Краткое содержание страницы № 1
INSTRUCTION MANUAL
Rear Projection Color TV
C47-WD8000
C57-WD8000
Thank you for your purchasing HITACHI projection TV products.
In order to use the Rear Projection TV properly, please read this instruction manual
carefully before using it.
Краткое содержание страницы № 2
CONTENTS SAFETY TIPS····································································································································3 BEFORE USING THIS REAR PROJECTION TV ········································································7 Note·············································································································································7 Location ············································································
Краткое содержание страницы № 3
SAFETY TIPS In order to use this TV safely, you must pay attention to the notice shown below. This symbol indicates This symbol indicates This symbol indicates additional forbidden actions. required actions. cautions (including warning). Refer to the Power Supply as indicated on the rating label pasted at the back of the TV set. Do not use the TV outside the specified voltage range. It may cause a fire or an electric shock. Never insert or remove the power plug with wet hands. This m
Краткое содержание страницы № 4
SAFETY TIPS Do not place the TV near heat source (such as a radiator, stove etc.) or a place where sunlight shines directly on the screen. Overheating will cause failure of the TV. Do not place the TV in a dusty place or exposed to rain. Since accumulated dust inside the chassis may cause failure of the set when high humidity persists. Do not place containers filled with liquids or other objects, e.g. house plant, vase, tea sets, etc. In case liquids are spilled inside the T
Краткое содержание страницы № 5
SAFETY TIPS In order not to damage the parts in the set, please unplug and remove the outdoor antenna connection during lightning storms. When going out or your TV is set to remain unused for a long periods of time, please turn off the television and unplug it from the wall outlet. Accumulated dust on the plug or the humidity may cause a fire or electric shock due to reduced insulation on it. So when the TV won’t be used for a long period of time, be sure to remove the power plu
Краткое содержание страницы № 6
SAFETY TIPS Moisture Condensation If the room temperature suddenly rises or falls (e.g. the TV is moved from a cool place to a warm place), condensation may occur on the screen or lenses resulting in picture fading or color distortion. In such case, please wait a while for the condensation to evaporate. The sound and picture will be restored to normal. Precautions on stationary images This TV is designed to watch 16:9 (widescreen) picture. If you watch TV programs, please sele
Краткое содержание страницы № 7
BEFORE USING THIS REAR PROJECTION TV Note This is not an integrated digital TV. To watch digital broadcast programs (if available), you have to purchase a Digital Set-Top Box that will receive and decode digital broadcast signals and input to the TV via the component input terminals. Location Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. Also, be sure that the location selected allows a free flow of air to and from the perforated b
Краткое содержание страницы № 8
BEFORE USING THIS REAR PROJECTION TV Connect the power cord and the antenna Please read the rating label pasted at the back of the TV set carefully, and then insert the plug into the power outlet conformity to the rating label. Optimum reception requires that an outdoor aerial or CATV system must be used. Meanwhile, please note that a good antenna adaptor is necessary. See the following diagram. Precautions when connecting the antenna When you use an outdoor antenna instead of CATV system,
Краткое содержание страницы № 9
FUNCTIONAL PARTS Control panel and side panel POWER button P PC INPUT terminal C I N POWER indicator P U Remote control sensor T BRIDGE MEDIA status indicator HEADPHONE jack Side panel input jacks (For AV5 input) A U TV/VIDEO selector D I I O N P PROGRAM UP/DOWN VOLUME UP/DOWN U buttons (When the menu T buttons (When the menu 5 appears on the screen, press appears on the screen, PROG / PROG buttons press VOL / VOL to select the menu up and buttons to select the down.) menu
Краткое содержание страницы № 10
FUNCTIONAL PARTS Rear panel Audio/Video input terminals 3,4 Antenna terminal Audio/Video input & Component Monitor output input terminals 1,2 terminals TV AS CENTER input jacks Fixed/Variable Audio output HDMI terminals (High Definition Multimedia Interface) IR BLASTER output jacks Note: Before using these rear panel jacks, please refer to the INSTRUCTION MANUAL on page 62-65. 10
