Краткое содержание страницы № 1
OWNER’S MANUAL
DATA PROJECTOR
TDP-TW300
Others Maintenance Operations Preparations Before Using
Краткое содержание страницы № 2
Before Using SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND 5. Heat 8. Power-Cord Protection INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE The product should be situated Power-supply cords should be MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE away from heat sources such as routed so that they are not likely to REFERENCE. radiators, heat registers, stoves, or be walked on or pinched by items other products (including placed upon or against them, This unit is fully
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) e) If the product has been dropped or 10. Lightning storms 12. Do not place the product 15. Accessories damaged in any way (If the cabinet For added protection for this vertically Do not place this product on an should break, please handle with product during storm, or when it is unstable cart, stand, tripod, Do not use the product in the care to avoid injury) . left unattended and unused for bracket, or table. The product may upright position to proje
Краткое содержание страницы № 5
IMPORTANT SAFETY INSTRUCTIONS (Continued) POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. 19. Replacement Parts 22. Do not use the product in When replacement parts are a closed installation state. Plug Plug required, be sure the service Do not place the product in a box configuration Plug type Line voltage configuration Plug type Line voltage technician has used replacement or in any other closed installation Australian 200 – 240V parts
Краткое содержание страницы № 6
IMPORTANT PRECAUTIONS (Continued) OTHER CAUTIONS AND INFORMATIONS Avoid Volatile Liquid Copyrights Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or Showing or transmitting commercial imaging software or broadcast or cable-broad casting programs with the purpose of other than the personal and private viewing, including plastic products touching the unit for a long time. They will leave marks on the finish. modifying images using the freeze, resize, PI
Краткое содержание страницы № 7
CONTENTS Disconnecting USB memory .......................................................................... 50 Before Using Setting Wireless Utility ....................................................................................... 51 SAFETY PRECAUTIONS .................................................................................. 2 Functions ........................................................................................................ 51 IMPORTANT SAFETY INSTRUCTIONS .......
Краткое содержание страницы № 8
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. (8) (7) (6) (5) (7) (3)(2) (1) If any item is missing, please contact the store immediately where you purchased the product. (1) (5) (9) (6) (2) (7) (10) (3) (9) (10) (11) (10) (12) (13) (14) (15) (4) (8) (11) Back Front (See note) ■■ (1) Remote control ■■ (6) Power cord Name : Function ■■ (2) LR03 (SIZE AAA) batteries fo
Краткое содержание страницы № 9
Names of each part on the control panel and remote control Name : Main Function Control panel Remote Control (7) RETURN button : Goes back one screen. (8) Selection button : Menu selections and adjustments, volume control, etc. Laser light source p.38 (9) (11) (10) Remote control transmitter (12) FOCUS button : Adjusts the screen focus. (8) (17) (13) ZOOM button : Adjusts the screen size. (14) (12) p.50 (14) EASY SETUP button : Performs auto-adjustment. (4) (1) (16) (13) (15) LASER button : Sho
Краткое содержание страницы № 10
Label locations Name : Main Function p.20 (1) Infrared remote sensor : Senses commands from the remote control. (2) CONTROL terminal LAN : Connects a network cable. RS232C : When operating the projector via a computer, connect p.89 this to the controlling computer’s RS-232C port. (3) COMPUTER (Y/PB/PR) 2 IN terminal RGB : Input analog RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment. AUDIO : Input audio signals. (4) COMPUTER (Y/PB/PR) 1 IN
Краткое содержание страницы № 11
Approx. 5m Approx. 5m Preparing and using the remote control Operating a computer using the remote control A computer can be operated using the projector’s remote control. This function is available ■ Loading dry-cell batteries ■ Operating the remote on any computer with the Windows 98/98SE, Windows Me, Windows 2000, or Windows XP into the remote control control OS, that is equipped with a USB port which can support USB1.1 (The mouse remote q Remove the battery cover. Turn on the ON/OFF switch
