Краткое содержание страницы № 1
Camera/VTR
Operating Instructions
Model No. AJ- P
Model No. AJ- P
Before operating this product, please read the instructions carefully and save this manual for future use.
Printed in Japan
@
P VQT0N11 F0904W0 -F
Краткое содержание страницы № 2
RBRC FCC Note: CAUTION This equipment has been tested and found to comply RISK OF ELECTRIC SHOCK with the limits for a class A digital device, pursuant to DO NOT OPEN Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). interference when the equipment is operated in a NO USER SERVICEABLE PARTS INSIDE. commercial environment. This equipment generates, REFER TO SERVICIN
Краткое содержание страницы № 3
Contents 4-5 Setting the time data ................................ 32 Chapter 1 General .................................... 5 4-5-1 Setting the user bits ..................................... 32 1-1 Features of the camera unit ...................... 5 4-5-2 Setting the internal clock’s date and time .... 33 1-2 Features of the VTR unit ........................... 6 4-5-3 Setting the time code ................................... 34 1-3 System configuration ................................ 7 4-5
Краткое содержание страницы № 4
Contents 7-3-11 FLARE ......................................................... 88 5-4 Audio input signal preparations ............. 66 7-3-12 CAMERA SETTING .................................... 89 5-4-1 When using the front microphone ............... 66 5-4-2 When using an external microphone ........... 66 7-4 VF .............................................................. 89 5-4-3 When using a wireless receiver ................... 67 7-4-1 VF DISPLAYS .......................................
Краткое содержание страницы № 5
Chapter 1 General The models AJ-SDC615 and AJ-SDC905 are camera recorders featuring three CCD image sensors which each have a 2/3-inch 1 on-chip lens. The AJ-SDC905 supports both the DVCPRO and DVCPRO50 formats. (The AJ-SDC615 supports only the SDC905 SDC615 DVCPRO format.) Both camera recorders feature a compact size, light weight, low power consumption, high image quality, high sensitivity, excellent mobility and outstanding dust-proof and moisture-proof characteristics. They are ideally sui
Краткое содержание страницы № 6
Chapter 1 General 1-2 Features of the VTR unit ≥ DVCPRO and DVCPRO50 formats supported SDC615 ≥ NEWS REC function SDC905 This function especially supports shooting in the context of news gathering or documentary filming to ensure that The VTR unit compresses the images using a component shutter opportunities are not passed up. digital recording system that uses the latest compression By controlling the start key acknowledgment time, the unit technology, and for the sound it employs non-compres
Краткое содержание страницы № 7
Chapter 1 General ≥ Built-in time code generator/reader ≥ DVCPRO (IEEE 1394 digital input/output) 1 connector provided This enables the time code information to be recorded on The unit is standard equipped with an input/output the dedicated sub-code track and played back. connector for signals complying with the IEEE 1394 standard. ≥ Metadata supported This connector can be connected with an external unit using The unit allows information from the AJ-GPS900G GPS unit an IEEE 1394 cable. to be r
Краткое содержание страницы № 8
Chapter 2 Parts and their functions 2-1 Power supply and accessory mounting section 5 7 6 6 2 9 8 : 1 4 3 > = ; < 1 POWER switch : Lens mount cap This switch turns the power ON and OFF. To remove the cap, push the lens lever 9 up. Keep the cap in place while the lens is not attached. 2 Battery mount This is for attaching the Anton Bauer battery pack. ; Lens cable/microphone cable clamp This clamp is for anchoring the lens cable or microphone 3 DC IN (external power input) socket (XLR, 4-pin) ca
Краткое содержание страницы № 9
Chapter 2 Parts and their functions 2-2 Audio function section (input system) = < > ; : 3 7 2 2 6 8 ? 4 ? @ 5 9 1 1 MIC IN (microphone input) jack (XLR, 3-pin) 5 AUDIO IN CH1/CH2 (audio input channel 1 & 2) Connect the microphone (optional accessory) here. The connectors (XLR, 3-pin) power for the microphone is supplied from this jack. An audio component or microphones are connected here. 2 AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 recording 6 LINE/MIC/+48V (line input/mic input/mic input + 48V
Краткое содержание страницы № 10
Chapter 2 Parts and their functions 2-2 Audio function section (output system) 9 AUDIO OUT connector (XLR, 5-pin) SDC615 MONITOR SELECT (audio selection) The audio signals recorded on audio channels 1 and 2 or CH1O1/2OCH2 selector switch audio channels 3 and 4 are output from this connector. This is linked with the MONITOR SELECT STOMIX With the AJ-SDC905 , the signals to be output SDC905 selector switch and used to select the sound which is to be can be selected using the MONITOR SELECT output
Краткое содержание страницы № 11
