Краткое содержание страницы № 1
®
ViewSonic
- User Guide
- Guide de l’utilisateur
PJD5211/PJD5221/
PJD5231/PJD5122
- Bedienungsanleitung
DLP Projector
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
IMPORTANT: Please read this User Guide to obtain important information on install-
- 사용자 안내서
ing and using your product in a safe manner, as well as registering your product for
future service. Warranty information contained in this User G
Краткое содержание страницы № 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Краткое содержание страницы № 3
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Concentration Lead (Pb) 0.1% < 0.
Краткое содержание страницы № 4
Copyright Information © ® Copyright ViewSonic Corporation, 2010. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Краткое содержание страницы № 5
Table of contents Shutting down the projector .............. 35 Important safety Menu operation.................................. 36 instructions .......................3 Maintenance ...................43 Introduction......................5 Care of the projector .......................... 43 Projector features ................................. 5 Lamp information.............................. 44 Shipping contents................................. 6 Troubleshooting .............50 Projector exteri
Краткое содержание страницы № 6
Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may d
Краткое содержание страницы № 7
13. Do not block the ventilation holes. If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire. - Do not place this projector on a blanket, bedding or any other soft surface. - Do not cover this projector with a cloth or any other item. - Do not place inflammables near the projector. 14. Always place the projector on a level, horizontal surface during operation. - Do not use if tilted at an angle of more than 10 degrees left to right, n
Краткое содержание страницы № 8
Introduction Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • Screen Color correction allowing projection on surfaces of several predefined colors • Quick auto search speeding up the signal detecting process • Up to 8 sets of picture modes providing multiple choices for different projection purposes • Selectable quick cooling function make
Краткое содержание страницы № 9
Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Projector Power Cord VGA Cable Multi-language user manual Quick Start Guide Remote Control & Battery DVD Pull the tab before using the remote control. Optional accessories 1. Ceiling mount 2. Replacement lamp 3. S
Краткое содержание страницы № 10
Projector exterior view Front/upper side 1. External control panel (See "Projector and remote control" on page 8 for details.) 1 2. Vent (heated air exhaust) 3. Quick-release button 4. Lens cover 5. Focus ring and Zoom ring 6. Front IR remote sensor 7. Projection lens 2 8. AC power cord inlet 9. RS-232 control port 5 3 10. RGB signal output socket 6 11. RGB (PC)/Component video 4 (YPbPr/YCbCr) signal input 7 socket-1 12. RGB (PC)/Component video (YPbPr/YCbCr) signal input Rear/lower side so
Краткое содержание страницы № 11
Controls and functions Projector and remote control 14 20 10 5 1 2 15 3 9 21 4 5 16 6 10 7 17 13 11 22 8 12 23 18 6 24 13 19 25 1. Focus ring I I 5. POWER Adjusts the focus of the projected image. Toggles the projector between standby See "Fine-tuning the image size and mode and on. See "Starting up the clarity" on page 26 for details. projector" on page 19 and "Shutting down 2. Zoom ring the projector" on page 35 for details. Adjusts the size of the image. See "Fine- 6. Keystone/Arrow keys
Краткое содержание страницы № 12
9. LAMP indicator light 17. Enter Indicates the status of the lamp. Lights up Enacts the selected On-Screen Display or flashes when the lamp has developed a (OSD) menu item. problem. See "Indicators" on page 49 for 18. Keystone keys ( / ) details. Manually corrects distorted images 10. AUTO resulting from an angled projection. Automatically determines the best picture 19. Magnify keys (+, -) timings for the displayed image. See Magnifies or reduces the projected "Auto-adjusting the image" o
Краткое содержание страницы № 13
Approx. 15° Remote control effective range Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-re
Краткое содержание страницы № 14
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed near the
Краткое содержание страницы № 15
Projection dimensions Refer to "Dimensions" on page 52 for the center of lens dimensions of this projector before calculating the appropriate position. • 4:3 image on a 4:3 screen (b) (a) (e) (a) (f) (d) (c) (c) (d) (f) (b) (e) • 16:9 image on a 4:3 screen (b) (a) (a) (e) (f) (d) (c) (c) (d) (f) (b) (e) (e): Screen (f): Center of lens 4:3 Screen 16:9 Screen (a) Screen (b) Projection distance (b) Projection distance (c) Image (d) Vertical (c) Image (d) Vertical Size [m (inch)] [m (inch)] hei
Краткое содержание страницы № 16
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 6). They are commercially available from electronics stores. Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets
Краткое содержание страницы № 17
Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination. Connecting a monitor If you want to view your presentation close-up on a monitor as well as on t
Краткое содержание страницы № 18
Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: • Component Video •S-Video • Video (composite) You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source
Краткое содержание страницы № 19
Connecting a Component Video source device Examine your Video source device to determine if it has a set of unused Component Video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a Component Video source device: 1. Take a Component Video to VGA (D-Sub) adaptor cable and connect the end with 3 RCA type connectors to the Component Video output sockets of the
Краткое содержание страницы № 20
Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an S-Video source device: 1. Take an S-Video cable and connect one end to the S-Video output socket of the Video source device. 2. Connect the other end of the S-Video cable to the S-VIDEO socket on t
