Краткое содержание страницы № 1
www.mgeups.com MGE UPS SYSTEMS
Pulsar Evolution
2200/3000/3000 XL
Installation and user
manual
34007115EN/AA - Page 1
W
O
N
U
O
Y
P
O
T
S
L
L
I
W
G
N
I
H
T
O
N
Краткое содержание страницы № 2
Page 2 - 34007115EN/AA
Краткое содержание страницы № 3
Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The Pulsar Evolution range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your UPS. MGE UPS SYSTEMS pays great attention to the environmental impact of its products. Measures that have made Pulsar Evolution a reference in environmental protection include: w the eco-design approach used in product deve
Краткое содержание страницы № 4
Foreword Using this document Information may be found in two ways, using: w the contents; w the index. Pictograms Important instructions that must always be followed. Information, advice, help. Visual indication. Action. Audio indication. In the illustrations on the following pages, the symbols below are used: LED off. LED on. LED flashing. Page 4 - 34007115EN/AA
Краткое содержание страницы № 5
Contents 1. Presentation 1.1 Overall view ................................................................................................................................. 7 Tower position ................................................................................................................................. 7 Rack position .................................................................................................................................. 7 1.2 Back ......................
Краткое содержание страницы № 6
Contents 6. Appendices 6.1 Technical data ............................................................................................................................. 24 Simplified diagram ........................................................................................................................ 24 Technical characteristics ............................................................................................................... 25 Examples of battery backup times ............
Краткое содержание страницы № 7
1. Presentation 1.1 Overall view Tower position Dimensions in mm (W x H x D) Evolution 2200 438 x 87.9 x 640 Evolution 3000 (19") (2U) Evolution 3000 XL Weight in kg Evolution 2200 34 Evolution 3000 37 Evolution 3000 XL 21 Rack position D H W 34007115EN/AA - Page 7 P U L S A R Evolution 3 0 0 0 P U L S A R Evolution 3 0 0 0
Краткое содержание страницы № 8
1. Presentation 1.2 Back Pulsar Evolution 2200 USB communications port. 1 RS232 DATA LINE PROTECTION 2 RS232 communications port. IN OUT TO BATTERY CABINET 3 1 2 Connector for automatic detection of an 1 2 additional battery module. 4 Data-line protection. 1 23 4 5 6 8 9 10 11 5 Slot for communications-card option. 6 Connector for an additional battery module. Pulsar Evolution 3000 / 3000 XL 7 AB Output circuit breakers. AB RS232 8 DATA LINE PROTECTION Four outlets for direct
Краткое содержание страницы № 9
1. Presentation 1.3 Control panel 15 Iluminated ON/OFF button for the outlets. 16 Operation on battery power. 17 UPS fault. Battery fault. 18 Overload. 19 Group 1 programmable outlets supplied with power. 1 2 20 Group 2 programmable outlets supplied with power. 21 Booster or fader mode. 22 Bargraph indicating percent load at output. % % 23 Bargraph indicating the battery charge level. 76 to 100%. 51 to 75%. 26 to 50%. 0 to 25%. 34007115EN/AA - Page 9
Краткое содержание страницы № 10
2. Installation 2.1 Unpacking and parts check 26 24 25 27 28 29 30 31 32 Cord for connection to the AC-power source for 3000/3000 XL versions only (for the 2200 version, use the power cord 24 of the protected equipment). 25 Two cords for connection of the protected equipment. RS232 communications cable. 26 USB communications cable. 27 Telescopic rails for mounting in 19" bay with mounting hardware. 28 Two securing systems for equipment power cords
Краткое содержание страницы № 11
2. Installation 2.2 Upright installation (tower position) Connect the two supports for the upright position. 34007115EN/AA - Page 11 P U L S A R Evolution 3 0 0 0 P U L S A R Evolution 3 0 0 0
Краткое содержание страницы № 12
