Руководство по эксплуатации Panasonic PT-F200

Краткое содержание страницы № 1

S PEC F ILE
Product Number : PT-F200
Product Name : LCD Projector
As of October 2008. Appearance and specifications are subject to change without notice. < 1 >

Краткое содержание страницы № 2

S PEC F ILE LCD Projector PT-F200 Specifications Power supply 100–240 V AC, 50/60 Hz Power consumption 330 W (Approx. 4.5 W in standby mode with fan stopped.) Optical system Dichroic mirror separation/prism synthesis system LCD panel Panel size 0.7˝ (17.78 mm) diagonal, 4:3 aspect ratio Display method Transparent LCD panel (x 3, R/G/B) Drive method Active matrix Pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels Pixel configuration Stripe Lens Manual zoom (1:1–1:2), manual focus F 1.7–2

Краткое содержание страницы № 3

S PEC F ILE LCD Projector PT-F200 Dimensions (W x H x D) 432 x 124.5 x 319 mm (17˝ x 4-29/32˝ x 12-9/16˝) Weight 6.2 kg (13.7 lbs.) Operating environment Temperature 0°–40°C (32°–104°F) Humidity 20%–80% (no condensation) Remote control unit Power supply 3 V DC (AA battery x 2) 2 Operation range* Approx. 15 m (49´3˝) when operated from directly in front of the signal receptor Dimensions (W x H x D) 48 x 163 x 24.5 mm (1-7/8˝ x 6-13/32˝ x 31/32˝) Weight 117 g (4.1 oz) (including batteries) Supplie

Краткое содержание страницы № 4

S PEC F ILE LCD Projector PT-F200 Terminals 1 LAN 35 2 Computer 1 input 12 4 6 3 Computer 2 input/computer 1 output 4 S-Video input 5 Video input 6 Component input 7 Audio input for component/S-Video/video 8 Serial input 9 Remote input 10 Audio input for computer 1 78 9 11 11 Audio input for computer 2 10 12 Audio output Standard setting-up positions unit : mm (inch) Ø49 Upper edge of projected image (1-15/16˝) Ø43 (1-11/16˝) L 195 Projected image (7-11/16˝) L Lower edge of projected image A: Di

Краткое содержание страницы № 5

S PEC F ILE LCD Projector PT-F200 Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 4:3 minimum L (m) = (diagonal screen size in inches) x 0.0304 - 0.048 maximum L (m) = (diagonal screen size in inches) x 0.0606 - 0.057 NOTE: Distances calculated with the above equations will include a slight error. Shift range Optical axis shift function allows to shift the position of a projected image as

Краткое содержание страницы № 6

S PEC F ILE LCD Projector PT-F200 Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 110 MHz. The display resolution of this projector is 1,024 x 768 pixels. If the display resolution indicated in the above data exceeds this resolution, image compression will be used to con- vert the input signal to 1,024 x 768 pixels. List of compatible signals Displa

Краткое содержание страницы № 7

S PEC F ILE LCD Projector PT-F200 Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, com- mands must be input through communication software, based on the format and satisfying the commu- nication conditions shown below. Pin assignments and signal names No.Signal name No.Signal name Description Signal name 6 9 1 – 6 – NC NC 2 TXD 7 CTS Send data Connected internally 3 RXD 8 RTS Receive data Connected internally 4 – 9 – Connected intern

Краткое содержание страницы № 8

S PEC F ILE LCD Projector PT-F200 Control commands Command: Function Callback: Parameter value Min Max 1 PON* Power on (standby mode on) PON – – 1 POF* Power off (standby mode off) POF – – AVL: Volume control AVL: 0 63 IIS: Input signal selection IIS: – – OST The same function as “default” button OST – – OFZ: Freeze OFZ: 0 1 OEN Enter OEN – – OXG: Wide mode OXG: 0 1 VPM: Picture mode: Natural VPM:

Краткое содержание страницы № 9

S PEC F ILE LCD Projector PT-F200 Parameter format Parameter format Size (Byte) Difinition 3 (1 or 2 bytes also Dicimal without signs: 0-999 (000, 001, 002...999) possible when Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99) under control) Callback from the projector is 3 Byte. 1 0 = off, 1 = on 3 RG1 = computer 1, RG2 = computer 2, NWP = network, YUV = component, VID = video, SVD = S-Video 1 0 = front, 1 = rear, 2 = ceiling and front,

Краткое содержание страницы № 10

S PEC F ILE LCD Projector PT-F200 Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector's exhaust open- ings. In addition to this space, also ensure that there is a sufficient work space for removing and installing the lam