Краткое содержание страницы № 1
LCD
Projector
User Manual
X400
MODEL LVP-X400U
EN – 1
ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH
Краткое содержание страницы № 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equi
Краткое содержание страницы № 3
Contents Important safeguards..........................................................................4 Overview ................................................................................................ 6 Using the remote control ..................................................................... 8 Battery installation ......................................................................................................... 8 Installation ................................................
Краткое содержание страницы № 4
Important safeguards 10. Power sources Please read all these instructions regarding your LCD This projector should be operated only from the projector and retain them for future reference. Follow type of power source indicated on the marking all warnings and instructions marked on the LCD pro- label. If you are not sure of the type of power, jector. please consult your appliance dealer or local power company. 1. Read instructions All the safety and operating instructions should 11. Power-cord pr
Краткое содержание страницы № 5
Do not touch Air outlet grill and Bottom WARNING: plate which becomes hot. Unplug immediately if there is something Do not touch them or put other equipment in front of wrong with your projector. Air outlet grill. The heated Air outlet grill and Bot- Do not operate if smoke, strange noise or odor comes tom plate may cause injury or damage to other equip- out of your projector. It might cause fire or electric ment. Also, do not set the projector on the desk which shock. In this case, unplug imme
Краткое содержание страницы № 6
Overview 4 65 1 Air inlet grill (Front) 7 2 Terminal board 3 Air outlet grill 4 Speaker (Left/Right) 5 Control panel 6 Remote control sensor (Front) 7 Lens 8 Remote control sensor (Rear) 3 9 Kensington Security Lock Standard 2 connector 10 Easy-carry handle 1 89 10 Control panel 1 Power button 2 – (VOLUME) button 14 13 12 3 COMPUTER button 4 MENU button LAMP TEMP 5 AUTO POSITION button 1 11 ZOOM/ 6 MUTE button FOCUS 2 10 7 Direction buttons VOLUME COMPUTER VIDEO 8 ENTER button 3 9 9 VIDEO button
Краткое содержание страницы № 7
Bottom side 1 1 Release buttons (Left/Right) 2 Adjustment foot (Left/Right) 3 Air inlet cover 4 Lamp cover 2 Caution: Do not replace the lamp right after using the projector. The lamp will be very hot. 3 4 1 Power button Remote control 2 COMPUTER button 3 AUTO POSITION button 4 MENU button 19 5 Right click button (For mouse) 6 EXPAND button KEYSTONE 18 1 7 PinP button ZOOM/ COMPUTER VIDEO FOCUS 17 8 Wired remote control jack 2 16 AUTO VOLME POSITION 9 MUTE (Audio/Video) button 10 STILL button 3
Краткое содержание страницы № 8
Using the remote control Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). 3. Replace the back cover. 12 3 Important: • Do not use a new battery with an old one. • Load batteries in the correct position. • Do not heat, take apart, or throw batteries into fire. • Do not try to recharge batteri
Краткое содержание страницы № 9
Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection Width To find the approximate distance Screen A B between the projector and screen: Multiply the width of the screen Screen x 1.9 (min.) , Multiply the width of the screen x 2.4 (max.). A=B • Refer to the chart for recom- mended distances in maximum (between the screen and the L head of the projector) zoom and minimum zoom. Distance from screen (L) /
Краткое содержание страницы № 10
Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the main power cable. • If connected units are set too close to one another, the image may be affected. • Refer to the owner's guide of each component for details of connections. Projector + AV equi
Краткое содержание страницы № 11
Projector + Personal computer For computer with Mini D-SUB 15P terminal (IBM PC or IBM PC compatibles etc.) RGB cable for PC to COMPUTER IN (Mini D-SUB 15P) computer USB RS-232C INPUT SELECT COMPUTER 1 IN REMOTE AUDIO 1 IN VIDEO 1 VIDEO 2 IN IN DIGITAL ANALOG COMPUTER 2 IN S-VIDEO AUDIO 2 IN MAIN VIDEO OI COMPUTER OUT AC IN AUDIO OUT L AUDIO to monitor R port to COMPUTER to COMPUTER AUDIO IN AUDIO OUT to PC audio OUT MONITOR OUTPUT output PC audio cable (option) RGB cab
Краткое содержание страницы № 12
