Краткое содержание страницы № 1
Audio/visual equipment setup guide
m
1
a
b
ucla department of information studies multimedia and
information technology lab
written by david cappoli and todd boostrom 8/2000
Краткое содержание страницы № 2
Table of Contents Using the Cassette Player in Room 111—Cheat Sheet 3 Setting Up and Displaying a Laptop Computer in Room 111 4 Using the Mitsubishi Portable Projector 8 Setting Up and Displaying Mobile Workstations in Room 111—Cheat Sheet 10 Setting Up and Displaying Mobile Workstations in Room 111—Step-bv- Setting Up and Displaying Mobile Workstations & Video Output Simultaneously 18 Using the P.A. System in Room 111 21 Using the Sharp Portable Projector—Cheat Sheet 22 Using Video Output in Ro
Краткое содержание страницы № 3
Using the Cassette Player in Room 111 - Cheat Sheet Brief instructions on using the stationary cassette player in room 111 1.0 On PRIMARY CONTROL (Console #1) 1.1 Select Power ON (button lit). 1.2 Select Ceiling speakers ON (button lit). 2.0 On RECEIVER (Console #1) 2.1 RECEIVER should be ON (text is shown in display window). 2.2 Select TAPE DECK button (displayed text: TAPE). Please Note: The volume knob on the PRIMARY CONTROL is for the ceiling speakers. The volume knob on the RECEIVER is for
Краткое содержание страницы № 4
Setting Up and Displaying Laptop Computers in Room 111 Instructions on setting up and projecting a laptop computer display in room 111 Please note that most laptops cannot be connected to the network and may not be able to access the Internet. Contact Justin or David for more info. 1.0 Initial setup 1.1 Be sure to have the dark gray cable which has both monitor and speaker connections on each end, and which is labeled for laptops (kept on the podium in Room 111). 1.2 The laptop should be kept on
Краткое содержание страницы № 5
4.0 On SWITCHER (Console #1) [see Image below and Figure Bl Figure B CPUl CPU2 VCR1 VCR2 LDP1 I/O Control Power Enter Preset View Esc RGBS Audio PROJ1 PROJ2 PROJ1 PROJ2 CPU CPU VIDEO VIDEO Audio output 4.1 Power should be ON (button lit). 4.2 Deselect all buttons under the labels CONTROL and I/O (lights above buttons should be OFF). 4.3 Under the label I/O, Select the button RGBS (light should come on). 4.4 Select button CPU1 or CPU2 (red light should come on). 4.5 If any green lights come on el
Краткое содержание страницы № 6
• PR0J2 CPU button is for the projector nearest the windows. **Both projectors can be chosen if both screens are being used for display. 4.7 Press ENTER button [on the right side of switcher under "Control" label]. 5.0 Projector Remote Control (Should be on classroom podium) Note: remote control does not work well with fluorescent lights on. 5.1 Take the remote control, point it towards the projector you are using, and press the blue button on the upper left-hand corner. This is the power button
Краткое содержание страницы № 7
The following additional steps are necessary only if audio output is required (the speaker wire, which is attached to the cable kept on the podium, needs to connected to either the CPU1 or CPU2 wall plate from the workstation). Please Note: The volume knob on the PRIMARY CONTROL is for the ceiling speakers. The volume knob on the RECEIVER is for the speakers on either side of the whiteboard. 6.0 On SWITCHER 6.1 Under the I/O label: Deselect the RGBS button (light should go off). 6.2 Under the I/
Краткое содержание страницы № 8
Using the Mitsubishi Portable Projector - Cheat Sheet Brief instructions on setting up and projecting using the Mitsubishi portable projector in any room 1.0 Setup 1.1 Connect computer's network cable and plug in its power cord. 1.2 Connect extension cables kept with workstation (if not already connected): a) one extension to monitor port on cpu (adapter needed with Mac) b) the other extension to the monitor cable. 1.3 Connect the projector's black RGB cable***: a) one end to the COMPUTER 1 IN p
Краткое содержание страницы № 9
3.0 Remote Control Additional Features (Remote should be with the projector) Note: remote control does not work well with fluorescent lights on. 3.1 If you no longer need the projector, or if it will be turned off for more than 10 minutes, press the blue power button on the remote. This will turn off the projector. Please note that you cannot immediately turn the projector back on. It takes a few minutes for it to cool down and can be turned back on when you see a solid red light on the projecto
Краткое содержание страницы № 10
Setting up and Displaying the Mobile Workstations in Room 111- Cheat Sheet Brief instructions for using the Room 111 mounted projectors to display images and output sound from the Lab's PC and Mac mobile workstations. These instructions assume that you have connected all of the workstation's cables. For complete setup instructions, see Setting Up and Displaying Mobile Workstations in Room 111 - Step-by-Step 1.0 On PRIMARY CONTROL (Console #1) 1.1 Power ON. 1.2 Ceiling speakers ON. 2.0 On RECEIVE
Краткое содержание страницы № 11
