Краткое содержание страницы № 1
ELECTRONIC CASH REGISTER
-
TE 100
Eu Di U.K.
USER'S MANUAL
THANK YOU
YOUR RECEIPT
CALL AGAIN !
GROCERY
DAIRY
H.B.A.
FROZEN
FOOD
DELICATESSEN
Краткое содержание страницы № 2
Safety Precautions • To use this product safely and correctly, read this manual thoroughly and operate as instructed. After reading this guide, keep it close at hand for easy reference. Please keep all informations for future reference. • Always observe the warnings and cautions indicated on the product. About the icons In this guide various icons are used to highlight safe operation of this product and to prevent injury to the operator and other personnel and also to prevent damage to property
Краткое содержание страницы № 3
Warning! Never try to take the register apart or modify it in any way. High-voltage components inside the register create the danger of fire and electric shock. • Contact CASIO service representative for all repair and maintenance. Power plug and AC outlet Use only a proper AC electric outlet (100V~240V) . Use of an outlet with a different voltage from the rating creates the danger of malfunction, fire, and electric shock. Overloading an electric outlet creates the danger of overheating and fir
Краткое содержание страницы № 4
Introduction & Contents Introduction & Contents ...................................................................................... 4 Getting Started ..................................................................................................... 7 Remove the cash register from its box. ............................................................................ 7 Remove the tape holding parts of the cash register in place. ........................................... 7 Install the three
Краткое содержание страницы № 5
Programming general printing control............................................................................. 44 Programming compulsory and clerk control function ...................................................... 45 Programming read/reset report printing control .............................................................. 46 Setting a store/machine number ......................................................................................... 46 Programming to clerk .................
Краткое содержание страницы № 6
User'sManual Introduction & Contents Unpacking the register Mode key (Operator/Program key) User's manual/ Drawer key Take-up reel Roll paper Memory backup batteries Welcome to the CASIO TE-100! Congratulations upon your selection of a CASIO Electronic Cash Register, which is designed to provide years of reliable operation. Operation of a CASIO cash register is simple enough to be mastered without special training. Everything you need to know is included in this manual, so keep it on hand
Краткое содержание страницы № 7
User'sManual Getting Started This section outlines how to unpack the cash register and get it ready to operate. You should read this part of the manual even if you have used a cash register before. The following is the basic set up procedure, along with page references where you should look for more details. 1. Remove the cash register from its box. Make sure that all of the parts and accessories are included. 2. Remove the tape holding parts of the cash register in place. Also remove the small
Краткое содержание страницы № 8
Getting Started Install the three memory backup batteries. (continued…) 3. 3. Note the (+) and (–) markings in the battery compartment. Load a set of three new SUM- 3 (UM-3) batteries so that their positive (+) and negative (–) ends are facing as indicated by the markings. 4. Replace the battery compartment cover. 5. Close the platen arm and replace the printer cover. Important! These batteries protect information stored in your cash register's memory when there is a power failure or when you un
Краткое содержание страницы № 9
Install receipt/journal paper. 4. Platen arm Platen Printer Important! Take away the head protection sheet from the printer and close the platen arm. Caution! (in handling the thermal paper) • Never touch the printer head and the platen. • Unpack the thermal paper just before your use. • Avoid heat/direct sunlight. • Avoid dusty and humid places for storage. • Do not scratch the paper. • Do not keep the printed paper under the following circumstances: High humidity and temperature/direct sunligh
Краткое содержание страницы № 10
Getting Started To install journal paper Step 1 Remove the printer cover. Step 7 Step 2 Slide the leading end of Open the platen arm. the paper into the groove on the spindle of the take- up reel and wind it onto the reel two or three turns. Step 3 Step 8 Ensuring the paper is being Replace the paper guide of fed from the bottom of the the take-up reel. roll, lower the roll into the space behind the printer. Step 9 Step 4 Place the take-up reel into Put the leading end of the place behind the pr
Краткое содержание страницы № 11