Краткое содержание страницы № 11
FUNCTIONAL PARTS On the remote control unit POWER button (Page 12) AV NET button (Page 45) TELETEXT buttons AV direct select buttons (AV1~AV5) BRIDGE MEDIA buttons MULTI PICTURE buttons (Page 38-41) (Page 33-35) Program selector buttons Program up button Page up button (In TELETEXT mode) Program down button (In CH SURF 12 mode) Page down button (In TELETEXT mode) (In CH SURF 12 mode) RETURN button (Page 13) MENU button (Page 13) See the remark. RECALL button CH SURF button (Page 36,
Краткое содержание страницы № 12
GETTING STARTED Power on/off TO TURN ON THE POWER Press the POWER button on the TV set. The power indicator will light up to indicate that the power is on. POWER button POWER indicator WHEN THE SET IS AT STANDBY The TV will be in standby mode and the blue power indicator becomes dimmer if the TV set is turned off using the button on the remote control unit. This indicates that the TV is not powered off completely and is in low power consumption mode, waiting for your new command a
Краткое содержание страницы № 13
GETTING STARTED Instructions for operating menu Before watching the TV, please familiarize yourself with this method to use the menu function of this TV. Instructions in this manual are based on using the remote control unit. The words or symbols with frames refer to the buttons on the remote control unit. The Chinese characters on the TV screen are supplied by Rico Company. The logos and symbols used in this instruction manual are intended for explanation purposes, they might differ f
Краткое содержание страницы № 14
GETTING STARTED Selecting the on-screen display language You can choose from two different languages (Chinese and English) for the on-screen displays. When necessary, you may change the displayed language following the procedures below. 1 Press the MENU button to display menu as shown on the right. 2 Press the cursor buttons to select the Setup option as shown on the right.
Краткое содержание страницы № 15
GETTING STARTED Easy Preset It becomes convenient for the customers to program the TV using the remote control unit and detailed OSD of the TV set. Please follow the procedures below to start tuning. 1 Press the MENU button to display menu. Press the cursor buttons to select the Setup option. 2 Press the ENTER button to enter the Setup menu. Press the cursor buttons to select the Easy Preset
Краткое содержание страницы № 16
ON-SCREEN DISPLAY MENU PICTURE MENU Picture Menu Picture menu allows you to adjust various picture settings such as brightness, color, contrast and sharpness. You can also adjust the settings for color temperature, dynamic contrast, etc. Please follow the steps below. 1 Press the MENU button to display menu. Press the cursor buttons to select the Picture option as shown on the right. 2 Press the ENTER button to
Краткое содержание страницы № 17
ON-SCREEN DISPLAY MENU PICTURE MENU 3 Press the cursor button until the second page in the Picture menu appears as shown on the right. These settings allow you to enhance or improve the visual condition of the picture. Notes: 1 If Noise Reduction is set to High or Low the Sharpness option cannot be adjusted. 2 While Film Mode is
Краткое содержание страницы № 18
ON-SCREEN DISPLAY MENU AUDIO MENU Audio Menu Audio menu allows you to adjust various sounds settings such as treble, bass, balance and headphone volume. You can also adjust the settings for surround effect, perfect volume, etc. Please follow the steps below. 1 Press the MENU button to display menu. Press the cursor buttons to select the Audio option as shown on the right. 2 Press the ENTER button to display
Краткое содержание страницы № 19
ON-SCREEN DISPLAY MENU TIMER MENU Timer Menu The Timer function for this TV uses a countdown timer system. It features On Timer, Off Timer and Auto Off. 1 Press the MENU button to display the menu. Press the cursor buttons to select the Timer option as shown on the right. 2 Press the ENTER button to enter the Timer menu as shown on the right.
Краткое содержание страницы № 20
ON-SCREEN DISPLAY MENU FUNCTION MENU Function Menu Function menu allows you to select scan mode, decorative light on the front panel and multi picture mode, etc. Please follow the steps below. 1 Press the MENU button to display the menu. Press the cursor buttons to select the Function option as shown on the right. 2 Press the ENTER button to enter
