Краткое содержание страницы № 1
LCD Data Video Projector
Projector
Concise User’s Manual
CP-RX82
MODEL 8788
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
Information in this Guide may change due to product improvements. To obtain the latest
manuals, literature, and software please visit the Dukane web sit
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Projector 8788 User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product. See “Using the CD manual” ( 15) to read the manuals in the CD. After reading them, store them in a safe place for future reference. ►Heed all the warnings and cautions in the manuals or on the product. ►Follow all the ins
Краткое содержание страницы № 4
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage. NOTICE This entry notices of fear of causing trouble. Important safety instruction The followings are import
Краткое содержание страницы № 5
Regulatory notices About Electro-Magnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI - Dukane Model Number CP-RX82 - 8788 Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the follo
Краткое содержание страницы № 6
Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb,
Краткое содержание страницы № 7
Preparations Loading batteries into the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. 13 2 Holding the hook part of the battery 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL, Part No.LR6 or R6P) according to their
Краткое содержание страницы № 8
Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. Do not place or attach anything that would block the len
Краткое содержание страницы № 9
Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. To input component video signal to COMPUTER IN port, please see the “Operating Guide” in the CD. Monitor PC RGB IN AUDIO OUT RGB OUT Speakers (with an L R L R Y CB/PB C R/PR L R S-VIDEO OUT
Краткое содержание страницы № 10
Connecting power supply Put the connector of the power cord into the 1. AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the 2. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER ON AC IN function activated, the connection of the power supply Power cord make the projector turn on. WARNING ►Please use extra caution when connecting the power cord, as inc
Краткое содержание страницы № 11
Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees. This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is adjustable while pulling up the elevator knob on the same side as it. Holding the proj
Краткое содержание страницы № 12
Displaying the picture Activate your signal source. Turn the signal MY SOURCE/ COMPUTER VIDEO DOC.CAMERA 1. source on, and make it send the signal to AUTO ASPECT SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP the projector. ON VOLUME+ button DOWN OFF VOLUME- button Use the VOLUME + / VOLUME - buttons KEYSTONE MY BUTTON MUTE 12 2. MUTE button to adjust the volume. MENU POSITION To have the projector silent, press the MUTE ENTER button on the remote control. ESC RESET Press the INPUT but
Краткое содержание страницы № 13
Turning off the power STANDBY/ON button Press the STANDBY/ON button on the 1. POWER indicator projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again 2. while the message appears. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK The projector lamp will go off, and the MAGNIFY FREEZE PAGE UP VOLUME ON OFF DOWN KEYSTONE MY BUTTON MUTE 12 POWER indicator will begin blinking in POSITION MENU E
Краткое содержание страницы № 14
Replacing the lamp A lamp has fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Lamp cover Type number : 456-8788 Turn the projector off, and unplug the power cord. 1. A
Краткое содержание страницы № 15
Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, if the bulb bursts, it is possible for shards of glass to fl y into the lamp housing, and for gas containing mercury and
Краткое содержание страницы № 16
Cleaning and replacing the air fi lter Please check and clean the air fi lter periodically. When the indicators or a message prompts you to clean the air fi lter, comply with it as soon as possible. Replace the fi lters when they are damaged or too soiled. To prepare the new fi lters, make contact with your dealer and tell the following type number. Type number : NJ27422 2 When you replace the lamp, please replace the air fi lter. An air fi lter of specifi ed type will come together with a replaceme
Краткое содержание страницы № 17
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. ® ® ® ® Windows : OS:Microsoft Windows 98, Windows 98SE, ® ® Windows NT 4.0, Windows Me, ® ® Windows 2000/Windows XP or later ® CPU:Pentium processor 133MHz / Memory:32MB or more ® ® Macintosh : OS:Mac OS 10
Краткое содержание страницы № 18
Specifi cations Item Specifi cation Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp 200 W UHB Speaker 1 W Power supply AC 100-120 V/2.9 A, AC 220-240 V/1.4 A Power consumption AC 100-120 V/290 W, AC 220-240 V/270 W Temperature range 5 ~ 35 °C (Operating) 306 (W) x 77 (H) x 221 (D) mm Size * Not including protruding parts. Please refer to the following fi gure. Weight (mass) approx. 2.1 kg Computer input port Video input port COMPUTER I
Краткое содержание страницы № 19
Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, fi rst refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. Please check the followi
Краткое содержание страницы № 20
DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www.dukane.com/av 403-8788-C-00 Concise
