Руководство по эксплуатации Panasonic DVCPRO VTR AJ-HD1700

Краткое содержание страницы № 1

Panasonic Broadcast




AJ-HD1700
Menu Information

Краткое содержание страницы № 2

System menus Video output signal adjustments No./Item Description of setting The control matrix for the adjustments is shown in the table below. When “CMPNT” has been selected as the setup menu item 00 This enables one of a number of different signals No.650 (STYLE) setting to be output from the VIDEO OUT 2 output Setting Adjustment item WFM SEL connector. 0000 CTL: The CTL signal is output. 05: 06: 653: Y LVL (HD) 658: Y LVL (SD) 0001 TC: The time code signal is output. ENCODER V LEVEL 654: Pb

Краткое содержание страницы № 3

System menus No./Item Description of setting No./Item Description of setting 12 For adjusting the system phase of the HD SDI output. 15 For adjusting the system phase of the VIDEO OUT. When the button is pressed, the display transfers to When the button is pressed, the display transfers to SHIFT SHIFT SYS H the submenu screen; press the button again to VO SYS the submenu screen; press the button again to SHIFT SHIFT UP DW (HD)* return the display from the submenu screen. H (SD)* return the displ

Краткое содержание страницы № 4

System menus No./Item Description of setting No./Item Description of setting 18 For adjusting the SCH phase. 30 For selecting whether to set or release the When the button is pressed, the display transfers to system file lock mode. SHIFT DW SCH (SD)* the submenu screen; press the button again to MENU LOCK 0000 OFF: Lock released (changes enabled) SHIFT return the display from the submenu screen. 0001 ON: Lock set (changes prohibited) Submenu screen Even when “ON” is selected, the data wi

Краткое содержание страницы № 5

Setup menus No./Item Description of setting No./Item Description of setting 1 000 For setting the preroll time. For setting whether or not to synchronize the 004* phases between two decks. Any time from 0 to 30 seconds can be set in 1- P-ROLL TIME 0000 OFF: SYNCHRONIZE second increments. The phases are not synchronized. The edit 0000 0s points will be off by several frames but editing :: will be commenced more promptly. 0005 5s 0001 ON: :: The phases are synchronized. Error-free 0030 3

Краткое содержание страницы № 6

Setup menus (continued) No./Item Description of setting No./Item Description of setting 006 009 For setting the display type for the • The following mode displays appear depending on superimposed displays and for the HD SDI the format used. DISPLAY SEL CHARA TYPE MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors as well as for the SETUP DVCPRO HD-LP > DVCPRO_HD-LP MENU, etc. DVCPRO HD > DVCPRO_HD 0000 WHITE: White characters on a black DVCPRO50 > DVCPRO_50 bac

Краткое содержание страницы № 7

Setup menus (continued) Formats in which the tape is played back No./Item Description of setting 022: 020: 023: PB SYS FORMAT Playback format 022 For selecting the format in which the tape is FORMAT FORMAT SEL to be played back. PB FORMAT 0000 MANU: HD_LP DVCPRO HD-LP(1080i) The format is determined by the setting selected for HD_SP DVCPRO HD(1080i) setup menu item No.023 (FORMAT SEL). 0001 AUTO: 422 DVCPRO50(422) The tape is played back in the format in which it was 411 DVCPRO(411) 10

Краткое содержание страницы № 8

Setup menus No./Item Description of setting No./Item Description of setting 100 For selecting the direct search dial operation. 106 For selecting the video and audio output 0000 DIAL: statuses in the EJECT mode. SEARCH ENA Direct search dial operations are performed. EJECT EE SEL 0000 EE: 0001 KEY: The EE mode is always established regardless of Operation does not transfer to the search the setup menu item No.140 (OUTPUT) setting. mode unless the SHTL, JOG or VAR button is 0001 BLACK

