Краткое содержание страницы № 1
Stereo Radio, CD-R/RW Player
with Dual Alarm Clock
OWNER'S MANUAL
CKD1137
Visit our web site at www.emersonradio.com
CKD1137_053105.p65 27 1/6/2005, 14:22
Краткое содержание страницы № 2
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- The exclamation point within WARNING: TO REDUCE THE head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
Краткое содержание страницы № 3
Before We Begin Thank you.................. for purchasing this Emerson audio product. The Emerson brand is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this owner's manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and fo
Краткое содержание страницы № 4
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning ‘On’ the power, make electric heaters, on top of other stereo certain that the power cord is properly equipment that radiates too much installed. When moving the set, be heat, places lacking ventilation or sure to first disconnect the power cord. dusty areas, places subject to constant • Store
Краткое содержание страницы № 5
PREPARATION FOR USE Unpacking And Set Up • Remove the unit from the carton, and remove all packing materials from the unit. • Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment. • Remove any descriptive labels or stickers from the top or front of the unit. Do not remove any labels from the back or bottom of the cabinet. • Remove any small strip
Краткое содержание страницы № 6
Power Source This system is designed to operate on 120VAC 60Hz house current only. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty. Note: The system has polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlet, you probably have an outdated non-
Краткое содержание страницы № 7
Battery Back Up System This unit uses a single 9-Volt battery (not included) to maintain the time and alarm settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a well-known brand of Alkaline battery for longest life and best performance. To keep the battery back up system operational you should install a new battery every 6 to 9 months. Some people find it convenient to replace the back up batteries in their alarm cl
Краткое содержание страницы № 8
LOCATION OF CONTROLS AND INDICATORS 6 5 7 8 Top Panel 9 10 4 11 3 2 2 12 1 1 22 21 20 19 18 17 16 15 14 13 Front Panel 25 26 27 28 29 2 2 30 24 23 31 32 7 CKD1137_053105.p65 7 1/6/2005, 14:22
Краткое содержание страницы № 9
1.) Speakers. 2.) CD Door Lifting-To-Open Tab. 3.) VOLUME Control. 4.) CD compartment. 5.) AC Power Cord. 6.) Back Up Battery Compartment (At bottom cabinet). 7.) FM Wire Antenna. 8.) PHONES Jack. 9.) FUNCTION (FM/AM/CD) Selector Switch. 10.) ALARM MODE (BUZZER/MUSIC) Selector Switch. 11.) TUNING Control. 12.) SNOOZE Button. 13.) ALARM 2 Setting Button. 14.) SLEEP Button. 15.) POWER ‘On/Off’ Button. 16.) ALARM 1 Setting Button. 17.) CD Skip Forward Search/HR.(Hour) Button. 18.)
Краткое содержание страницы № 10
OPERATING INSTRUCTIONS Setting The Time Of Day • Connect the power cord to your AC outlet. Make sure to use an outlet that is always ‘ live’ . Do not use an outlet that is controlled by a wall switch. PROGRAM REPEAT RANDOM POWER FM ST. PM • When the unit is plugged in for the first time the display will show flashing “12:00” (AM). AL. 1 AL. 2 1.) While the display is ‘flashing’, press the HR. button to set the hour. Be sure to observe the PM indicator to set the hour correctly. If the PM i
Краткое содержание страницы № 11
Setting The Wake Up Times The unit has two separate wake up alarms that can be set and used independently. 1.) Press the ALARM 1 or ALARM 2 button once. The display will change from the respective time of the day to wake up time and begin flashing. The AL. 1 or AL. 2 indicator comes ‘ On’ . PROGRAM REPEAT RANDOM POWER FM ST. 2.) Press the HR. button to set the wake PM up hour. Set correctly for AM or PM. AL. 1 AL. 2 Press the MIN. button to set the minute correctly. 3.) Press the respective AL
Краткое содержание страницы № 12
Listening To The Radio PROGRAM REPEAT RANDOM POWER FM ST. 1.) Press the POWER button to turn the unit PM ‘ On’ . The POWER indicator comes ‘ On’ . AL. 1 AL. 2 2.) Set the FUNCTION selector (on right side panel) to FM or AM position. 3.) Turn the TUNING control to find the desired station. PROGRAM REPEAT RANDOM POWER FM ST. The FM ST. indicator light comes ‘ On’ If you PM tune to a FM Stereo station, . AL. 1 AL. 2 4.) Adjust the VOLUME control to the desired level. 5.) When you are finished liste
Краткое содержание страницы № 13
Antenna Information AM The AM ferrite bar antenna is inside the cabinet. If AM reception is unsatisfactory try turning the entire unit slightly until you find the direction that provides the best reception for the desired station. FM Make sure the FM lead wire antenna is extended to it’s full length. You may have to vary the direction of the wire antenna to find the position that provides the best reception. 12 CKD1137_053105.p65 12 1/6/2005, 14:22
Краткое содержание страницы № 14
Playing Compact Discs Note: Although this CD player can read CD-R and CD-RW discs, in addition to normal CDs, however the playability of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. Normal Playback 1.) Press the POWER button to switch the unit ‘ On’ . The POWER indicator comes ‘ On’ . 2.)
