Краткое содержание страницы № 1
Important Maintenance &
Setup & Connections Operation Useful Features Appendix
Information Troubleshooting
OPERATION MANUAL
MODEL
-
XG P10XU
LCD PROJECTOR
Краткое содержание страницы № 2
Before using the LCD projector, please read this operation manual carefully. OPERATION MANUAL ENGLISH IMPORTANT For your assistance in reporting the loss or theft of your - Model No.: XG P10XU Color LCD Projector, please record the Serial Number located on the bottom of the projector and retain this Serial No.: information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied Accessories” on page 10. There are tw
Краткое содержание страницы № 3
Important Information IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its installation, use and servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these “I
Краткое содержание страницы № 4
Outstanding Features X 1. ADVANCED COMPATIBILITY WITH HIGH-END WORKSTATIONS AND PCS L H Compatible with up to 200 Hz vertical refresh rate, Sync on Green and Composite Sync signals for use with a wide variety of high-end PCs and Workstations. (Page 11) 2. FOR USE WITH DTV Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems. (Page 13) 3. BNC TERMINALS FOR COMPONENT AND RGB INPUT Equipped with BNC terminals for connection to a DTV de
Краткое содержание страницы № 5
Important Maintenance & Setup & Connections Operation Useful Features Appendix Information Troubleshooting Contents Important Information Useful Features IMPORTANT SAFEGUARDS …………………… 2 Freeze Function …………………………………… 33 Outstanding Features …………………………… 3 Digital Image Magnification …………………… 34 Contents …………………………………………… 4 Gamma Correction ……………………………… 35 Usage Guidelines ………………………………… 5 Selecting the Picture Display Mode …………… 36 How to Access the PDF Operation Manuals Black Screen Function …………
Краткое содержание страницы № 6
Usage Guidelines "COMPLIES WITH 21 CFR SUBCHAPTER J" SHARP ELECTRONICS CORPORATION Cautions Concerning the Laser Pointer CAUTION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-BE-SHARP U.S.A. ONLY LASER RADIATION- REMOTE CONTROL DO NOT STARE INTO BEAM The laser pointer on the remote control emits a laser beam from the laser MODEL NO. : RRMCG1585CESA WAVE LENGTH : 650nm DC3V (1.5VX2PCS.) MAX. OUTPUT : 1mW MADE IN CHINA pointer window. This is a Class II laser which may impair your sight if dir
Краткое содержание страницы № 7
Important Information How to Access the PDF Operation Manuals (for Windows and Macintosh) PDF operation manuals in several languages are included in the CD-ROM. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it from the Internet (http://www.adobe.com) or install it from the CD-ROM. To Install Acrobat Reader from the CD-ROM For Windows: For Macintosh: 1 Insert the CD-ROM in the CD
Краткое содержание страницы № 8
Part Names Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector LAMP REPLACEMENT MUTE button 17 47 indicator TEMPERATURE WARNING POWER indicator 16 47 indicator POWER buttons (ON/OFF) 17 17 VOLUME buttons (/) LENS button 20 MENU button 23 INPUT button AUTO SYNC button 17 32 FREEZE button RESIZE button 33 36 GAMMA button ENLARGE button 34 35 BLACK SCREEN button UNDO button 37 20 ADJUSTMENT buttons ENTER button 23 23 (∂/ƒ/ß / ©) Cooling fa
Краткое содержание страницы № 9
Important Information Part Names Remote Control Front View Top View Remote control MUTE button 17 signal transmitter Laser VOLUME buttons POWER buttons pointer 5 17 17 (/) (ON/OFF) window 20 22 LENS/BLACK LASER POINTER/ SCREEN button MENU button 37 23 Rear View MOUSE/ 22 22 RIGHT-CLICK/ ADJUSTMENT ENTER button 23 23 buttons (∂/ƒ/ß/©) INPUT button UNDO button 17 20 FREEZE button AUTO SYNC button 33 32 LEFT-CLICK 22 ENLARGE button RESIZE button 34 36 button TOOLS button GAMMA button 43 35 MOUSE/
Краткое содержание страницы № 10
Setup & Connections E-9 Setup & Connections
Краткое содержание страницы № 11
Setup & Connections Supplied Accessories Remote control RRMCG1585CESA Power cord Two AA size batteries QACCU5013CEZZ Computer audio cable Computer RGB cable Three BNC-RCA adaptors QCNW-4870CEZZ QCNW-5304CEZZ QPLGJ0107GEZZ DIN-D-sub RS-232C cable Remote mouse receiver QCNW-5288CEZZ RUNTK0673CEZZ PS/2 mouse control cable USB mouse control cable QCNW-5113CEZZ QCNW-5680CEZZ Extra air filter Lens cap PFILD0088CEZZ PCAPH1056CESA CD-ROM LCD projector quick reference UDSKA0022CEN1 TINS-7053CEZZ LCD proj