Краткое содержание страницы № 9

Setup menus (continued) No./Item Description of setting No./Item Description of setting 1 112 For selecting what playback images are to be For selecting whether to allow or inhibit recording 113* output in the STANDBY OFF mode and EJECT on the cassette tape. FRZ MODE mode. 0000 OFF: REC INH SEL 0000 DIS: Recording on the cassette tape is enabled when the The video output is muted. cassette’s accidental erasure prevention mechanism 0001 STB OFF: has been set to the recording enable po

Краткое содержание страницы № 10

Setup menus (continued) No./Item Description of setting No./Item Description of setting 1 116 For selecting whether the EJECT lamp is to remain For selecting the output signals. 140* lighted or go off after the cassette tape has been 0000 EE: EJECT LAMP ejected. : OUTPUT 0000 MODE1: The input signals selected by setup menu items The EJECT lamp remains lighted. No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL) 0001 MODE2: to No.724 (D IN SEL 78) are output. The EJECT lam

Краткое содержание страницы № 11

Setup menus No./Item Description of setting No./Item Description of setting 200 For selecting whether to operate two or more 209 For setting whether or not to return the ACK VTRs in synchronization. code when a command is received from RS- PARA RUN 0000 DIS: The VTRs are not operated in RETURN ACK 232C. synchronization. 0000 OFF: The ACK code is not returned. 0001 ENA: The VTRs are operated in 0001 ON: The ACK code is returned. synchronization. 212 For selecting the remote control co

Краткое содержание страницы № 12

Setup menus No./Item Description of setting No./Item Description of setting 300 For selecting the operation to be performed when 308 For setting the maximum speed of VAR FWD. an edit point has been set incorrectly (when the 0000 i4.9: i4.9 times normal tape speed IN/OUT DEL OUT point comes before the IN point). VAR FWD 0001 i2: i2 times normal tape speed 0000 MANU: MAX (i1.85 times normal tape Editing is not performed unless the illegal edit speed for formats other than point is cleared o

Краткое содержание страницы № 13

Setup menus (continued) No./Item Description of setting No./Item Description of setting 1 1 For setting the allocation of the channels for As with setup menu item No.320, the VTR’s 320* 323* the analog audio presets of a controller when CH4 edit presets are set to ON or OFF a controller without a function to control the following the analog audio signals specified EDIT RPLCE1 EDIT RPLCE4 edit presets of the digital audio signals is by the controller. used to edit the digital audio signal

Краткое содержание страницы № 14

Setup menus No./Item Description of setting No./Item Description of setting 400 For selecting the duration of the time taken 403 For selecting the operation to be performed after the VTR is left standing in the STOP or when the tape protection mode is established STILL TIMER search STILL mode (JOG, VAR or SHTL) STOP after the VTR has been left standing in the before the tape protection mode is PROTECT STOP mode. established. 0000 STEP: STEP FWD (Units: s = seconds, min = minutes)

Краткое содержание страницы № 15

Setup menus No./Item Description of setting No./Item Description of setting 4 1 For selecting whether or not to output the For selecting the regeneration signal when 500* 505* VITC signal at the positions selected by setup REGEN has been selected as the TCG (time menu items No.501 (VITC POS-1) and No.502 code generator) mode. VITC BLANK TCG REGEN (VITC POS-2). 0000 TC&UB: 0000 BLANK: The VITC signal is not output. Regeneration applies to both the time code 0001 THRU: The VITC signal

Краткое содержание страницы № 16

Setup menus (continued) No./Item Description of setting No./Item Description of setting 1 For setting how the user’s bit of the time code 513 For selecting how to output the VITC which is 508* generated by the TCG is to be used. superimposed on the output video signal. 0000 000: VITC OUT 0000 SBC: BINARY GP NOT SPECIFIED (no character set specified) In the playback mode, the time code recorded 0001 001: in the SBC area is output. ISO CHARACTER (8-bit character set 0001 VAUX: complyi

Краткое содержание страницы № 17

Setup menus

Краткое содержание страницы № 18

Setup menus (continued)

Краткое содержание страницы № 19

Setup menus (continued)

Краткое содержание страницы № 20

Setup menus (continued)