Краткое содержание страницы № 15
PROGRAM REPEAT RANDOM POWER FM ST. 5.) Two dashes “– –” flash while the player reads PM the table of contents of the disc. AL. 1 AL. 2 The display will show the total number of tracks for a few seconds and then return to the correct time. RANDOM POWER PROGRAM REPEAT FM ST. PROGRAM REPEAT RANDOM POWER FM ST. PM PM AL. 1 AL. 2 AL. 1 AL. 2 Note: If the disc is inserted incorrectly, or if the disc is badly scratched and cannot be read by the player, “no” will RANDOM POWER PROGRAM REPEAT FM ST. PM ap
Краткое содержание страницы № 16
9.) To stop playback at any time press the STOP/TIME button. After the last track has played the disc stops automatically. Lift the tab on side of CD door to open the CD door and remove your disc. To Start Playback From A Specific Track Load your disc and wait until the display shows the total number of tracks. Press the or buttons to select the desired track. PROGRAM REPEAT RANDOM POWER FM ST. PM While the selected track number is still flashing press the PLAY/PAUSE button. AL. 1 AL. 2 Playb
Краткое содержание страницы № 17
Repeat Playback You can program the player to repeat a single track or the entire disc continuously. One Track Repeat 1.) Load your disc and wait until the total track number is displayed. 2.) Press the P.MODE button once. PROGRAM REPEAT RANDOM POWER FM ST. PM The REPEAT indicator flashes. AL. 1 AL. 2 3.) Press or button to select the track to be repeated. PROGRAM REPEAT RANDOM POWER FM ST. When the track number is still flashing, press PM the PLAY/PAUSE button. The selected AL. 1 AL. 2 track
Краткое содержание страницы № 18
Programmed Playback The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired. Note: Programming can only be done while the player is in the Stop mode. If a disc is playing press the STOP/TIME button to stop playback before performing the programming steps below. 1.) Turn the unit ‘On’, select the CD f
Краткое содержание страницы № 19
7.) After you have programmed all the desired tracks press the PLAY/PAUSE button to begin programmed playback. The PROGRAM indicator stops flashing and remains ‘ On’. Playback will begin on the first track you programmed and continue until all programmed tracks have been played. PROGRAM REPEAT RANDOM POWER FM ST. PROGRAM REPEAT RANDOM POWER FM ST. PM PM AL. 1 AL. 1 AL. 2 AL. 2 Notes: • After all programmed tracks have played the player stops but the program remains in the memory. Press the PR
Краткое содержание страницы № 20
Alarm Operation This unit gives you the option of waking to an electronic BUZZER alarm, the AM, FM Radio, or the CD player. Note: Whichever alarm mode you select – BUZZER, CD, AM or FM – will apply to both alarms. Refer to “Setting The Wake Up Times” on page 10. Adjust the wake up time(s) if necessary. 1.) Set the ALARM MODE selector to BUZZER or MUSIC mode. If you selected MUSIC mode, you may set FUNCTION selector to FM, AM or CD mode as desired. 2.) Press the ALARM 1 and/or ALARM 2 buttons onc
