Краткое содержание страницы № 1
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
INSTRUCTION MANUAL
VCC-WB4000
Network Camera
About this manual
Before installing and using this unit, please read this manual carefully. Be sure to keep it
handy for later reference.
Краткое содержание страницы № 2
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Contents Information to user ........................................2 Alarm Detection and Recording ................ 40 A Using Only Post-alarm Recording .......... 40 Precautions .................................................3 B Pre-alarm/Post-alarm Recording ........... 40 Features .....................................................4 Recording New Alarm Data ..................... 41 Accessories .................................................4 Fixed S
Краткое содержание страницы № 3
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Information to user This equipment has been tested and found to Safety Guard comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide THIS SYMBOL INDICATES THAT reasonable protection against harmful THERE ARE IMPORTANT interference in a residential installation. This OPERATING AND MAINTENANCE equipment generates, uses, and can radiate INSTRUCTIONS IN THE radio frequency energy and, if not i
Краткое содержание страницы № 4
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Precautions In case of problem Protect from humidity and dust Do not use the camera if smoke or a strange To prevent damages to the camera, do not odour comes from the unit, or if it seems not to install it where there is greasy smoke or steam, function correctly. Disconnect the power cord where the dampness may get too high, or where immediately, and consult your dealer (or a there is a lot of dust. Sanyo Authorized Service Centre). Protect from high temperat
Краткое содержание страницы № 5
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Features Accessories Web Server Function 1 Setup CD-ROM . . . . . . . . . . . . . . . . . . . 1 pc. This camera is equipped with a web server 2 Lens iris plug (4-pin). . . . . . . . . . . . . . . . 1 pc. function. The camera can be accessed using a computer’s web browser in order to view the 3 Ferrite core. . . . . . . . . . . . . . . . . . . . . . . 2 pc. camera images. In addition, up to a maximum of 16 users can simultaneously access a single camera on the
Краткое содержание страницы № 6
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Name and Function of Each Part 4 5 3 PC CARD MONITOR ETHERNET RS-232C OUT 1 6 AC24V GND D/N IN COM PC POWER 1 2 3 7 MODEM DC12V ALARM IN OUT CLASS 2 WIRING 2 1 Lens mount cap 3 Flange back locking screws (p. 8) Attach this cap to protect the lens mounting 4 Flange back adjustment dial (p. 8) section. When using the camera, remove the 5 PC CARD slot cap and attach the automatic iris-type lens (sold separately). Use this slot to insert a memory card or wireles
Краткое содержание страницы № 7
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Name and Function of Each Part I PC CARD H MONITOR ETHERNET RS-232C OUT 8 G AC24V GND D/N IN COM PC POWER 1 2 MODEM DC12V ALARM IN OUT CLASS 2 WIRING JF 9 8 Link indicator F Power supply input terminals (AC24V, DC12V, GND) This indicator illuminates when the camera is connected to a network. It flashes while data G RS-232C connector transmission is in progress. Use this connector to connect the camera to The indicator switches off when the camera a modem
Краткое содержание страницы № 8
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Attaching the Lens Use a DC-type automatic iris-type lens (sold separately). 1 Remove the lens mount cap. 3 Connect the lens iris plug to the lens iris output connector of the camera. (–) control coil (+) drive coil 1 3 (+) control coil (–) drive coil 2 4 2 1 2 1 3 4 3 4 2 Attach the CS mount-type lens. (Connecting to the lens iris plug) Note: Lenses from other manufacturers may have The “L” part of the lens different plug shapes and specifications. In such sh
Краткое содержание страницы № 9
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Flange Back Adjustment The flange back is the distance between the lens (sold separately) and the image capturing surface of the camera. It is adjusted at the time of shipment from the factory to accommodate the types of lenses that are generally assumed to be in use. Accordingly, the flange back does not normally need to be adjusted. However, if attaching a zoom lens and changing from wide angle to telephoto, the images may not be captured in proper focus, an
Краткое содержание страницы № 10
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Connections Turn off the power for all equipment before making any connections. Basic Connections 1 Connect the camera to a computer. Connect a cable between the ETHERNET connectors of the camera and the computer. Use a crossed wire-type Ethernet cable. 2 Connect the power supply. After connecting the power supply, install the supplied ferrite core A to the power cord. If using a commercially-available 24 V AC adapter, always be sure to connect the ground wire
Краткое содержание страницы № 11
