Краткое содержание страницы № 15
Hints for Better Shooting/Checking the Recorded Picture S T A N D B Y Checking the Recorded Picture Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder. (1) While pressing the small green button on the POWER switch, slide it to CAMERA. (2) Turn STANDBY up. (3) Press EDITSEARCH. Press the – (Î) side momentarily, the last few seconds of the recorded portion plays back (Rec Review). Hold down the – side of EDITSEARCH until the camcorder goes back
Краткое содержание страницы № 16
Connections for Playback You can use this camcorder as a VCR by connecting it to your TV for playback. It is recommended to use the house current as the power source (p. 19). If a VCR is connected to a TV Open the jack cover and connect the camcorder to LINE IN on the VCR by using the supplied A/V connecting cable. Set the input selector on the VCR to LINE. Set the TV/VCR selector to VCR on the TV. : Signal flow Connecting Directly to a TV Open the jack cover and connect the camcorder to your TV
Краткое содержание страницы № 17
Connections for Playback/Playing Back a Tape Playing Back a Tape You can monitor the playback picture in the viewfinder. You can also monitor on the TV screen, after connecting the camcorder to the TV/VCR (p. 16). You can control playback using the supplied Remote Commander. (1) While pressing the small green button on the POWER switch, slide it to PLAYER. (2) Insert the recorded tape with the window facing out. (3) Press (. Playback starts. PLAY REW FF STOP PAUSE To stop playback, press p. To r
Краткое содержание страницы № 18
Playing Back a Tape Various Playback Modes To view a still picture (playback pause) Press P during playback. To resume playback, press P or (. To locate a scene (Picture Search) Keep pressing 0 or ) during playback. To resume normal playback, release the button. To monitor the high-speed picture during fastforward or rewind (Skip Scan) Keep pressing 0 while rewinding or ) while advancing the tape. To resume normal playback, press (. Notes on playback • Streaks appear and the sound is muted in
Краткое содержание страницы № 19
Playing Back a Tape/Using Alternative Power Sources Advanced Operations Using Alternative Power Sources You can choose any of the following power sources for your camcorder: battery pack (p.6), the house current, alkaline battery, and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder. Place Power source Accessory to be used Indoors House current Supplied AC power adaptor Outdoor Battery pack Battery pack NP-33 (supplied), NP-98/98D, NP-80/
Краткое содержание страницы № 20
Using Alternative Power Sources WARNING AC power cord must only be changed at qualified service shop. PRECAUTIONS The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Notes on the POWER lamp •The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal. •If the POWER lamp does not light, disconnect the power cord. After about one minute, reconnect the power cor
Краткое содержание страницы № 1
3-810-917-13 (1)
Video Camera
Recorder h
CCD-TR78/TR88/TR98
Operation Manual
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record
the serial number in the space provided below. Refer to these
numbers whenever you call upon your Sony dealer regarding this
product.
Model No. CCD-
Model No. AC-
Serial No. Serial No.
CCD-TR98