Chapter 2 Parts and their functions 1 4 9 8 D G H 6 5 /REW FF/ EJECT STOP PLAY/PAUSE ª 1/; 2 E F : 3 ; ? @ 2 <567 > = C AB I 2-3 Shooting and recording/playback When white balance or black balance are being function section automatically adjusted and the switch is pressed again to either the AWB side or to the ABB side, the automatic adjustment for the side pressed will be stopped. Shooting and recording (camera unit) The adjusted value in this case is the value before automatic adjustme
Краткое содержание страницы № 12
Chapter 2 Parts and their functions 6 OUTPUT/AUTO KNEE selector switch 9 MARKER SELECT button This switch selects the video signals which are to be output This is used to select the marker information displays on from the camera unit to the VTR unit, viewfinder and/or the viewfinder screen. Each time it is pressed, the two video monitor. marker information display screens set by the menu are CAM. AUTO KNEE ON: switched in the following sequence: A (A marker display) 5 The images shot by the ca
Краткое содержание страницы № 13
Chapter 2 Parts and their functions = OUTPUT SEL (output signal selection) switch B GENLOCK IN connector This is used to select the signals output from the VIDEO The reference signal is input to this connector when OUT connector and MON OUT connector. genlock is to be established with the camera unit or when VTR : In the recording or other EE mode, the camera the time code is to be externally locked. This signal can images are output from the connectors; in the also be used as the return signa
Краткое содержание страницы № 14
Chapter 2 Parts and their functions F PLAY/PAUSE button 2-4 Menu operation section This is pressed to view the playback picture on the viewfinder screen or using a color video monitor. The button’s lamp comes on during playback. When it is pressed during playback, the unit is set to pause in the playback mode (PLAY PAUSE), and the button’s lamp flashes. If the unit is left in the pause mode for two minutes, it automatically changes to the stop (STOP) mode. G REW (rewind) button and lamp 4 Whe
Краткое содержание страницы № 15
Chapter 2 Parts and their functions 2-5 Time code related section 4 5 6 2 9 1 3 2 8 7 1 GENLOCK IN connector (BNC) 7 “+” button, “–” button The reference signal is input to this connector when These are used to increment or decrement by 1 the figure genlock is to be established with the camera unit or when in the digit which was made to flash by the SHIFT button 8 the time code is to be externally locked. when the time code or user bits are to be set. 2 TC IN connector (BNC) 8 SHIFT button Supp
Краткое содержание страницы № 16
Chapter 2 Parts and their functions 2-6 Warning/status display section 2-7 Display window and its displays Remaining tape and remaining battery charge and audio channel level displays 1 2 Remaining tape display The remaining tape time is displayed using 7 segments. The remaining tape time indicated by each segment is set to 3 minutes or 5 minutes using TAPE REMAIN/∫ on the VTR MENU “BATTERY/TAPE” 4 screen. Each time the number of minutes set for the segments elapses, one segment is cleared. 3
Краткое содержание страницы № 17
Chapter 2 Parts and their functions Time code-related switch settings and display items Mode displays W: Lights when the 16:9 aspect ratio mode is established. GPS: Lights when signals cannot be received during GPS operation. GPS : Lights when signals are being received during GPS operation. DISPLAY switch TCG switch position Display item P-REC: Lights in pre-recording mode and flashes during the time set for position 2 pre-recording after the tally lamp for recording has turned off. iREC:Light
Краткое содержание страницы № 18
Chapter 2 Parts and their functions 8 Back tally lamp 2-8 Viewfinder section This lamp lights while the VTR unit is recording. It also flashes to provide a warning display like the REC lamp inside the viewfinder. = > ; 7 9 When the lever is set to OFF, the back tally lamp is hidden. : 9 Eyepiece < : Diopter adjustment ring 1 This is adjusted in line with the camera operator’s diopter in such a way that the user can see the image on the viewfinder screen most clearly. 8 ; Connecting plug ON 45
Краткое содержание страницы № 19
Chapter 3 Recording and playback 3-1 Cassette tapes Loading a cassette tape Checking for tape slack Gently push in the reel using your finger and turn the reel in the direction of the arrow. If the reel fails to turn, it means Set the POWER switch to ON. 1 there is no tape slack. 3 When condensation has formed inside the unit, the HUMID display lights. Wait until this display is cleared before proceeding with the intended operation. HUMID display Ejecting the cassette tape While the pow
Краткое содержание страницы № 20
Chapter 3 Recording and playback 3-2 Basic procedures This section describes the basic steps for shooting and Up to performing the switch settings recording. Provide the power supply, and load the cassette. Next, set Before actually departing to shoot scenes, carry out each switch as shown in the figure below, and then proceed inspections to ensure that the system is functioning properly. to operate. * For details on how to perform these inspections, refer to “6-1 Switch settings for shooting
