Краткое содержание страницы № 1
OWNER’S MANUAL
Краткое содержание страницы № 2
CONTENTS INTRODUCTION 3 SATELLITE What’s in the box? 4 How to wall mount 5 STAND MOUNT What's in the box? 8 How to stand mount 9 CENTRE CHANNEL What’s in the box? 10 How to wall mount 11 TOWER What’s in the box? 13 How to connect 14 ROOM SET UP 15 CONNECT TO RECEIVER 16 SPECIFICATIONS 17 WARRANTY This equipment has been produced and tested with care and precision. All Tannoy speaker systems are built to give first class service and carry a 5-year warranty. Active subwoofers carry a 1-year warra
Краткое содержание страницы № 3
INTRODUCTION Thank you for selecting Tannoy loudspeakers developed in the UK by our dedicated team of design engineers. The Tannoy Arena Highline 500™ speakers are designed to blend perfectly into your room and provide a sound stage which is at least as good as you would hear in a commercial movie theatre, but in the comfort of your own home. You have a choice of speakers, mounting brackets and floor-stands to help you to get the very best sound quality and appearance. Tannoy Professional Stu
Краткое содержание страницы № 4
SATELLITE What’s in the box? 1 x Satellite speaker 1 x Long wall bracket 1 x Short bracket with pre-fitted cap 1 x Short bracket without pre-fitted cap 1 x Bracket cap 4 x 8mm Silver hex socket fixing screw + lock washers 1 x 5mm black cap head fixing screw + spring washer 1 x Ball nosed Allen key Required but not included: Sufficient cable for your requirements Countersunk fixing screws suitable for your wall type Screwdriver for above fixing screws Spirit level 4
Краткое содержание страницы № 5
SATELLITE How to wall mount WARNING: It is your responsibility to ensure that the bracket to wall fixing screws or bolts and the walls themselves are strong enough to support the weight of the speaker – refer to the speaker weight specifications supplied in this manual. Particular care is needed when fixing to hollow or cavity walls - ‘'stud’' walls. Use only professionally recommended fixing devices which will spread the load of the brackets and fixing screws over an area of the wall surface wh
Краткое содержание страницы № 6
SATELLITE How to wall mount - continued Cut the speaker wire so that the (+) side is slightly longer than the (-) side and feed the speaker wire through spare bracket cap. Important Note: It is essential that the speakers are wired correctly at this stage. The (-) wire should have a solid black line, or similar, marked along it. Screw (+) wire into red terminal and screw (-) wire into black terminal. Offer speaker up to wall bracket half way above it, engage speaker and slide down Ensure cap is
Краткое содержание страницы № 7
SATELLITE How to wall mount - continued Fix spare cap to bottom of bracket using cap screw and spring washer provided 7
Краткое содержание страницы № 8
STAND MOUNT What’s in the box? 1 x Stand mount 2 x Lock washers 2 x Fixing screws 6 x Spikes 6 x Rubber feet 6 x M6 nuts 8
Краткое содержание страницы № 9
STAND MOUNT How to stand mount Attach the spike kits, or rubber feet, to the bottom of the stand then thread the cable through the stand base and shaft. Cut the speaker wire so that the (+) wire is slightly longer than the (-) wire. Screw the (+) wire into the red terminal and screw (-) wire into black terminal. Important Note: It is essential that the speakers are wired correctly at this stage. The (-) wire should have a solid black line or similar marked along it. Offer the speaker up to the s
Краткое содержание страницы № 10
CENTRE CHANNEL What’s in the box? 1 x Centre speaker 1 x Long wall bracket 1 x Short bracket with pre-fitted cap 1 x Short bracket without pre-fitted cap 1 x Bracket cap 4 x 8mm Silver hex socket fixing screw + lock washers 1 x 5mm Black cap head fixing screw + spring washer 1 x Ball nosed allen key 1 x Small stand Required but not included: Sufficient cable for your requirements Countersunk fixing screws suitable for your wall type Screwdriver for above fixing screws Spirit level 10
Краткое содержание страницы № 11
