Краткое содержание страницы № 1
iM05 iM05
Studio
Monitor Speakers
&
Architectural
Multi-zone Speakers
with
Balanced and Unbalanced
input connectors for
Monitoring and architectural
for fitting up to 500ft CAT5
cable wiring systems like
AMC XO, XOi etc.
USER GUIDE
Краткое содержание страницы № 2
Table of Contents Introduction ....................................................4 What's in the Box? ..............................................4 iM05 Features ..............................................4 Front and Rear Panel Features ...................................5 Installation ....................................................7 Connecting to Preamp or Computer Outputs .....................8 Placing theiM05......................................9 Appendix A - Technical Specificat
Краткое содержание страницы № 3
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARISED) PLUG WITHAN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR. UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SILES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCuNE PARTIE FOND SANS EN LAISSERAUCUNE PARTIEADECOUVERT. PRECAUCION: PARA EVITAR SACUDIDAS
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTION 1. READ INSTRUCTIONS 14. UNPLUG POWER CORD All the safety and operating instructions should be read Unplug this apparatus during lightning storms or when unused before the appliance is operated. for long periods of time. 2. RETAIN INSTRUCTIONS 15. OBJECT AND LIQUID ENTRY The safety and operating instructions should be retained for No object filled with liquids, such as vases, etc. shall be placed future reference. on the apparatus. 3. HEED WARNINGS 16. ACCESSORIES Al
Краткое содержание страницы № 5
Sets a new affordable standard in studio monitoring and architectural Introduction Multi-zone speakers systems Thank you for choosing the iM05 bi-amplified studio monitor & Architectural multi-zone speakers. The AMC iM05 is with Balanced and Unbalanced input connectors for Monitoring and architectural for fitting up to 500ft CAT5 cable wiring systems like AMC XO, XOi etc. AMC is well known for digital audio interface technology, digital converters, audio preamps and mixers. Now, after extensive
Краткое содержание страницы № 6
3.Sub-Frequency Port The air vent hole in the rear panel is called a Sub-Frequency Port and is designed to allow the discharge of extreme low frequencies occurring below 60Hz. 4.Enclosure Like the other components, the iM05's enclosure has an important role in shaping the overall sonic response. In order to provide more stable performance, the iM05's enclosure employs a special high-acoustic efficiency MDF and unique interior reinforcement designed to absorb vibration and impact generated under
Краткое содержание страницы № 7
1. XLR INPUT: This jack accepts XLR input connections with either balanced or unbalanced wiring. The input wiring of an XLR connector should be as follows: XLR PIN 1 Signal ground (Shield) XLR PIN 2 Signal positive (+) XLR PIN 3 Signal negative (-) 2. TRS INPUT: This jack accepts 1/4" connections with either balanced or unbalanced wiring. For balanced wiring, a three-conductor TRS plug is necessary. The input wiring of a TRS connector should be as follows: TRS TIP Signal positive (+) T
Краткое содержание страницы № 8
9.87 inches Front Panel Features The front panel houses the Power LED, which indicates whether the speakers (amplifier) power is on or off. Power HF Driver LF Driver LED (Tweeter) (Woofer) 6.5 inches Installation For optimal performance of the iM05, please read the following thoroughly and carefully prior to installation. Precautions Handling: Please do not touch the speaker cones. The iM05 set is packaged in the box tightly, so your attention is required when taking the monitors out of the box.
Краткое содержание страницы № 9
XLR Balanced Connection Assure that the power switch of the iM05 is turned off and that the volume control of the iM05 is turned down to a minimum. Connect the male end of an XLR balanced cable to the balanced input of the iM05 (refer to the following diagram for balanced connection). TRS Balanced/Unbalanced Connection Assure that the power switch of the iM05 is turned off and that the volume control of the iM05 is turned down to a minimum. Connect the male end of a TRS balanced or TS unbalanced
Краткое содержание страницы № 10
Placing the iM05 -Studio Monitor Speakers and Architectural Multi-Zone Speakers Studio Monitor Speaker Applications Placing the speakers is one of the most important procedures in order to monitor sound accurately. To monitor with the iM05's performing to their maximum capability, an appropriate listening environment and correct placement are required. Please refer to the following for correct iM05 placement. 1. The two units and the listener should basically align to form a regular triangle. Re
Краткое содержание страницы № 11
Appendix A - Technical Specifications Type: 2-way studio reference monitors & Architectural Speakers 5-inch cone with high temperature voice coil and damped rubber LF Driver: surround HF Driver: Specially developed dome with magnetic shielding Frequency Response: 56Hz - 22kHz Crossover Frequency: 3kHz LF Amplifier Power: 40W HF Amplifier Power: 30W S/N Ratio: > 100dB typical A-weighted 1 x XLR balanced input connector Input Connectors: 1 x TRS balanced/unbalanced input connector Polarity: Positi
Краткое содержание страницы № 12
www.amchome.com Part No.:21R-4212
