Краткое содержание страницы № 1
DIGITAL COLOR PRINTER
MODEL
CP900DW
OPERATION MANUAL
RESET
FEED&CUT COPY
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOR PRINTER.
This digital color printer complies with the requirements of the EC
Directive 89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that
gains proper operation in residential areas, on business and light
industrial premises and on small-scale enterprises, inside as wel
Краткое содержание страницы № 2
INFORMATION This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. MEDICAL EQUIPMENT WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH UL 2601-1 AND CAN/CSA C22.2 NO. 60601.1. 57RF According to Clause 5 in UL 2601-1 sec 6.8.1, this unit is classified by the following; 2 The type of protection against electric shock: EQUIPMENT energized from an external electrical power sour
Краткое содержание страницы № 3
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute the risk of electric shock. The exclamation point within an e
Краткое содержание страницы № 4
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING CONTENTS Contents ................................................................................................ 1 Safety precautions ................................................................................ 2-4 Special features .................................................................................... 5 Unpacking ............................................................................................. 6
Краткое содержание страницы № 5
SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This product is designed for operation on 120V AC or 220-240V AC 50/60Hz. Never connect to any outlet or power supply having a different voltage or frequency. WARNING: THIS APPARATUS MUST BE GROUNDED. AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE. PROTECTIVE MEASURES IF ABNORMALITIES ARISE, .... If the printer emits smoke or abnormal sounds, immediately unplug the power cord from the
Краткое содержание страницы № 6
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING BE CAREFUL WITH THE PRINTING MECHANISM Do not move the printer while the printing mechanism is open. This may cause injury. Be careful not to catch your fingers in the printing mechanism when sliding the mechanism back into the normal closed position. CONNECTING CABLES Use the power cord supplied with the printer. INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on the rear, sides and
Краткое содержание страницы № 7
SAFETY PRECAUTIONS CONNECTING DEVICES Read thoroughly the Safety Notices, Cautions and “Operating Precautions” of the instruction booklets for the other devices connected with the unit. CAUTION ON RELOCATING When transporting the unit, make sure it is not likely to be subjected to impacts. This can be a primary cause for damage. Before moving the unit, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices. SAFETY CHECKS Periods: According to the
Краткое содержание страницы № 8
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING SPECIAL FEATURES SPECIAL FEATURES 2 PRINT SIZES ARE AVAILABLE DEPENDING ON INK SHEET 2 printing sizes, L size (max.110 x 162 mm) and S size (max.110 x 105 mm), are selectable. HIGH SPEED PRINTING Printing speed is approx. 12 seconds (in S size print). LARGE CAPACITY PRINT MEDIA S size media has a maximum of 200 prints per roll. HIGH QUALITY PRINTING High quality print is available in dye sublimation mode. It also employs 256
Краткое содержание страницы № 9
COLOUR VIDEO COPY PROCESSOR COLOUR VIDEO COPY PROCESSOR UNPACKING UNPACKING Take the unit out of the box by the following procedures. Make sure to check the contents. 11 1 11 Open the top of the box. 22 2 22 Remove the cushion with contents. Be careful not to drop the contents. 3 3 3 Take the unit out of the box carefully. 3 3 Make sure to keep the unit horizontal. 44 4 44 Unwrap the packing. 2 2 2 CONTENTS 2 2 Make sure to check the supplied contents on the cushion. Power cords (2) Spacers (4)
Краткое содержание страницы № 10
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION SHOOTING FEATURES & FUNCTIONS FRONT PANEL 1 4 6 2 3 5 7 8 RESET FEED&CUT COPY C 9 A B 11 1 11 POWER BUTTON(INDICATOR) 88 8 88 COPY BUTTON Press to turn on power. Press again to turn off power. When pressing this button, the memorized data will be When the power is turned on, the indicator illuminates. printed. 2 2 2 ALARM INDICATOR 9 9 9 PRINT OUTLET 2 2 9 9 When this unit is overheated, this lamp flashes. When other The printed paper
Краткое содержание страницы № 11
