Краткое содержание страницы № 1
™
ThinkCentre
Hardware Maintenance Manual
Types 8127, 8183, 8184, 8320, 8416,
8417, 8418, 8419, and 8429
Краткое содержание страницы № 2
Краткое содержание страницы № 3
™ ThinkCentre Hardware Maintenance Manual Types 8127, 8183, 8184, 8320, 8416, 8417, 8418, 8419, and 8429
Краткое содержание страницы № 4
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 187. Sixth Edition (February 2005) INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION ″AS IS″ WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE LIMITED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimers or express or implied warranties
Краткое содержание страницы № 5
Contents Replacing the battery . . . . . . . . . . .31 Chapter 1. About this manual . . . . .1 Replacing the power supply . . . . . . . . .32 Important Safety Information . . . . . . . . .1 Replacing the system board, microprocessor, and Strategy for Replacing FRUs for CTO, CMV, and heat sink . . . . . . . . . . . . . . .34 GAV products . . . . . . . . . . . . . .2 Replacing the microprocessor . . . . . . .38 Product definition . . . . . . . . . . .2 Replacing internal drives
Краткое содержание страницы № 6
Advanced Power Management . . . . . . 150 Electrical safety . . . . . . . . . . . . 154 Automatic Hardware Power Management Safety inspection guide . . . . . . . . . 155 features . . . . . . . . . . . . . . 150 Handling electrostatic discharge-sensitive Setting Automatic Hardware Power devices . . . . . . . . . . . . . . 156 Management features . . . . . . . . . . 150 Grounding requirements . . . . . . . . 157 Automatic Power-On features . . . . . . . 151 Safety notices (multi-lingu
Краткое содержание страницы № 7
Chapter 1. About this manual ® This manual contains service and reference information for IBM computer Types 8127, 8183, 8184, 8320, 8416, 8417, 8418, 8419 and 8429. This manual is divided into product service sections and a related service section, as follows: v The product service sections include procedures for isolating problems to a FRU, a Symptom-to-FRU Index, additional service information and an illustrated parts catalog. v The related service section includes safety notic
Краткое содержание страницы № 8
Leia todas as instruções de cuidado e perigo antes de executar qualquer operação. Lea atentamente todas las declaraciones de precaución y peligro ante de llevar a cabo cualquier operación. Strategy for Replacing FRUs for CTO, CMV, and GAV products Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configure an IBM solution from an eSite, and have this configuration sent to fulfillment, where it is built and shipped directly to the
Краткое содержание страницы № 9
v The MTM portion of the machine label is the 4-digit MT and 3-digit model, where model = ’CTO’ (Example: 1829-CTO). The PRODUCT ID portion of the machine label is the 4-digit MT and 3-digit CMV model (Example: 1829-W15). v The PEW record is the 4-digit MT and 3-digit model, where model = ’CTO’ (Example: 1829-CTO). v eSupport will show both the CTO and CMV machine type models (Example: 1829-CTO and 1829-W15 will be found on the eSupport site.) v The HMM will have the 4-digit MT
Краткое содержание страницы № 10
For the Remaining FRUs (the complete list of FRUs at the MT Model level) v eSupport can be used to view the complete list of FRUs for a machine type and model. v To view the complete list of FRUs, type in the machine type and model (Example: 1829-CTO) under QUICK PATH. Under ’View by Document Type’ select PARTS INFORMATION. Under ’Filter by Category’ select SERVICE PARTS. Under ’Parts Information by Date’ select SYSTEM SERVICE PARTS. The list of service parts by description, with ap
Краткое содержание страницы № 11
Chapter 2. General information Access IBM To find more information about the features on the computer you can use the Access IBM Predesktop Area. To open the Access IBM Predesktop Area, use the following procedure: 1. Shut down the operating system and turn off the computer. 2. Turn on the computer and look for the following prompt on the logo screen: (To interrupt normal startup, press Enter) Press Enter when you see the prompt. 3. The Access IBM Predesktop Area opens. Addition
Краткое содержание страницы № 12
Video subsystem An integrated Intel Extreme Graphics 2 controller for a Video Graphics Array (VGA) monitor Audio subsystem The integrated AC’97 audio controller provides four audio connectors. v Microphone and headphone connectors on the front panel v Line-in and line-out connectors on the rear panel Connectivity v 10/100 Mbps integrated Intel Ethernet controller that supports the Wake on ® LAN feature (some models) v 10/100/1000 Mbps integrated Intel Ethernet controller that
Краткое содержание страницы № 13
v User and administrator passwords v Support for the addition of a cable lock such as a Kensington lock v Knockout holes for installing a rope clip (U-bolt) v Optional keylock on top cover v Startup sequence control v Startup without diskette drive, keyboard, or mouse v Diskette and hard disk I/O control v Serial and parallel port I/O control v Security profile by device IBM preinstalled software The computer comes with preinstalled software. An operating system, devi
Краткое содержание страницы № 14
Operating systems (preinstalled) (varies by model) Note: Not all countries or regions will have these operating systems. ® ® v Microsoft Windows XP Home v Microsoft Windows XP Professional v Microsoft Windows 2000 8 Hardware Maintenance Manual
Краткое содержание страницы № 15
Specifications This section lists certain specifications for the computer. For the latest specification information, see the User Guide for the computer go to: http://www.ibm.com/pc/support/ Dimensions Airflow for computers with a microprocessor that runs at or below 2.8 GHz Width: 12.2 inches (310 mm) Approximately 13 cubic feet (0.37 cubic meters) per Height: 3.35 inches (85 mm) minute Depth: 14.1 inches (358 mm) Airflow for computers with a microprocessor that r
Краткое содержание страницы № 16
10 Hardware Maintenance Manual
Краткое содержание страницы № 17
Chapter 3. General Checkout This general checkout procedure is for Type 8127, 8183, 8184, 8320, 8416, 8417, 8418, 8419, and 8429 computers. Attention The drives in the computer you are servicing might have been rearranged or the drive startup sequence changed. Be extremely careful during write operations such as copying, saving or formatting. Data or programs can be overwritten if you select an incorrect drive. Diagnostic error messages appear when a test program finds a problem wi
Краткое содержание страницы № 18
v Readable instructions or the Main Menu. DID YOU RECEIVE THE CORRECT RESPONSE? If NO, continue to 002. If YES, proceed to 003. 002 If the Power Management feature is enabled, do the following: 1. Start the IBM Setup Utility program (see “Starting the IBM Setup Utility program” on page 19) 2. Select Power Management from the IBM Setup Utility program menu. 3. Select APM. 4. Be sure APM BIOS Mode is set to Disabled. If it is not, press Left Arrow (←) or Right Arrow (→)
Краткое содержание страницы № 19
Chapter 4. IBM Enhanced Diagnostics The IBM Enhanced Diagnostics program uses a full range of diagnostic utilities to determine the operating condition of the computer’s hardware components. You can run the IBM Enhanced Diagnostics from the Access IBM Predesktop Area on your hard disk. Alternatively, you can create a bootable IBM Enhanced Diagnostics diskette from the Access IBM Predesktop Area. You can also download the latest version of the Enhanced Diagnostics program from http://ww
Краткое содержание страницы № 20
1. Using the cursor movement keys, highlight Run Normal Test or Run Quick Test from the Diagnostics menu and then press Enter. This will automatically run a pre-defined group of tests from each test category. Run Normal Test runs a more extensive set of tests than does Run Quick Test and takes longer to execute. 2. Press F5 to automatically run all selected tests in all categories. See “Test selection.” 3. From within a test category, press Ctrl-Enter to automatically run only the
