Краткое содержание страницы № 1
QLIGHT SERIES
TQ-440SP
USER MANUAL
Turbosound Ltd.
Star Road, Partridge Green
West Sussex RH13 8RY England
Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155
web: www.turbosound.com
Issue 1.0 Copyright 2000 Turbosound Ltd.
Краткое содержание страницы № 2
user manual QLight series 08/06/2001 3:35 PMCONTENTS Safety Information ............................................................................................................................ 3 Thanks................................................................................................................................................ 4 Unpacking................................................................................................................................
Краткое содержание страницы № 3
user manual QLight series An example of this equipment has been tested and found to comply with the following European and international Standards for Electromagnetic Compatibility and Electrical Safety: Radiated Emissions (EU): EN55013-1 (1996) RF Immunity (EU): EN55103-2 (1996) RF Immunity, ESD, Burst Transient, Surge, Dips & Dwels Electrical Safety (EU): EN60065 (1998) rd Electrical Safety (USA): UL6500 3 edition (1997) Samples of this product have been tested and were foun
Краткое содержание страницы № 4
user manual QLight series Important Safety Information Please read carefully and keep the following instructions and safety information. Heed all warnings and follow all instructions. • Do not remove covers. There are no user serviceable parts inside, please refer servicing to qualified service personnel. This equipment must be earthed. • Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions. • Clean only with a damp cloth. • Do not de
Краткое содержание страницы № 5
user manual QLight series Unpacking the TQ-440SP loudspeaker After unpacking the unit please check carefully for damage. If damage is found, please notify the carrier concerned at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future re-shipment. TQ-440SP manual page 5
Краткое содержание страницы № 6
user manual QLight series Introduction Congratulations, you have just purchased a professional loudspeaker system from the renowned Turbosound range, designed to give you the best in audio quality and many years of reliable, trouble free operation. It offers superior audio quality, unsurpassed vocal projection, full technical documentation including EASE data, and comprehensive rigging and flying hardware options. Please read through this manual carefully before you attempt to operate
Краткое содержание страницы № 7
user manual QLight series Product Summary The TQ-440SP is a compact three-way self-powered full range enclosure including integral power amplifiers and control electronics. The use of active power amplifier technology ensures an exact match between amplifier and speaker for optimum acoustic output, and offers exceptional ease of use by combining the entire electro-acoustic system in one convenient, easily transportable physical package. It incorporates a custom-designed co-axial 12"/
Краткое содержание страницы № 8
user manual QLight series Connector Panel Functions 1. S S S Siiiig g g gn n n na a a al lin ll lin l lin link k k k – lockable 3-pin XLR line output socket links to additional cabinets. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected. 2. Si Si Si Signal gnal gnal gnal i i i input nput nput nput – locking 3-pin XLR line input socket connects to audio mixer. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 screen (shield). 3. P Pr Pr Pr rot o ot ot tect e ect ect ct – R
Краткое содержание страницы № 9
user manual QLight series System Requirements The TQ-440SP is a self-powered loudspeaker system. It comprises two independent amplifier channels: one channel to power the low frequency driver (LF) plus another channel to power the midrange (MF) and high frequency (HF) together; and a frequency dividing network to split the signal and feed it to the appropriate driver section. Additional features such as accurate and optimised peak limiters for both high and low frequency sections are
Краткое содержание страницы № 10
user manual QLight series Audio Input The signal input to the TQ-440SP is fully balanced, with an input impedance of 10kΩ . The input XLR connector is wired pin 2 hot (+ve), pin 3 cold (-ve), and pin 1 screen (shield). The link XLR connector is wired pin 2 hot (+ve), pin 3 cold (-ve), and pin 1 not connected. Multiple TQ-440SP enclosures may be driven from a single audio console, up to a practical limit of 16 units. Any more will cause unacceptable signal loss due to the loading of th
Краткое содержание страницы № 11