2. Installation 2.3 Flat installation (rack position) Follow steps 1 to 6 for rack mounting of the UPS on the rails. 2 1 6 2 2 4 3 2 5 6 5 3 The rails and the necessary mounting hardware are supplied by MGE UPS SYSTEMS. Page 12 - 34007115EN/AA P U L S A R Evolution 3 0 0 0
Краткое содержание страницы № 13
1 2 2. Installation 2.4 Connecting the protected equipment Check that the indications on the rating plate on the back of the UPS correspond to your AC-power system and to the actual electrical consumption of all the equipment to be connected to the UPS. 1 - Remove the power cord supplying the equipment to be protected. 2 - Pulsar Evolution 2200: Connect the (1) power cord just removed from the equipment to the AC-power socket 11 and then to the AC-power wall outlet. 9 - Pulsar Evolution 3000/
Краткое содержание страницы № 14
RS232 RS232 DATA LINE PROTECTION DATA LINE PROTECTION IN OUT IN OUT TO BATTERY TO BATTERY CABINET CABINET 2. Installation 2.5 Connection to the RS232 or USB communications port (optional) The RS232 and USB communications ports cannot operate simultaneously. 26 1 - Connect the RS232 26 or USB 27 communications cable to the serial port or the USB port on the computer. 27 2 - Connect the other end of the communications cable 26 or 27 to the RS232 2 or USB 1 commun
Краткое содержание страницы № 15
RS232 DATA LINE PROTECTION IN OUT TO BATTERY CABINET 2. Installation 2.7 Installation of the communications-card option 1 - Remove the slot cover 5 secured by two screws. 2 - Insert the card in the slot. 5 3 - Secure the cover with the two screws. Slot for the communications-card option. It is not necessary to shut down the UPS to install the communications card. 34007115EN/AA - Page 15
Краткое содержание страницы № 16
3. Operation 3.1 Start-up Press the ON / OFF button 15 . The buzzer beeps and all the LEDs come ON. The buzzer beeps twice during the self-test, then button 15 remains 15 ON, indicating that the outlets are supplied with power. - AC power is present: Only button 15 is ON. The protected 16 equipment is supplied by the AC-power source. 17 - AC power is absent: Button 15 and LED 16 are ON. The protected 1 2 equipment is supplied by the UPS, operating on battery power. % % All the connected
Краткое содержание страницы № 17
3. Operation 3.3 Operation on battery power (following failure of AC-input power) Transfer to battery power The AC-input power is out of tolerances, LED 16 goes ON. During operation on battery power, the buzzer beeps every ten seconds. The equipment connected to the UPS is supplied by the battery. 16 1 2 % % Threshold for the low-battery warning When the threshold is reached, the buzzer beeps every three seconds. The low-battery warning threshold can be set by the user, with the ÒUPS DriverÓ
Краткое содержание страницы № 18
3. Operation 3.4 Personalisation (optional) Function Personalisation parameters can be set and modified using the UPS Driver software installed on a computer that is connected to the UPS (see section 2.5 Connection to the RS232 communications port). Check that the RS232 26 communications cable is connected. UPS Driver installation: 1 - Insert the Solution-Pac CD-ROM containing the UPS Driver software in the drive of a PC running Windows. 2 - Open the Windows File manager or Explorer and select
Краткое содержание страницы № 19
3. Operation Voltage-thresholds tab Configurable function Default setting Options Output voltage on battery power 230 V 200 V - 220 V - 240 V Upper threshold for transfer to battery power 294 V 271 to 294 V Fader-mode cut-in threshold 265 V 244 to 265 V Booster-mode cut-in threshold 184 V 184 to 207 V Lower threshold for transfer to battery power 160 V 160 to 180 V (1) Maximum input-voltage range Disabled Enabled (1) Lower threshold for transfer to battery power = 150 V Sensitivity tab Configur
Краткое содержание страницы № 20
4. Maintenance 4.1 Trouble-shooting Troubleshooting not requiring MGE UPS SYSTEMS after-sales support (all versions) Indication Signification Correction LED 18 flashes and the UPS overload. The power drawn by the connected Check the power drawn by the buzzer beeps once. equipment exceeds UPS capacity. equipment and disconnect any non- priority devices. LED 17 flashes. A battery fault was detected during the automatic Replace the battery module (see battery test. section 4.2). Troubleshooting
