobe Acrobat dans les langues suivantes : anglais, français, allemand, italien, norvégien, portugais,
Краткое содержание страницы № 4
Declaration of Conformity Canada Manufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon This Class A digital apparatus complies with Canadian ICES-003. 97070 USA Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands Agency Approvals We declare under our sole responsibility that this projector conforms to the following UL, CUL, TUV, GOST directives and norms: Other specific C
Краткое содержание страницы № 5
Table of Contents If you are experienced in setting up presentation systems, use the included Quick Set Up card. For complete details on connecting and operating the projector, refer to this User’s Guide. Electronic versions of this User’s Guide Introduction 5 in multiple languages are available on the included CD and on our website. Connecting a computer 7 Required computer connections 7 The website also has technical specifications (an interactive image size cal- Displaying a computer image
Краткое содержание страницы № 6
Important Operating Considerations for Safety Place the projector in a horizontal position no greater than 15 degrees off axis. Do not place objects in the areas along the side and in the front of the projector Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents. 2 ft (.6m) 2 ft (.6m) Locate the projector at least 4' (1.2 m) away from any heating or
Краткое содержание страницы № 7
Projector components and features Introduction keypad Your new digital projector provides three computer and three video inputs and has XGA 1024x768 resolution. Optional user-changeable short and long throw lenses make this a flexible product suitable for many different uses. speakers The projector is easy to connect, easy to use, easy to maintain. An Interac- tive Display on the top of the projector gives you constant feedback on the status of the projector. air intake Online Registration
Краткое содержание страницы № 8
Connector Panel The projector provides three computer and three video connectors: component video external one M1-D (HD, DVI, and computer) PS/2 M1-D computer speakers mouse screen two VESA (HD, HD component, and computer) USB computer (audio out) s-video monitor trigger RJ-45 mouse audio one component RCA audio in R trigger one S-video monitor out computer 2 network PS/2 computer 1 USB one composite RCA L audio in computer 3 serial control one USB mouse (for use with the Computer 2
Краткое содержание страницы № 9
O I O I O I O I Connecting a computer connect computer cable audio in R trigger monitor out network mouse USB computer 1 computer 2 L Required computer connections audio in computer 3 serial control computer in Connect one end of the computer cable to the Computer 2 connector on the projector. Connect the other end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the monitor cable from the computer’s video port. Some Macintosh computers do
Краткое содержание страницы № 10
O I O I O I O I If you are using a desktop computer and want to see the image on your connect monitor cable computer screen as well as on the projection screen, plug the monitor cable audio in R trigger network mouse USB computer 1 computer 2 monitor out to the Monitor out connector on the projector. audio Lin computer 3 serial control computer in If you prefer connecting your computer to the projector with an optional M1-D cable, connect one end of that cable to the M1 port on your computer
Краткое содержание страницы № 11
Displaying a computer image remove lens cap Remove the lens cap. 2 press Power button Press the power switch to position “1” on the back of the projector, then press Power switch press the Power button on the top of the projector or the remote. I O The LED flashes green and the fans start to run. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a 1 minute for the image to achieve full brightness. ? No startup screen? Get help on page 17. turn
Краткое содержание страницы № 12
First-time projector use with Windows 98 a The first time you connect a computer running Windows 98 to the projector, the computer recognizes the projector as “new hardware” and the Add New Hardware Wizard appears. Follow these instructions to use the Wiz- ard to load the correct driver (which was installed with your Windows operating system). If you are running Windows 2000, Windows ME, or Window XP, skip these steps and go to “Adjusting the image” on page 12. a Click Next to begin searchin
Краткое содержание страницы № 13
Skip this page if you did not connect a USB mouse cable For Windows 98: If you connected the USB cable, the Add New Hardware Wizard appears again. Drivers must be installed to use the USB functionality. The Wizard launches two times. The first time it detects a USB Human Interface Device (for the key- board). The second time it detects a USB Human Interface Device (for the mouse). For Windows 2000, Windows ME, and Windows XP: The USB drivers are automatically installed. 11
Краткое содержание страницы № 14
Adjusting the image adjust height Adjust the height of the projector, if necessary, by pressing the release but- ton to extend the elevator foot. rotate level- ing foot elevator Rotate the leveling foot (located at the bottom back right corner), if neces- foot sary. Position the projector the desired distance from the screen at a 90 degree angle to the screen. adjust distance See page 42 for a table listing screen sizes and distances. Adjust the zoom or focus rings by rotating them until the
Краткое содержание страницы № 15
O I O I O I Connecting a video device connect A/V cable audio in R trigger Standard video connections monitor out network mouse computer 1 computer 2 USB L audio in computer 3 serial control Plug the audio/video (A/V) cable’s yellow connector into the video-out computer in connector on the video device. Plug the other yellow connector into the yel- low Video 2 connector on the projector. Plug a white connector into the left audio out connector on the video device and plug a red connector int
Краткое содержание страницы № 16
Displaying a video image remove lens cap Remove the lens cap. 2 press Power switch press Power button Press the power switch to position “1” on the back of the projector, then I press the Power button on the top of the projector. O The LED flashes green and the fans start to run. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a 1 minute for the image to achieve full brightness. ? No startup screen? Get help on page 16. turn on video device P
Краткое содержание страницы № 17
Adjust the zoom or focus rings by rotating them until the desired image size adjust zoom and focus and focus are produced. zoom focus If the image is not square, adjust the vertical keystone using the buttons on adjust keystone the keypad. Press the upper Keystone button to reduce the upper part of the image, and press the lower Keystone button to reduce the lower part. You can also adjust the horizontal keystone via the menus. See page 30. Adjust the volume on the keypad or remote. adjust vo
Краткое содержание страницы № 18
Shutting down the projector Troubleshooting your setup The projector automatically blanks the screen after no active source is If your image appears correctly on the screen, skip to the next section detected for 30 minutes. This blank screen helps preserve the life of the pro- (page 25). If it does not, troubleshoot the setup. The Interactive Display and jector. The image returns when an active source is detected or a remote or LED on top of the projector indicate the state of the projector a
Краткое содержание страницы № 19
A A A startup screen startup screen Source Troubleshooting Problem Solution Result Plug power cable in, press power switch, press power button. Remove lens cap. No startup screen Correct image 3 1 2 Computer image projected Only startup screen appears Press the Computer button Activate laptop’s external port or restart laptop 17
Краткое содержание страницы № 20
A A Signal out of range A A A A A Adjust computer refresh rate in Control No computer image, just the words “Signal out of Computer image projected Panel>Display>Settings>Advanced> range” Adapter (location varies by operating system) You may also need to set a different resolution on your computer, as shown in the problem, “Image fuzzy or cropped” Only my laptop’s background appears, not the Disable “Extend my Windows Desktop” in Background and Desktop projected Desktop icons Control Pan