4.3 If you no longer need the projector, or if it will be turned off for more than 10 minutes, press the blue power button on the remote. This will turn off the projector. Please note that you cannot immediately turn the projector back on. It takes a few minutes for it to cool down and can be turned back on when you see a solid red light on the projector. *** To temporarily turn projector off, press MUTE on the remote. Projector will turn itself back automatically in 10 minutes, or when you pres
Краткое содержание страницы № 12
Setting up and Displaying the Mobile Workstations in Room 111- Step-by-Step Instructions for using the Room 111 mounted projectors to display images and output sound from the Lab's PC and Mac mobile workstations. 0.0 Initial setup 0.1 Move computer into 111 with the following items on the cart or in the cart's basket. Each mobile workstation has its own set of labeled cables for 111. • 2 beige extension cables: 1 attached to the cpu (adapter needed for Mac) --1 attached to the monitor cable. The
Краткое содержание страницы № 13
Figure A Power cord outlets Wall Jacks on south wall 0.3 Confirm that the network cable is connected securely from the back of the computer to either the 101D1 or 101D2 outlet. 0.4 Connect the extension cable attached to the cpu to the longer length of the split dark, gray cable, [see Figure B]. Figure B PC Computer o o o I o HI O o o o Extension from cpu connects here Network cable connection 13
Краткое содержание страницы № 14
Macintosh o o T Network Extension from cpu connects here (adapter connection needed) 0.5 Connect the extension that is attached to the monitor cable to the shorter length of the split dark, gray cable. 0.6 Connect the other side of the split, dark gray cable to CPU1 or CPU2. 0.7 Once all cables are connected, turn on workstation and monitor. 1.0 On PRIMARY CONTROL (Console #1) This provides power to all of the components in the console, and to the ceiling speakers. It does not control power to t
Краткое содержание страницы № 15
computer, either PROJ1/CPU, PR0J2/CPU, or BOTH). If needed, you can also use the Switcher to output sound from a computer. Figure C Switcher CPUl CPU2 VCR1 VCR2 LDP1 I/O Control Power Enter Preset View Esc RGBS Audio PROJ1 PROJ2 PROJ1 PROJ2 CPU CPU VIDEO VIDEO Audio output 3.1 Power should be ON (button lit). 3.2 Deselect all buttons under the labels CONTROL and I/O (lights above buttons should be OFF). 3.3 Under the label I/O, Select the button RGBS (light should come on). 3.4 Select button CPU
Краткое содержание страницы № 16
**Both projectors can be chosen if both screens are being used for display. 3.7 Press "ENTER" button [on the right side of switcher under "Control" label]. 4.0 Projector Remote Control (Should be on classroom podium) Note: remote control does not work well with fluorescent lights on. 4.1 Take the remote control, point it towards the projector you are using, and press the blue button on the upper left-hand corner. This is the power button. It will take up to a minute for the projector to warm up.
Краткое содержание страницы № 17
The following additional steps are necessary only if AUDIO OUTPUT is required. Please note that the speaker wire kept in the cart's black basket needs to connected to either the CPU1 or CPU2 wall plate from the workstation's speaker port )) (green-colored port on PC). Please Note: The volume knob on the PRIMARY CONTROL is for the ceiling speakers. The volume knob on the RECEIVER is for the speakers on either side of the whiteboard. 5.0 On SWITCHER 5.1 Under the I/O label: Deselect the RGBS butto
Краткое содержание страницы № 18
Setting Up and Displaying Mobile Workstations & Video Output Simultaneously in Room 111 Brief instructions for using the Room 111 mounted projectors to simultaneously display images from one of the Lab's mobile workstations, and from the room's VHS video recorder/player, the U- Matic video player, or the laserdisc player. These instructions assume that you have connected all of the workstation's cables. For complete setup instructions, see MOBILE WORKSTATIONS in 111 - Step-by-Step and VIDEO OUTP
Краткое содержание страницы № 19
back on. It takes a few minutes for it to cool down and can be turned back on when you see a solid red light on the projector. *** To temporarily turn projector off, press MUTE on the remote. Projector will turn itself back automatically in 10 minutes, or when you press MUTE again. 5.0 On SWITCHER (Console #1) 5.1 Power should still be ON. 5.2 Deselect all buttons under the labels CONTROL and I/O. 5.3 Under the label I/O, Select the button RGBS. 5.4 Select button VCR1 (for VHS VCR) or VCR2 (for
Краткое содержание страницы № 20
for it to cool down and can be turned back on when you see a solid red light on the projector. To temporarily turn projector off, press MUTE on the remote. Projector will turn itself back automatically in 10 minutes, or when you press MUTE again. 8.0 On VCR, U-Matic or Laserdisc (Console #2) 8.1 Power ON to VCR1 (VHS VCR), VCR2 (U-Matic) or LDP1 (Laserdisc). 8.2 Insert and start playing video or disc. 9.0 Clean up 9.1 Power OFF to Projectors. 9.2 Remove video or disc from player. 9.2 Power OFF t
