Краткое содержание страницы № 1
Projector
Data Video Projector
CP-X2510Z/CP-X3010Z
User’s Manual (Concise)
MODELS 8755K, 8922H, 8923H
CP-X2011/CP-X2511/CP-X3011/CP-X3511
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
Information in this Guide may change due to product improvements. To obtain the latest
product. Be sure to read “Safety Guide” first. After reading them, store them in a
manuals, literature, and software ple
Краткое содержание страницы № 2
Projector C8755K, 8922H, 8923H User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product. See “Using the CD manual” ( 15) to read the manuals in the CD. After reading them, store them in a safe place for future reference. ►Heed all the warnings and cautions in the manuals or on the product. ►Fo
Краткое содержание страницы № 3
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage. NOTICE This entry notices of fear of causing trouble. Important safety instruction The followings are import
Краткое содержание страницы № 4
Regulatory notices About Electro-Magnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI / DUKANE Model Number C8755K, 8922H, 8923H C Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject t
Краткое содержание страницы № 5
Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb,
Краткое содержание страницы № 6
Preparations Loading batteries into the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. 1 2 3 Holding the hook part of the battery 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL, Part No.LR6 or R6P) according to their
Краткое содержание страницы № 7
Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. Do not place or attach anything that would block the lens or
Краткое содержание страницы № 8
Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. To input component video signal to COMPUTER IN1/2 port, please see the “Operating Guide” in the CD. Monitor PC RGB IN AUDIO OUT RGB OUT RS-232C AUDIO OUT RGB OUT USB Speakers L R L R L R Y CB/P
Краткое содержание страницы № 9
Connecting power supply Put the connector of the power cord into the 1. AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the 2. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT ON function activated, the connection of the power supply make the AC IN Power cord projector turn on. WARNING ►Please use extra caution when connecting the power cord, as incorrect
Краткое содержание страницы № 10
Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector 14° horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 14 degrees. This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is adjustable while pushing the elevator button on the same side as it. Holding the p
Краткое содержание страницы № 11
Displaying the picture Activate your signal source. Turn the signal 1. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA source on, and make it send the signal to ASPECT AUTO SEARCH BLANK the projector. PAGE VOLUME MAGNIFY FREEZE UP ON VOLUME+ button DOWN OFF Use the VOLUME + / VOLUME - buttons VOLUME- button 2. KEYSTONE MY BUTTON MUTE 1 2 to adjust the volume. MUTE button To have the projector silent, press the MUTE POSITION MENU ENTER button on the remote control. RESET ESC Press the INPUT bu
Краткое содержание страницы № 12
Turning off the power STANDBY/ON button Press the STANDBY/ON button on the POWER indicator 1. projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again 2. while the message appears. MY SOURCE/ The projector lamp will go off, and the VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP POWER indicator will begin blinking in ON DOWN OFF KEYSTONE MY BUTTON MUTE 1 2 orange. Then
Краткое содержание страницы № 13
Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : 4 456-8755J Turn the projector off, and unplug the power cord. 1. Lamp cov
Краткое содержание страницы № 14
Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, if the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury and
Краткое содержание страницы № 15
Cleaning and replacing the air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. To prepare the new filters, make contact with your dealer and tell the following type number. Type number : MU06481 (Filter set) Filter cover 2 When you replace the lamp, please replace the air fi
Краткое содержание страницы № 16
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. ® ® ® ® Windows : OS:Microsoft Windows 98, Windows 98SE, ® ® Windows NT 4.0, Windows Me, ® ® Windows 2000/Windows XP or later ® CPU:Pentium processor 133MHz / Memory:32MB or more ® ® Macintosh : OS:Mac OS
Краткое содержание страницы № 17
Specifications Item Specification Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) 8755K, 190 W UHP Lamp 8922H, 8923H, 210 W UHP Speaker 8 W x2 (monaural) 8755K, AC 100-120 V/2.9 A, AC 220-240 V/1.6 A Power supply 8922H, 8923H, AC 100-120 V/3.3 A, AC 220-240 V/1.7 A AC 8755K, AC 100-120 V/290 W, AC 220-240 V/270 W Power consumption 8922H, 8923H > AC 100-120 V/320 W, AC 220-240 V/300W AC 100-120 V/320 W, AC 220-240 V/300 W Temperature r
Краткое содержание страницы № 18
Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. Please check the followi
Краткое содержание страницы № 19