Краткое содержание страницы № 12
Connecting the Projector Connecting the Power Cord Plug the supplied power cord into the AC socket on the back of the projector. Power cord QACCU5013CEZZ Connecting the Projector to a Computer You can connect your projector to a computer for projection of full color computer images. Connecting a computer using the standard 15-pin Input Computer RGB cable QCNW-5304CEZZ Computer audio cable QCNW-4870CEZZ 1 To use the Standard 15-pin connector, slide the 15 pin/ BNC switch on the rear terminals to
Краткое содержание страницы № 13
Setup & Connections Connecting the Projector • This projector uses a 5 BNC computer input to prevent deterioration of image quality. • Connect the R (PR), G/G sync (Y), B (PB), HD/C sync and VD cables to the correct input terminals on the projector and an RGB switcher (sold separately) connected to the computer, or connect a 5 BNC cable (sold separately) directly from the input terminals on the projector to the computer. Connecting to an external RGB switcher or other compatible computers using
Краткое содержание страницы № 14
Connecting the Projector Connecting the Projector to Video Equipment You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual equipment. CAUTION • Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment being connected. Connecting a VCR, laser disc player and other audiovisual equipment using the standard video Input 1 Connect the yellow RCA connectors to the corresponding yellow
Краткое содержание страницы № 15
Setup & Connections Connecting the Projector Connecting an amplifier and other audio components CAUTION • Always turn off the projector while connecting to audio components, in order to protect both the projector and the components being connected. • By using external audio components, the volume can be amplified for better sound. • The AUDIO OUTPUT terminal allows you to output audio to audio components from the selected AUDIO INPUT 1, 2 or 3 terminals connected to audiovisual equipment. 1 2 To
Краткое содержание страницы № 16
Connecting the Projector Connecting the Remote Mouse Receiver You can use the remote control as a remote mouse. Connecting to the USB port on a PC or Macintosh 1 Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer. 2 Connect the other end to the USB port on the remote mouse receiver. USB mouse control cable QCNW-5680CEZZ Remote mouse receiver RUNTK0673CEZZ Use the USB port (PC or Macintosh) to connect the supplied USB mouse control USB port cable
Краткое содержание страницы № 17
Operation Operation Basic Operations Make the necessary connections before proceeding. 1 Connect the power cord to a wall outlet. The POWER indicator lights up red and the projector enters standby mode. • If the bottom filter cover is not securely installed, the POWER indicator flashes. E-16
Краткое содержание страницы № 18
Basic Operations 4 Press Power ON. 2 • The flashing green LAMP REPLACEMENT 5 indicator shows that the lamp is warming up. Wait until the indicator stops flashing before 2, 6 operating the projector. • If the power is turned off and then immediately turned on again, it may take a short while before 3 the lamp turns on. • If the keylock level is set to “Level A” or “Level B”, Power ON and Power OFF can only be used on the remote control. (See page 41.) • After the projector is unpacked and turned
Краткое содержание страницы № 19
Operation Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the projector forward or backward if the edges of the image are distorted. • The projector lens should be centered in the middle of the screen. If the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult. • Position the screen so that it is not in direct sunlight or room light. Light falling directly ont
Краткое содержание страницы № 20
Setting up the Screen Using the Adjustment Feet 1 2 3 Press foot releases. Adjust height of projector Rotate feet to make minor and remove hands from foot changes. releases. • The projector is adjustable up to approximately 5° from the standard position. • When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. CAUTION • Do not press the foot releases when the adjustment feet are extended witho
