Руководство по эксплуатации Hitachi CP-RX82

Краткое содержание страницы № 1

Projector
CP-RX82
User's Manual (detailed)
Operating Guide – Technical
Example of PC signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode
720 x 400 37.9 85.0 VESA TEXT
640 x 480 31.5 59.9 VESA VGA (60Hz)
640 x 480 37.9 72.8 VESA VGA (72Hz)
640 x 480 37.5 75.0 VESA VGA (75Hz)
640 x 480 43.3 85.0 VESA VGA (85Hz)
800 x 600 35.2 56.3 VESA SVGA (56Hz)
800 x 600 37.9 60.3 VESA SVGA (60Hz)
800 x 600 48.1 72.2 VESA SVGA (72Hz)
800 x 600 46.9 75.0 VESA SVGA (75Hz)
800 x 600 5

Краткое содержание страницы № 2

Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Active video (C) Active video (c) Data Data H. Sync. V. Sync. Sync (A) Sync (a) Horizontal signal timing (μs) Vertical signal timing (lines) Resolution Signal mode (H x V) (A) (B) (C) (D) (a) (b) (c)

Краткое содержание страницы № 3

Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. A B A B COMPUTER IN, MONITOR OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL level • V ideo signal: -Y, Analog, 1.0±0.1Vp-p with composite s

Краткое содержание страницы № 4

Connection to the ports (continued) C D C S-VIDEO 4 3 Mini DIN 4pin jack 1 2 • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL (60Hz) Pin Signal Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator 1 Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator 2 Brightness signal, 1.0Vp-p, 75Ω terminator 3 Ground 4 Ground D VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL (60Hz) • 1.0±0.1Vp-p, 75Ω terminator 4

Краткое содержание страницы № 5

Connection to the ports (continued) E F E AUDIO IN Ø3.5 stereo mini jack • 200 mVrms 47kΩ terminator F AUDIO OUT Ø3.5 stereo mini jack • 200 mVrms 1kΩ output impedance 5

Краткое содержание страницы № 6

Connection to the ports (continued) To input component video signal to COMPUTER IN ports ex. D-sub plug RCA plugs RCA connectors Y CB/PB CR/PR COMPONENT VIDEO OUT VCR/DVD/Blu-ray Disc player To input component video signal to the COMPUTER IN port of the projector, use a RCA to D-sub cable or adapter. For about the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN port ( &3). 6