Краткое содержание страницы № 1
®
Zebra TTP 7030™
Kiosk Receipt Printer
Technical Manual
P1003636-002
Краткое содержание страницы № 2
2 © 2009 ZIH Corp. The copyrights in this manual and the software and/or firmware in the TTP 7030 described therein are owned by ZIH Corp. and Zebra’s licensors. Unauthorized reproduction of this manual or the software and/or firmware in the TTP 7030 may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability. ® ® ™ 3™ This product may contain ZPL , ZPL II , and ZebraLink™ programs; Element Energy Equalizer Ci
Краткое содержание страницы № 3
Contents 1 • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 • Product Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 4
4 5 • Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 How The Commands Are Described . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Mnemonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Decima
Краткое содержание страницы № 5
5 8 • Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 USB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Serial Option, TTP 7030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
6 Notes • ___________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ _________________________________
Краткое содержание страницы № 7
1 Introduction About This Manual This manual contains the information required to install the TTP7030 printer and to run it from a host computer such as a PC. Programming on page 27 gives the applicable control codes and escape sequences supported by the printer processor firmware. Other chapters of the manual contain information about the printer error codes, communications-parameters, test print functions, specifications, replacement parts, etc. Updating This manual will be updated as, fro
Краткое содержание страницы № 8
About This Document 8 Contacts Contacts Technical Support via the Internet is available 24 hours per day, 365 days per year. Web Site: www.zebra.com E-mail Back Technical Library: E-mail address: emb@zebra.com Subject line: Emaillist Self Service Knowledge Base: www.zebra.com/knowledgebase Online Case Registration: www.zebra.com/techrequest Which Department Europe, Middle East, Asia Pacific The Americas Do You Need? and Africa and India Zebra Technologies Corporation Zebra Technol
Краткое содержание страницы № 9
2 Product Presentation The TTP 7030 kiosk printer uses direct thermal printing. The print speed is up to 75 mm per second. The printer has an integrated control board. The TTP 7030 communicates with the host computer through the USB interface and can be equipped with an optional serial port. Figure 1 • Printer Exterior, Rear View Paper entry Serial adapter (option) Indicators for 24 and 5V Roll holder paper level sensors IEEE-1284C Power USB J1 J10 J8 J13 SW 98051B Printer drivers for Micr
Краткое содержание страницы № 10
Product Presentation 10 Figure 2 • Printer Exterior, Side View Status indicator Print mechanism flip-back handle Feed-forward button Paper entry Paper release lever Printhead lifted Paper released Normal operation Paper exit FRONT Control board SW98049 P1003636-002 TTP 7030™ Technical Manual 10/05/2009
Краткое содержание страницы № 11
Product Presentation 11 Indicators Indicators Status Indicator The status indicator (see Figure 1, Printer Exterior, Rear View , on page 9) has several functions: ON constantly Indicates that the printer is operational. Flashes, pauses, flashes Indicates warnings of non-severe error. The number of flashes reflects the warning-code: • 2 flashes: Paper low Note • This signaling is disabled by default. It can be disabled/enabled by setting parameter P52. • 3 flashes: Weekend low Warning-codes ar
Краткое содержание страницы № 12
Product Presentation 12 Feed Button Feed Button The Feed button will feed, cut, and present a complete page. Any data in the print buffer will be printed. If the buffer is empty the page will be blank. In black mark mode, the page will be synchronized with the black mark. Press and hold the Feed button while turning on the power, or while opening and closing the printhead to print a self-test printout. See Making a test printout on page 14. P1003636-002 TTP 7030™ Technical Manual 10/05/2009
Краткое содержание страницы № 13
3 Installation 10/05/2009 TTP 7030™ Technical Manual P1003636-002
Краткое содержание страницы № 14
Installation 14 Installation Considerations Installation Considerations The TTP 7030 printer is designed to be installed in an enclosure such as a self-service kiosk. The illustration below gives an example of a printer-mounting shelf. See also Printer dimensions on page 110. 3D solid models and outline drawings for CAD are available in the partner section of www.zebra.com. Figure 3 • Example of a Simple Shelf for Fastening a Standard Printer Top view 4.2 (4x) 16.0 81 86.0 91 148.8 All measur
Краткое содержание страницы № 15
Installation 15 Installation Considerations Electrostatic Discharges, and Earth Currents Preventing ESD and earth currents from affecting the printer operation requires proper connection of the printer chassis to protective earth through a mounting platform or through a separate earth conductor. Ambient Light There is an optical sensor just inside the paper exit at the front of the printer. To ensure proper printer operation, design the printer enclosure so that it prevents direct sunlight o
Краткое содержание страницы № 16
Installation 16 Connecting To The Computer Connecting To The Computer Caution • Using a non-Zebra power supply may cause excessive EMC interferences and void the EMC certifications of the printer. Connect the TTP 7030 1. Connect J13 of the printer to the USB port of the computer or the USB hub to be used. USB connectors can be recognized by the following symbol: . Note • Connector J13 is a 4-pin USB type B connector. See USB, TTP 7030 on page 877 for pin assignment. Note • A suitable cable is
Краткое содержание страницы № 17
Installation 17 Connecting To The Computer Figure 5 • Fitting a serial adapter to the printer. 10/05/2009 TTP 7030™ Technical Manual P1003636-002
Краткое содержание страницы № 18
Installation 18 Connecting the Power Connecting the Power Using the Zebra power supply (see Ordering Numbers on page 127 for ordering number): 1. Make sure the line voltage selector on the power supply is set to your local line voltage (only PSU 01035-014). 2. Connect the cable from the power supply to J8. 3. Connect the power cable to the line outlet. 4. Apply power to the printer. If you use another type of power supply unit, connect the voltages as shown in Figure 6. Important • The protec
Краткое содержание страницы № 19
Installation 19 Making A Test Printout Making A Test Printout 1. Is a power button available for the printer? If… Then… Yes a. Remove power from the printer. b. Hold the feed-forward button depressed while powering ON the printer. c. Keep the button depressed until printing starts. This produces a printout showing the firmware program version and date, control board revision number and serial number, name of loaded fonts and logotypes, and the parameter settings. d. Each successive press of
Краткое содержание страницы № 20
Installation 20 Installing A Printer Driver Installing A Printer Driver Printer drivers for most versions of Microsoft Windows™, are available on the Zebra web site http://www.zebra.com. See Part Number List on page 115 for the part number. Please follow the installation instructions that accompany the drivers and refer to the Kiosk Driver Reference Guide, Part Number P1006873-001, available on www.zebra.com for detailed driver information. P1003636-002 TTP 7030™ Technical Manual 10/05/2009
