Краткое содержание страницы № 1
TMS320DM6446 DVEVM v2.0
Getting Started Guide
Literature Number: SPRUE66E
December 2008
Краткое содержание страницы № 2
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the t
Краткое содержание страницы № 3
EVALUATION BOARD/KIT IMPORTANT NOTICE Texas Instruments (TI) provides the enclosed product(s) under the following conditions: This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMON- STRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to b
Краткое содержание страницы № 4
FCC Warning This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMON- STRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equi
Краткое содержание страницы № 5
This is a draft version printed from file: pref.fm on 12/18/08 Preface About This Guide The DVEVM (Digital Video Evaluation Module) kit is an evaluation platform that showcases the DM644x architecture and lets users evaluate the power and performance of the DM644x as a multimedia engine. This guide gives you overview information about the board and the software provided with the board. It is intended to be used as an introductory document for the DVEVM. Other documents provide more in-depth inf
Краткое содержание страницы № 6
Notational Conventions Notational Conventions This document uses the following conventions: ❏ Program listings, program examples, and interactive displays are shown in a mono-spaced font. Examples use bold for emphasis, and interactive displays use bold to distinguish commands that you enter from items that the system displays (such as prompts, command output, error messages, etc.). ❏ Square brackets ( [ and ] ) identify an optional parameter. If you use an optional parameter, you specify the i
Краткое содержание страницы № 7
This is a draft version printed from file: davinci_gsgTOC.fm on 12/18/08 Contents 1 DVEVM Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 This chapter introduces the DVEVM (Digital Video Evaluation Module) kit. 1.1 Welcome! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 1.2 What’s in this Kit? . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 8
Contents 4.3.5 Exporting a Shared File System for Target Access . . . . . . . . . . . . . . . . . . . 4-9 4.3.6 Testing the Shared File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 4.3.7 Configuring the Boot Setup for PAL Video Users . . . . . . . . . . . . . . . . . . . . 4-12 4.3.8 Notes on Using Evaluation/Production Codecs . . . . . . . . . . . . . . . . . . . . . 4-12 4.4 Setting Up the Build/Development Environment . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 9
Chapter 1 DVEVM Overview This chapter introduces the DVEVM (Digital Video Evaluation Module) kit. Topic Page 1.1 Welcome! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 What’s in this Kit? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 1.3 What’s on the Board? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4 1.4 What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 10
Welcome! 1.1 Welcome! Your new DVEVM (Digital Video Evaluation Module) kit will allow you to evaluate TI’s new TM DaVinci Technology and the DM644x architecture. This technology brings together system-solution components tailored for efficient and compelling digital video and audio. 1-2
Краткое содержание страницы № 11
What’s in this Kit? 1.2 What’s in this Kit? Your DVEVM kit contains the following hardware items. Section 2.1, Setting Up the Hardware tells how to connect these components. ❏ EVM Board. This board contains a DaVinci TMS320DM6446 dual- core device with an ARM9 and C64+ DSP for development of applications that use both a general-purpose processor and an accelerated DSP processor. ❏ Hard Disk Drive. The hard drive provided with the EVM is a 2.5" Spinpoint drive with 40 GB of storage. The drive spe
Краткое содержание страницы № 12
What’s on the Board? 1.3 What’s on the Board? The EVM comes loaded with peripherals your multimedia applications may need to make use of. The hard drive on the board also comes pre- loaded with demonstration software. The following block diagram shows the major hardware components. Diagram provided courtesy of Spectrum Digital Inc. Figure 1–1 EVM Hardware Block Diagram For more information about the EVM hardware, see the DaVinci EVM website at http://c6000.spectrumdigital.com/davincievm. The Da
Краткое содержание страницы № 13
What’s Next? 1.4 What’s Next? To get started evaluating the DVEVM kit and developing applications for the DM644x, begin by using this Getting Started guide. It will step you through connecting the hardware, testing the software, and beginning to develop applications. When you are ready for more information about DaVinci Technology and the DM644x architecture, see the following: ❏ Spectrum Digital website: http://c6000.spectrumdigital.com/davincievm ❏ TI Linux Community for DaVinci Processors:
Краткое содержание страницы № 14
1-6
Краткое содержание страницы № 15
Chapter 2 EVM Hardware Setup This chapter tells you how to set up the EVM hardware. Topic Page 2.1 Setting Up the Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 2.2 Connecting to a Console Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6 2-1
Краткое содержание страницы № 16
Setting Up the Hardware 2.1 Setting Up the Hardware To set up the hardware provided with the EVM, use the steps in the sections that follow. You may skip sections if you do not need to access a particular peripheral. For example, if you do not need to use the serial cable, skip that section. 1) The EVM is sensitive to static discharges. Use a grounding strap or other device to prevent damaging the board. Be sure to connect communication cables before applying power to any equipment. 2) If you us
Краткое содержание страницы № 17
Setting Up the Hardware 4) Connect the red and white audio cables to the EVM Audio Output and the LCD display R/L Audio Input jacks as shown below: 5) Connect the BNC-to-RCA connector to the coax cable. Then connect the coax cable to the video camera and the EVM Video Input. 6) Connect the power jack for the video camera. To be ESD safe, do not plug in the other end of the camera power cord until the later step that instructs you to do so. See Section A.1, Changing the Video Input/Output Methods
Краткое содержание страницы № 18
Setting Up the Hardware 7) Connect the microphone to the EVM. 8) Connect the power cable to the EVM power jack on the board. To be ESD safe, do not plug in the other end of the cable yet. 9) If you will use the Ethernet connection, connect the Ethernet cable to the Ethernet Port on the EVM and to an Ethernet network port. Note that the U-Boot bootargs must include "ip=dhcp" to enable the network connection. 2-4
Краткое содержание страницы № 19
Setting Up the Hardware 10) If you plan to use the UART port for a console window, connect the RS-232 null modem cable to the EVM UART port and a COM port on your host Linux workstation. See Section 2.2, Connecting to a Console Window for more about using a console window. 11) Plug in the LCD display to a power supply. 12) Plug in the NTSC/PAL video camera to a power supply. 13) Connect the power cable to the EVM power jack on the board. To be ESD safe, plug in the other end of the power cable o
Краткое содержание страницы № 20
Connecting to a Console Window 2.2 Connecting to a Console Window You can open a console window that allows you to watch and interrupt EVM boot messages by following these steps: 1) Connect a serial cable between the serial port on the EVM and the serial port (for example, COM1) on a PC. 2) Run a terminal session (such as Minicom on Linux or HyperTerminal on Windows) on the workstation and configure it to connect to that serial port with the following characteristics: ■ Bits per Second: 115200