user manual QLight series Equalisation Because the TQ-440SP features a smooth and even frequency response, it does not need equalisation or correction to overcome the deficiencies often found in lesser designs. Should extended frequency response be required at more than medium sound pressure levels, the use of the complementary TQ-425SP self-powered subwoofer is strongly recommended In order to compensate for the room acoustics, the TQ-440SP requires only minimal equalisation. As in
Краткое содержание страницы № 12
user manual QLight series Mounting and Fixing A versatile range of mounting hardware is available for the TQ-440SP that allows it to be used in a variety of ways, in either mobile applications or permanent installations. A t A A t A t top hat o op hat op hat p hat st st st sta and t and t and t nd ty y y yp pe f pe f pe f e fiiiit t t tt t t tiiiin ng ng ng g is mounted in the base of the cabinet for use with 35mm diameter loudspeaker stands with a load rating of at least 37kgs (82lb
Краткое содержание страницы № 13
user manual QLight series The uni The uni The uni The univer ver ver versal sal sal sal FB FB FB FB- - - -12 12 f 12 f 12 f fllllybar ybar ybar ybar assem assem assem assemb b b blllly y y y enables the use of several different fixing methods, shown in the diagram here. The flybar is attached to to the cabinet using a pair of captive M10 shoulder eyebolts (supplied). There are 12 attachment points equally spaced along the length of the spine. Depending on which point is chosen for th
Краткое содержание страницы № 14
user manual QLight series positioning of the loudspeaker. The point at which the scaffold clamp is attached to the flybar determines the vertical angle of the loudspeaker as shown in the table following. The following table gives the predicted downward angle of the enclosure using the various attachment points on the FB-12 flybar assembly. Attachment position Vertical angle (negative angle denotes upwards) -29° Hole number 1 (front of cabinet) -23° Hole number 2 -17° Hole number
Краткое содержание страницы № 15
user manual QLight series Modul Modul Modul Modular ar ar ar f f f fllllybar ybar ybar ybar assembl assembl assembl assembly y y y The key element in flying multiple TQ-440SP enclosures is a versatile Flying Bar Assembly (FB-58), manufactured by Turbosound, that will support a vertical column of up to three enclosures deep. Fly bars can be linked in the horizontal plane using the index pins provided to form arched arrays with adjustable (horizontal) angles from 0º to 45º at 5º in
Краткое содержание страницы № 16
user manual QLight series Arraying The TQ-440SP has a side-wall angle of 16º. Use this position for smooth horizontal dispersion that is ideal for many applications. With the high dynamic range capability and low power compression of the TQ-440SP you should find this wide angle arrangement adequate for all but the most demanding long throw requirements. It also has the advantage of needing fewer cabinets to cover the required area. When speakers are mounted together in close proximit
Краткое содержание страницы № 17
user manual QLight series Choosing the best location It was stated earlier that the TQ-440SP’s tightly controlled directivity gives it essentially point and shoot qualities. Every room has its own unique set of characteristics that affect any sound introduced into the room. These include reverberation reflections and decay time, sound absorption of materials used, temperature and humidity, etc. A degree of experimentation with different locations (if possible) is best, especially if y
Краткое содержание страницы № 18
user manual QLight series Maintenance Should a fault develop with the amplifier module, we recommend that you remove the module as described below and return it to a qualified Turbosound service centre for repair. The module contains no user-serviceable parts, and the warranty will be invalidated if unauthorised repairs are carried out. If one of the drive units in the cabinet should cease functioning and needs a replacement recone or diaphragm you are advised to remove the faulty un
Краткое содержание страницы № 19
user manual QLight series Removal of the midrange drive unit If the midrange drive unit requires maintenance, it will first be necessary to remove the amplifier module. The midrange driver is held in place by a M10 x 25mm bolt through the rear of the cabinet into the back plate of the drive unit underneath the amplifier module. Once this is released the midrange horn and drive unit assembly can be removed. 1. Remove the amplifier module as described above and set it aside. 2. The M10
Краткое содержание страницы № 20
user manual QLight series APPENDIX A Technical Specifications Dimensions 558mm x 409mm x 363mm (23.1” x 16.1” x 14.3”) Net weight 37.5kgs (82.5lbs) Components 12”/1” LF/HF co-axial driver, 6.5” MF driver on a TurboMid device Frequency response 55Hz – 20kHz ±4dB Nominal dispersion 60°H x 40°V @-6dB points Maximum SPL 128dB continuous, 134dB peak Construction 15mm (5/8”) birch plywood throughout; rebated, screwed and glued. Finished in black semi-matt textured paint. Two recess