Preparing the projector for operation Getting ready for projection Adjusting the angle of projection 1. Connect the power cord provided to the projector. For the best result, project onto a flat screen with a 90 2. Connect the power cord to the wall power outlet. degree angle to the floor. If necessary, tilt the projector 3. Remove the lens cap. by adjusting two foot adjustments on the bottom of the projector. Warning: • Do not look directly into the lens when projector is “ON”. • The lens cap i
Краткое содержание страницы № 13
To operate projector power ON USB RS-232C COMPUTER 1 IN INPUT SELECT AUDIO 1 IN REMOTE VIDEO 1 VIDEO 2 IN IN DIGITAL ANALOG COMPUTER 2 IN S-VIDEO AUDIO 2 IN MAIN VIDEO 3 , 9 , 10 OI KEYSTONE COMPUTER OUT AC IN AUDIO OUT L AUDIO COMPUTER ZOOM/ VIDEO FOCUS 4 R AUTO VOLME 5 , 7 AUTO POSITION POSITION button MENU LASER 6 , 8 2 , 11 LAMP TEMP ZOOM/ 3 , 9 , 10 FOCUS 5 , 7 RIGHT CLICK VOLUME 6 , 8 COMPUTER VIDEO ENTER 4 4 MENU STILL button ENTER EXPAND P in P STILL MUTE button
Краткое содержание страницы № 14
To operate projector power ON (Continue) AV mute Turning off the projector Image and audio are temporarily muted by pressing 9. Press the POWER button. the MUTE button. To restore the image and audio to The message “POWER OFF? YES : PRESS AGAIN” the normal mode, press the MUTE button again. appears on the screen. • To prevent the damage of the LCD, the image and • To exit from this mode, press any button except audio will be restored automatically to the normal POWER, LASER, mouse pointer, R/L-
Краткое содержание страницы № 15
Menu operation RED ± 30 PICTURE CONTRAST ± 30 YELLOW ± 30 BRIGHTNESS ± 30 GREEN ± 30 COLOR MATRIX 1 CYAN ± 30 2 BLUE ± 30 USER USER MAGENTA ± 30 OFF SATURATION ± 5 COLOR TEMP. STANDARD CONTRAST R ± 30 HIGH CONTRAST B ± 30 LOW BRIGHTNESS R ± 30 USER BRIGHTNESS B ± 30 SHARPNESS ± 10 TINT ± 10 (Displays only when the source is selected to VIDEO) COLOR ± 10 (Displays only when the source is selected to VIDEO) INSTALLATION KEYSTONE -15˚, -12˚, -9˚, -6˚, -3˚, 0˚, +3˚, +6˚, +9˚, +12˚, +15˚ AUTO POW
Краткое содержание страницы № 16
Menu operation (continued) 1 PICTURE Opt CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher XGA60 as the number increases. IMAGE BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as CONTRAST 0 the number increases. BRIGHTNESS 0 COLOR MATRIX. ......Adjusts color balance in each color of the image. See page COLOR MATRIX USER 18. COLOR TEMP. STANDARD COLOR TEMP.. .. Adjusts color temperature. See page 18. SHARPNESS 0 SHARPNESS ...... Adjusts the picture s
Краткое содержание страницы № 17
4 SIGNAL Opt MEMORY CALL ........Use to select AUTO, USER 1 or USER 2. See below. XGA60 HORIZ. POSITION ....Use to adjust the horizontal position of the image. SIGNAL VERT. POSITION .....Use to adjust the vertical position of the image. A MEMORY CALL AUTO U FINE SYNC. ....... Use to synchronize the projector with PC input signals so HORIZ. POSITION 0 that the image is not blurred. VERT. POSITION 0 TRACKING ......... Use to avoid image noise such as wide stripes. FINE SYNC. 0 COMPUTER INPUT ....T
Краткое содержание страницы № 18
Picture adjustment Adjusting the image 5. Press the $ or % button to adjust the color balance You can adjust the picture by using the IMAGE menu. of the color. 6. Repeat steps 4 and 5 for more adjustments. Opt XGA60 7. Exit the menu system by pressing the MENU but- IMAGE ton several times. CONTRAST 0 BRIGHTNESS 0 • When using the setting which has been already COLOR MATRIX USER prepared, select 1 (for VIDEO input) or 2 (for COMPUTER input) in step 3. COLOR TEMP. STANDARD • When not using Color
Краткое содержание страницы № 19
Top part of image curves : Adjustment from personal computer Change the setting of HOLD in SIGNAL menu or Although this projector sets proper signal systems PLL in SIGNAL - USER menu. automatically for the image signal from personal HOLD ...Select ON, and adjust BEGIN or computers, it cannot be applied to some of personal END for image which top part is the computers. In this case, press the AUTO POSITION least curved. button. If the images are still not projected
Краткое содержание страницы № 20
Picture adjustment (continued) Specification of RGB signals in each computer mode of the projector Signal mode resolution horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 1024 x 768 – TV50 – 15.63 50.00 1024 x 768 – 1080i – 33.75 60.00 1024 x 576 – 720p – 45.00 60.00 1024 x 576 – PC98 640 x 400 24.82 56.42 1024 x 640 640 x 400 CGA70 640 x 400 31.47 70.09 1024 x 640 640 x 400 CGA85 640 x 400 37.86 85.08 1024 x 640 640 x 400 VGA60