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Connections Connecting to a LAN Connecting to the Internet Use an Ethernet cable to connect the Use an Ethernet cable to connect the ETHERNET connector of the camera to the ETHERNET connector of the camera to a device LAN’s Ethernet switching hub. such as a router or ADSL modem that is connected to the Internet. Use a straight-type Ethernet cable. If connecting to a router, use a straight-type Ethernet cable. If connecting to an ADSL modem or to some other
Краткое содержание страницы № 12
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings In order to use the camera as a network camera, you must make the following settings in the order given. 1 Installation of Plug-in Software to the Computer Computer (p. 12) Insert the contents of the supplied setup CD-ROM to the computer. Note: The same setup CD-ROM is supplied with both the network camera and the network video server. You can use either CD-ROM to carry out the installation. 2 Wired LAN Settings (p. 15) Conn
Краткое содержание страницы № 13
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings 1 Installation of Plug-in Software to the Computer Install the plug-in software (on the setup CD-ROM) onto the computer that is to be used. Installing the plug-in software makes it possible to view live images from network cameras using the computer’s web browser. 1 Turn on the power for the computer. 6 Click the [Next] button. After Windows has loaded, continue to the next step. 2 Insert the setup CD-ROM into the CD-ROM dri
Краткое содержание страницы № 14
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings 8 Type in your username and organization 10 Click the [Finish] button. name, and then click the [Next] button. This completes the installation of the plug-in software. 9 Click the [Install] button. Installation of the software will start and the window display will change to show the (Uninstalling the plug-in software) installation progress. To uninstall the plug-in software, select “Add/Remove Programs” from the Windows Con
Краткое содержание страницы № 15
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings Browser Settings Cookie Settings Check that the Security settings for Microsoft The camera uses cookies. Internet Explorer are set as described below. If using Internet Explorer Version 6.0 as the web Select Internet Options from the Tools menu, browser, select Internet Options from the Tools click the Security tab and then click the Custom menu, click the Privacy tab, move the slide bar Level button to display the settings.
Краткое содержание страницы № 16
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings 2 Wired LAN Settings Once the plug-in software has been installed, use the computer’s web browser to access the camera. Note: The network camera handles large volumes of image data that has been compressed into JPEG2000 format. In order to provide smooth access to the camera, you should close any other applications that you do not need to have open. 1 Use an Ethernet cable to connect the 4 Type in the username (ID3) and the
Краткое содержание страницы № 17
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings Initial Camera Screen The initial screen is displayed once the network camera and the computer have been set. The initial screen contains the buttons that are required for making various settings, and it also shows live images from the network camera that have been compressed into JPEG2000 format. 5 67 8 F GH 9 I 1 J 2 3 4 1 Image quality mode select buttons Selects the quality for the live images that are FINE: • being tran
Краткое содержание страницы № 18
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings 2 Menu select buttons 3 Network disconnect button The live image display area and setting area changes when you click on one of these buttons. [LIVE VIEW] button • Click this button to shut down operation of the Live images can be monitored. network camera. The following message will be [VIEW FRAME] button displayed when this button is clicked. To • Sets the live image display area to a fixed reconnect the camera, click the
Краткое содержание страницы № 19
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings 6 ALARM DATA indicator 8 BEEP OFF indicator (p. 34) Lit red: (alarm recording image playback If “ALARM SOUND MODE” is set to “USE”, this • is possible) display appears at the same time as the buzzer sounds when an alarm is detected. Click the Internal memory or expanded memory indicator to stop the alarm buzzer from sounding. (installed in the PC card slot) is filled by alarm recording images. The alarm buzzer will stop auto
Краткое содержание страницы № 20
L5AM2/US (VCC-WB4000) GB 2003, 6, 6 Network Camera (Wired LAN) Settings G RESOLUTION and EXPANSION settings H IMAGE MODE setting (default settings: 640x480, x1) (default setting: COLOR) Select the image resolution from the Select whether live images are to be displayed in • drop-down list box. The volume of data color or black and white from the drop-down list transmitted will be larger when a higher box. resolution is selected. If you select “GRAY” for black and white images, Use the drop-down