5. Plug the cash register into a wall outlet. Be sure to check the sticker (rating plate) on the side of the cash register to make sure that its voltage matches that of the power supply in your area. 6. Insert the mode key marked “PGM” into the mode switch. PGM OP CAL C-A32 C-A02 REG OFF RF PGM Turn the mode key to the “REG” position. 7. The display should change to the following. CAL X REG Z OFF RF PGM 11 E Getting Started
Краткое содержание страницы № 12
PGM PGM PGM C-A32 C-A32 C-A32 Getting Started Set the date. 8. CAL X REG Z 61s6::::::6X6C OFF Year Month Day RF Current date PGM Example: 15, March 2002 2 020315 Mode Switch 9. Set the time. CAL X REG Z 61s6::::6X6C OFF Current time RF Example: PGM 08:20 AM20820 09:45 PM22145 Mode Switch Select printouts receipt or journal. 10. CAL X Issue receipt =0 REG 61s66h6s Z { } Print journal =1 OFF RF PGM Mode Switch Note ! If you need journal and are sometimes required receipts by customers, select “iss
Краткое содержание страницы № 13
PGM C-A32 11. Tax table programming This cash register is capable of automatically calculating up to four different sales taxes. The sales tax calculations are based on rates, so you must tell the cash register the rates, the type of tax (add-in or add- on), and the type of rounding to apply. Note that special rounding methods (page 15) are also available to meet certain local tax requirements. Important! After you program the tax calculations, you also have to individually specify which departm
Краткое содержание страницы № 14
PGM C-A32 Getting Started 11. Tax table programming (continued…) Programming tax calculations (with special rounding) Prepare the following subjects: 1. Tax rates 2. Rounding method for tax calculation (Round up/Round off/Cut off) 3. Tax calculation system (No/Add-on/Add-in) 4. Rounding system (Special rounding 1/Special rounding 2/Special rounding 3/Danish rounding /Australian rounding) :only effective for Tax Table 1 CAL X Programming procedure REG Z OFF RF PGM Mode Switch 4 3s 4 0125s Assign
Краткое содержание страницы № 15
11. About special rounding… Besides cut off, round off and round up, you can also specify “special rounding” for subtotals and totals or changes. Special rounding converts the right-most digit(s) of an amount to “0” or “5” to comply with the requirements of certain areas. 1 Special Rounding 1 Last (right-most) digit Rounding result Examples: 0 ~ 2 2 0 1.21 ➔ 1.20 3 ~ 7 2 5 1.26 ➔ 1.25 8 ~ 9 2 10 1.28 ➔ 1.30 2 Special Rounding 2 Last (right-most) digit Rounding result Examples: 0 ~ 4 2 0 1.12 ➔ 1
Краткое содержание страницы № 16
PGM C-A32 Getting Started 12. For Australia only You can set some programmable options to suit the Australian GST by the following procedure. CAL X REG Z (Execution) 601012001s66a OFF (Cancellation) 6s RF PGM After completion of this procedure, the “GST system was changed” message was printed on receipt and; Mode Switch 1 Tax symbol (*) is printed. 2 Taxable amount is skipped. 3 “GST INCLUDED” is set to the TX1 descriptor. 4 “TAXABLE AMT” is set to the TA1 descriptor. 5 Total line is printed eve
Краткое содержание страницы № 17
Introducing TE-100 General guide This part of the manual introduces you to the cash register and provides a general explanation of its various parts. display drawer keyboard pop-up display printer cover take-up reel main operator customer Take-up reel Pop-up display (customer display) Roll paper Main display Printer Mode switch Keyboard Multipurpose tray Drawer Drawer lock Printer cover Roll paper Drawer You can use the roll paper to print receipts and a The drawer opens automatically
Краткое содержание страницы № 18
Introducing TE-100 Mode switch Use the mode keys to change the position of the mode switch and select the mode you want to use. Mode Switch Mode Name Description X CAL RESET Reads sales data in memory and clears the data. Z Z REG READ Reads sales data in memory without clearing the data. X OFF CALCULATOR Use this mode for calculator. CAL RF REGISTER Use this mode for normal registration. REG PGM STAND-BY Cash register standing by. OFF REFUND Use this mode to register refund transaction. RF PROGR
Краткое содержание страницы № 19
Displays Main Display Pop-up (customer) display (alphanumeric + numeric display) (numeric display) Item registration (by department/PLU) alphanumeric display AMOUNT !50 !50 RPT RECEIPT TOTAL CHANGE ON 5 2 1 1 Repeat registration AMOUNT 3 "50 3 "50 RPT RECEIPT TOTAL CHANGE ON 3 1 3 2 1 Totalize operation AMOUNT _ 1"34 _ 1"34 RPT RECEIPT TOTAL CHANGE ON 5 2 1 5 4 1 Amount/Quantity Note that only one digit is displayed for the number This part of the display shows monetary amounts. of repeats
Краткое содержание страницы № 20
Introducing TE-100 Keyboard D E F RECEIPT VAT ON/OFF 61218 24 G H RC PD 51117 23 MR C M 1 2 3 I J OPEN # FEED CH CHK CLK# 78 9 41016 22 NS 4 5 6 K PRICE SUBTOTAL % PLU 45 6 3 9 15 22 8 L 7 9 X — RF DATE 12 3 2 8 14 21 TIME CA AMT 0 A B TEND POST ERR.CORR RECEIPT C CANCEL 000 • EXCHG C/AC 1 7 13 19 • Register Mode 9 Multiplication/Date/Time key X 1 Paper feed key f Use this key to input a quantity for a multiplication Hold this key down to feed paper from the printer. operation. Between transact
