Краткое содержание страницы № 1
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 1
Owner’s Manual
SMART700DV
Intelligent, Line-Interactive UPS System
• 120V/230V Auto-Sensing Input, 120V Output
Not suitable for mobile applications.
Important Safety Instructions 2
Quick Installation
3
Optional Installation
4
Basic Operation 5
Storage and Service 8
Battery Replacement 9
Specifications 10
Warranty Registration 10
1111 W. 35th Street, Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Copyright
Краткое содержание страницы № 2
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 2 Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty. UPS Location Warnings • The UPS is heavy. Use caution when lifting it. � Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. � For best performa
Краткое содержание страницы № 3
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 3 Quick Installation 1 Plug the UPS into a wall outlet supplying either 120V or 230V (nominal) AC power. Use the included detachable power cord. The IEC-320 end connects to the AC input receptacle on the rear of the UPS; the NEMA 5-15 end connects to the wall outlet. 1 To plug the UPS into a wall outlet that does not accept a NEMA 5-15 plug, simply replace the included power cord with a detachable cord from another piece of equipment,
Краткое содержание страницы № 4
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 4 Optional Installation These connections are optional. Your UPS will function properly without these connections. USB and RS-232 Serial 1 Communications 1a Use the included USB cable (see ) and/or DB9 serial 1b cable (see ) to connect the communication port on your equipment to the communication port of your UPS. Install on your equipment the Tripp Lite 1a PowerAlert Software appropriate to your equipment’s operating system. Consult
Краткое содержание страницы № 5
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 5 Basic Operation Buttons (Front Panel) “ON/OFF/STANDBY” Button � To turn the UPS ON: with the UPS plugged into a live AC wall outlet*, press and hold the “ON/OFF/STANDBY” button for one second.** Release the but- ton. If utility power is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply power for a limited time from its batteries***) by pressing and holding the “ON/OFF/STANDBY” button for one second.** � To turn the U
Краткое содержание страницы № 6
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 6 Basic Operation continued Indicator Lights (Front Panel) All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned ON. “POWER” LED: this green LED lights continuously when the UPS is ON and supplying connected equipment with AC power from a utility source. The LED flashes and an alarm sounds (4 short beeps followed by a pause) to indicate the UPS is operating from its internal batteries during a bl
Краткое содержание страницы № 7
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 7 Basic Operation continued Other UPS Features (Rear Panel) AC Receptacles: Your UPS features 15-amp AC outlets. These output recep- tacles, provide your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment connected to these receptacles against damaging surges and line noise. If you have a serial or USB connection to your UPS, you can remotely reb
Краткое содержание страницы № 8
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 8 Storage and Service Storage Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power, press and hold the "ON/OFF/STANDBY" button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extended period of time, recharge the UPS batteries once every three months: plug the UPS into a wall outlet; allow it
Краткое содержание страницы № 9
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 9 Battery Replacement Under normal conditions, the original batteries in your UPS will last many years. See Safety section before replacing batteries. The batteries are designed for hot-swap replacement (i.e. leaving the UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode and disconnect equipment before proceeding. Procedure 1 Remove Front Panel 2 Disconnect Batteries 3 Remove/Dispose of Batt
Краткое содержание страницы № 10
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 10 Specifications Model: SMART700DV Input Voltage: 120V or 230V AC (nominal), auto-sensing Input Frequency: 50 or 60 Hz., auto-sensing Input Receptacle: IEC-320-C14 (Accepts detachable power cords. Included cord features NEMA 5-15 plug.) Output Voltage: 120V AC Output Frequency: 50 or 60 Hz. Output Capacity (VA): 700 Output Capacity (Watts): 450 Output Receptacles: 6 NEMA 5-15R Communications Ports: 1 USB, 1 RS-232 Emergency Power Of
Краткое содержание страницы № 11
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 11 11
Краткое содержание страницы № 12
200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 12 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 � www.tripplite.com 200511135 93-2513