FEATURES & FUNCTIONS REAR PANEL 1 2 4 3 8 7 6 5 4 3 2 1 OFF ON REMOTE USB 5 AC LINE 6 1 1 4 4 1 1 1 REMOTE TERMINAL 4 4 4 USB PORT Terminal connection for service remote only. Use this terminal to connect the unit to a device equipped This terminal is to be used by qualified service personnel with USB interface such as a personal computer. See page only. 9 for connection. 55 5 55 Potential equalization connector 2 2 2 2 2 MODE SWITCHES This is used to equalize the potential of the equipment Use
Краткое содержание страницы № 12
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING CONNECTIONS CONNECTION WITH USB INTERFACE 2 2 2 CONNECTING WITH PC 2 2 Connect this unit with a personal computer as following example. To USB port 8 7 6 5 4 3 2 1 OFF ON REMOTE USB AC LINE To USB port Personal computer Printer 9
Краткое содержание страницы № 13
CONNECTIONS SETTING MODE SWITCHES 2 2 2 SETTING MODE SWITCHES 2 2 8 7 6 5 4 3 2 1 Set the mode switches on the rear panel according to the equipment connected. All the switches are set to OFF as shown right when shipped from the factory. OFF Turn off the power when changing the mode switch settings. ON With the switch No.1 and No. 2, the printing speed can be set. Switch No. Print speed 1 2 OFF OFF Prints at the speed set by the printer driver ON ON OFF ON FINE mode print ON OFF FAST mode pr
Краткое содержание страницы № 14
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING BEFORE OPERATION Before printing, 1. Unlock the printing mechanism. (See below) 2. Install the print paper and ink cassette. (pages 11-15) PAPER SHEET SET Make sure to use the following types of paper sheet and ink sheet set. 2 2 2 2 2 PAPER SHEET SET Product name Ink sheet size No. of prints Usage CK900S S size 200 Colour print CK900L L size 130 Colour print CK900S4P S size 130 Surface-laminated colour print CK900L4P L size
Краткое содержание страницы № 15
BEFORE OPERATION 2 2 2 Set the other side of roller without gear. 2 2 1 Right side Left side 3 3 3 3 3 Remove the seal, and insert the edge of the print paper right below arrow marks the roller cover with arrow marks towards the front panel. Make sure to insert the paper straight. 44 4 44 Feed the print paper through the paper outlet. 55 5 55 Pull both sides of the print paper to eliminate slack. Paper Paper Paper 12
Краткое содержание страницы № 16
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING INSTALLATION OF INK SHEET White roller 22 2 22 INSTALLING THE INK SHEET Colored roller Load the ink sheet roll to the ink cassette before inserting the ink cassette into the printer. 11 1 11 Insert the ink sheet rollers gear into the holes of the ink cassette. Put the white roller (rolled with ink sheet) to the ink cassette first. Then, insert the colored roller (take-up) to the ink cassette. 22 2 22 Put the other sides of rol
Краткое содержание страницы № 17
BEFORE OPERATION 22 2 22 Insert the ink cassette with the ink sheet into its compartment. Put the ink cassette into the printer drawer as shown 1 . Then, set the other side 1 1 (with handle) as shown right. When exchanging the ink cassette, remove it by holding the handle. (See page 19.) 2 2 2 2 2 2 2 INSERT THE PRINTING UNIT 11 1 11 Push the printing unit until it is locked into place. 2 2 2 After plugging the power cord, press POWER button on the 2 2 front panel. 3 3 3 Press FEED & CUT butto
Краткое содержание страницы № 18
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING NOTE Take the print paper one by one after completing printing. Pull out the tray completely when using it. If you fail to do so, paper jamming may occur. Put the tray back after printing. USAGE AND STORAGE OF PAPER SHEET SET 2 BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2 images may be printed with a blank part due to
Краткое содержание страницы № 19
BEFORE OPERATION INSTALLING PRINTER DRIVER A printer driver is required to print the data from a personal computer connected with this unit. ® The printer driver for Windows is supplied with this unit. Product name Operating conditions ® ® ® CPD900W Applies for Microsoft Windows 98 and Windows Me ® ® ® CPD900N0 Applies for Microsoft Windows 2000 and Windows XP Refer to the “Read me” for installing the printer driver in the floppy disk supplied with this unit. 2 2 2 How to open the ReadMe file 2
Краткое содержание страницы № 20
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING TROUBLESHOOTING INDICATION ON THE FRONT PANEL & COUNTERNEASURES If for some reason printing is not possible or error occurs during printing, the indicators on the front panel will be lit. In this case, follow the procedure described below. : lit : blinks : not lit Causes Countermeasures ALARM SHEET PAPER DATA • Set a new roll of paper. Paper is used up. Refer to pages 11-13. Paper is not installed. • Replace the ink sheet with