Краткое содержание страницы № 12
Placement Placement Styles Projection Distance and Size As shown in the figures below, this device can be placed in 4 different styles. Use the figures, tables, and formulas below to determine the projection size and projection distance. The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the (Projection sizes are approximate values for full-size picture with no keystone adjustment.) p.44 Default setting menu , in accordance with your needs. Screen As seen from
Краткое содержание страницы № 13
Connection • The MONITOR OUT terminal outputs analog RGB signals or component video signals (Y/ Before connection PB/PR) from the COMPUTER 1 IN, COMPUTER 2 IN, or from the COMPUTER 3 IN • Read the owner’s manual of the device you are connecting to the projector. terminal as selected with the INPUT button. If no input is selected, the MONITOR OUT • Some types of computer cannot be used or connected to this projector. terminal outputs the input signals last selected among the COMPUTER 1 IN, COMPUT
Краткое содержание страницы № 14
Operations Turning the power on and off • The first time you use the projector after purchase, after the start-up screen disappears, ■ Connecting the power cord p.28 the start menu is displayed . Insert the power cord connector into 1 p.41 •You can disable the beep sound in the Display setting menu . the AC IN socket of the projector. p.44 • When [Key lock] is [On], the operation buttons of the projector do not work . • When [Password] is [On], the start-up screen is displayed after the Password
Краткое содержание страницы № 15
Basic operations Turn on the power. 5 Projector placement angle adjustments 1 p.26 Turn on the power by following the instructions in “Turning the power on” . The placement angle and the height of the projected image can be adjusted by the foot The Easy setup function works to automatically adjust the screen focus and correct the adjuster. keystone distortion. If RGB signals are input, auto-setting is also made. This operation q Lift up the front of the projector to p.26 does not take place when
Краткое содержание страницы № 16
Using handy features ■ Easy setup ■ Correcting the keystone distortion This function automatically adjusts the screen focus and corrects the keystone distor- When the projector placement angle against the screen is changed while projecting the tion (Auto focus and Auto keystone functions). image, the picture will undergo keystone (trapezoidal) distortion. Remote This projector is capable of correcting this keystone Control panel Control Remote distortion. Press the EASY SETUP button on the Contr
Краткое содержание страницы № 17
Using handy features (Continued) Remote Notes ■ Cutting off the picture and sound temporarily (Mute) Control • A message appears on the screen if the automatic keystone distortion correction fails. When you want to project the images of another projector, overhead • Depending on the amount of keystone adjustment and the content of images, some projector, etc. temporarily, this projector’s images and sound can be information may be lost, or the picture quality may suffer. turned off. •To manually
Краткое содержание страницы № 18
Using handy features (Continued) ■ Display a sub screen (PIP function) ■ Displaying two screens (SPLIT function) Remote Remote Control Control Another image can be added in smaller size This function displays two screens at a time. (referred as sub screen in this manual) to the Press the remote control’s SPLIT button. projected image (referred as main screen). The projected image moves to the left (main Press the remote control’s PIP screen), and a new image is displayed to button. the right (su
Краткое содержание страницы № 19
Using handy features (Continued) How to set password (from [Off] to [On]) ■ Screen combination of PIP and SPLIT functions 1 Select [Password] in the Default setting menu and press the or Group Input signal button. The password setting confirmation screen is displayed. ([OK] or [Cancel]) A Computer 1 (Digital) / Y/PB/PR 1 (Digital) 2 Select [OK] and press the button. Computer 1 (Analog) / Y/PB/PR 1 (Analog) The password entry screen is displayed. Computer 2 / Y/PB/PR 2 3 Enter a four-digit num
Краткое содержание страницы № 20
Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using ■ The image adjustment menu p.16 the operation buttons on the control panel (main unit side) and remote control. Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, ■ How to use the menus it indicates that you cannot select for the current input.) The menu shown below