CENTRE CHANNEL How to wall mount WARNING: It is your responsibility to ensure that the bracket to wall fixing screws or bolts and the walls themselves are strong enough to support the weight of the speaker - refer to the speaker weight specifications supplied in this manual. Particular care is needed when fixing to hollow or cavity walls - ‘'stud’' walls. Use only professionally recommended fixing devices which will spread the load of the brackets and fixing screws over an area of the wall surfa
Краткое содержание страницы № 12
CENTRE CHANNEL How to wall mount - continued Offer the speaker up to the wall bracket half way along. Engage speaker with bracket and slide across. Ensure cap is fully engaged with the wall bracket. Fix spare cap to bottom of bracket using the cap screw and spring washer provided. 12
Краткое содержание страницы № 13
TOWER What’s in the box? 1 x Tower speaker 6 x Spikes 6 x Rubber Feet 6 x M6 Nuts Required but not included: Sufficient cable for your requirements 13
Краткое содержание страницы № 14
TOWER How to connect Attach the spike kits or rubber feet to the base of the tower then thread the speaker cable through the base. Cut the speaker wire so that the (+) wire is slightly longer than the (-). Screw the (+) wire into the red terminal and screw (-) wire into the black terminal. Important Note : It is essential that the speakers are wired correctly stage. The (-) wire should have a solid black line marked along it. 14
Краткое содержание страницы № 15
ROOM SETUP A 5.1 surround sound system consists of 5 separate speakers and 1 subwoofer. The centre channel is designed to reproduce most of the dialogue or solo performances. The front left and right speakers reproduce the left/right stereo information and special effects. The rear left and right speakers reproduce special effects. Try to get all 3 front speakers equidistant from the listening position and in the same plane, for example along a back wall which may be present just behind the view
Краткое содержание страницы № 16
CONNECTING THE SYSTEM TO YOUR AV RECEIVER Wire up the system connecting each speaker to the appropriate terminals on the receiver or amplifier making sure that cables connect red to red terminals (+ to +) and black to black terminals (- to - ). Please note : (+) is shown as grey, (-) is shown as white. Take care to distinguish between left and right channels and the front and rear channels, as seen from the viewing position. This is a very important stage in setting up. Getting things wrong at t
Краткое содержание страницы № 17
TECHNICAL SPECIFICATIONS ARENA HIGHLINE 500, CENTRE & SATELLITE SPEAKER PERFORMANCE: Recommended amplifier power 25 - 100W RMS Maximum sensitivity (2.83V @ 1m) 88dB Nominal impedance 8 Ohm Frequency response (-6dB) 85Hz- 54kHz TM Drivers 1 x 100mm (4”) Dual Concentric with 19mm (0.75”) HF 1 x 100mm (4”) LF Crossover frequency 1.75kHz Magnetic shielding Yes Satellite weight 6.5 kg (14.3 lbs) Satellite dimensions H x W x D 593 x 149 x 124 mm (23.34 x 5.87 x 4.88 ins) Centre weight 6.5 kg (14.3 lbs
Краткое содержание страницы № 18
TECHNICAL SPECIFICATIONS ARENA HIGHLINE 500 SATELLITE ACCESSORY STAND Weight 5.9kg (13lbs) Dimensions H x W x D 760 x 209 x 197mm (29.90 x 8.23 x 7.76 ins) Finish Black gloss or silver gloss 999.5 - 1199.5mm (39.35” - 47.22”) 759.5 (29.90”) 209.0mm (8.23”) 197.0mm (7.76”) 18
Краткое содержание страницы № 19
TECHNICAL SPECIFICATIONS ARENA HIGHLINE 500, TOWER SPEAKER PERFORMANCE: Recommended amplifier power 25 - 100W RMS Maximum sensitivity (2.83V @ 1m) 88dB Nominal impedance 8 Ohms Frequency response (-6dB) 75Hz- 54kHz TM Drivers 1 x 100mm (4”) Dual Concentric with 19mm (0.75”) HF 1 x 100mm (4”) LF Crossover frequency 1.75kHz Magnetic shielding Yes Weight 14 kg (30.8 lbs) Dimensions H x W x D 1161 x 209 x 197 mm (45.69 x 8.23 x 7.76 ins) Finish Black gloss or silver gloss Supplied accessories Suppor
Краткое содержание страницы № 20
Check periodically for the latest manual revision that will always be available for download from www.tannoy.com The issue number of this manual is located below Part No. 6481 0481 / MAR 06 Tannoy United Kingdom T: +44 (0) 1236 420199 F: +44 (0) 1236 428230 E: enquiries@tannoy.com Tannoy North America T: (519) 745 1158 F: (519) 745 2364 E: inquiries@tannoyna.com Tannoy Deutschland T: +44 (0) 2246 900926 F: +44 (0) 2246 911259 E: info@tannoy.com
