Краткое содержание страницы № 1
OPERATOR'S MANUAL
SCREWDRIVER/FLASHLIGHT
HP36KF
THANK YOU FOR BUYING A RYOBI SCREWDRIVER/FLASHLIGHT COMBINATION KIT.
Your new screwdriver/flashlight combination has been engineered and manufactured to Ryobi's high standard for
dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-
free performance.
CAUTION: Carefully read through this entire operator's manual before using your new screwdriver/flashlight
combination.
Pay close attenti
Краткое содержание страницы № 2
TABLE OF CONTENTS ■ Introduction ........................................................................................................................................................2 ■ General Safety Rules .....................................................................................................................................3-4 ■ Specific Safety Rules..................................................................................................................................
Краткое содержание страницы № 3
GENERAL SAFETY RULES ■ Remove adjusting keys or wrenches before turn- SAVE THESE INSTRUCTIONS ing the tool on. A wrench or a key that is left at- tached to a rotating part of the tool may result in WARNING: personal injury. Read and understand all instructions. Failure to ■ Do not overreach. Keep proper footing and bal- follow all instructions listed below, may result in ance at all times. Proper footing and balance en- electric shock, fire and/or serious personal injury. ables better control of
Краткое содержание страницы № 4
GENERAL SAFETY RULES ■ When servicing a tool, use only identical replace- SERVICE ment parts. Follow instructions in the Mainte- ■ Tool service must be performed only by quali- nance section of this manual. Use of unauthorized fied repair personnel. Service or maintenance per- parts or failure to follow Maintenance Instructions formed by unqualified personnel may result in a risk may create a risk of shock or injury. of injury. SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when
Краткое содержание страницы № 5
SPECIFIC SAFETY RULES ■ Do not operate charger if it has received a sharp CHARGER SAFETY INSTRUCTIONS blow, been dropped, or otherwise damaged in ■ Save these instructions. This manual contains any way; take it to a qualified serviceman. Follow- important safety and operating instructions for ing this rule will reduce the risk of electric shock, fire, charger. Following this rule will reduce the risk of or serious personal injury. electric shock, fire, or serious personal injury. ■ Do not disass
Краткое содержание страницы № 6
SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type or a characteristic of current --- Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load 0 Class
Краткое содержание страницы № 7
SPECIFICATIONS Motor (Screwdriver) 3.6 Volts DC Collet (Screwdriver) 1/4 in. (6.4 mm) No Load Speed (Screwdriver) 180 RPM Switch (Screwdriver) Reversible Maximum Torque (Screwdriver) 45 in. lbs. Charger Rating 120 Volts, 60 Hz, AC only Charge Time 10 hours UNPACKING INSTRUCTIONS PACKING LIST Your screwdriver/flashlight combination has been Screwdriver shipped completely assembled. Flashlight ■ Carefully remove the screwdriver, flashlight, and Bits (23-piece set) accessories from the box. Make su
Краткое содержание страницы № 8
FEATURES SWITCH TORQUE ADJUSTMENT Your flashlight has a conveniently located trigger switch. You can easily adjust the torque of the screwdriver. The maximum torque is 45 lbs./in. ANGLE ADJUSTMENT ERGONOMIC DESIGN Your screwdriver and flashlight are both equipped with an angle adjustment feature that allows you to adjust the The design of your screwdriver and flashlight provides angle of the tools. easy handling. They have been designed to be comfortable and easy to grasp when operating in diffe
Краткое содержание страницы № 9
ADJUSTMENTS WARNING: Your screwdriver/flashlight combination should never be connected to power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when not in use. Disconnecting your tools will prevent accidental starting that could cause serious injury. INSERTING/REMOVING BITS See Figure 2. Follow these directions when inserting and removing bits. COLLET ■ To insert bit: Insert shank end of bit into collet. ■ To remove bit: Remove bit when finished an
Краткое содержание страницы № 10
OPERATION MOUNTING CRADLE/CHARGER See Figure 5. Follow these directions when mounting the cradle/ charger. ■ Locate a convenient electrical outlet. NOTE: Temporarily place the tools in the cradle/charger to make sure they will not interfere with surrounding objects. ■ Place cradle/charger in the desired location. ■ Mark holes with pencil. ■ Remove cradle/charger. ■ Drill four pilot holes. ■ Position cradle/charger, aligning holes in cradle/ Fig. 5 charger with pilot holes. ■ Secure cradle/charge
Краткое содержание страницы № 11
MAINTENANCE WARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL REPLACING BULB See Figure 9. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of When purchasing a replacement bulb, request part commercial solvents and may be damaged by their use. number 7803001. Use clean cloths to remove dirt, carbon dust, etc. Follow these directions when rep
Краткое содержание страницы № 12
OPERATOR'S MANUAL SCREWDRIVER/FLASHLIGHT HP36KF • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our Web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. The model number
