Руководство по эксплуатации Vulcan-Hart ML-044938

Руководство по эксплуатации для устройства Vulcan-Hart ML-044938

Устройство: Vulcan-Hart ML-044938
Категория: Духовка
Производитель: Vulcan-Hart
Размер: 4.21 MB
Добавлено: 7/5/2014
Количество страниц: 52
Печатать инструкцию

Скачать

Как пользоваться?

Наша цель - обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства Vulcan-Hart ML-044938. Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с Vulcan-Hart ML-044938.

Для Вашего удобства

Если просмотр руководства Vulcan-Hart ML-044938 непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

  • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции Vulcan-Hart ML-044938 на полном экране, используйте кнопку Полный экран.
  • Скачивание на компьютер - Вы можете также скачать инструкцию Vulcan-Hart ML-044938 на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
Vulcan-Hart ML-044938 Руководство по эксплуатации - Online PDF
Advertisement
« Page 1 of 52 »
Advertisement
Печатная версия

Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше - Печатать инструкцию. Вам не обязательно печатать всю инструкцию Vulcan-Hart ML-044938 а только некоторые страницы. Берегите бумагу.

Резюме

Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для Vulcan-Hart ML-044938. Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

Краткое содержание
Краткое содержание страницы № 1

SERVICE AND
PARTS MANUAL
SIGNATURE SERIES
MODEL MODEL MODEL
OVEN STD IGNIT ML-044905 VSB36IR ML-044936 VIR35M ML-044961
STD OVEN ML-044906 ML-044937 VIR36FM ML-044962
CONV OVEN ML-044907 VRBS48 ML-044938 VCB25M ML-044963
VCB25S ML-044908 VRBS60 ML-044939 VCB36M ML-044964
VCB36S ML-044909 VRBS72 ML-044940 VCB47M ML-044965
VCB47S ML-044910 VRBS96 ML-044941 VCB36 ML-044966
VGF18 ML-044911 VRBR36 ML-044942 VCB36C ML-044967
VS12T ML-044912 VRBR48 ML-044943 ML-044968
VS12F ML-044913 VRBR60 ML-044944 M

Краткое содержание страницы № 2

© VULCAN-HART COMPANY, 2002 – 2 –

Краткое содержание страницы № 3

TABLE OF CONTENTS INTRODUCTION .................................................................................................................................................... 4 Service Notes ........................................................................................................................................... 4 Product Features and Descriptions .......................................................................................................... 4 UNCRATING/SETUP ...

Краткое содержание страницы № 4

INTRODUCTION Service Notes The information in this manual is not intended to be all inclusive, rather it is a guide to the applications, specifications and requirements of the Vulcan-Hart appliance. Vulcan-Hart appliances are not any different in concept, components or application than many other appliances. Vulcan-Hart appliances are designed to provide years of high performance. It is imperative that the installation requirements, operating guidelines and maintenance procedures be followed to

Краткое содержание страницы № 5

Product Features and Descriptions (Cont.) 1 SNORKEL CONVECTION OVEN - Rated at 30,000 BTU/hr. The interior dimension is 26 /4" wide x 23” deep and 14" high. The oven cavity is fully porcelainized. The door is also counterbalanced. Three oven racks are supplied and the rack guides have four positions. The thermostat is a “snap action” KX type with a temperature range of 1 200°F to 500°F degrees. There is a /4 HP fan motor that requires 115 Volt minimum 15 amp service. LEGS/CASTERS - Standard uni

Краткое содержание страницы № 6

UNCRATING/SETUP All Vulcan-Hart appliances are inspected and tested for function before leaving the factory. The transportation company assumes responsibility for safe delivery of the shipment. Should an appliance arrive with apparent and/ or hidden damage, see the freight damage section of this manual.  Uncrate the appliance; carefully remove all tie-down straps and packing material.  Locate and identify any and all loose pieces such as oven racks, rack guides, casters, legs, pressure regula

Краткое содержание страницы № 7

Installation Requirements (Cont.) All appliances must be vented to the outside. Depending on local codes, the specifics may vary. Check with local authorities. Fluing occurs because heat rises vertically, which has no force behind it. Any obstruction or disturbance will negatively affect the appliances ability to flue itself. Make up or fresh air should be present low and in the front of the appliance. Gas connector hoses shall be commercial grade and have the capability of supplying at least 10

Краткое содержание страницы № 8

GAS PRESSURE CHECK PROCEDURES Steps 1. Connect the manometer to the main gas manifold pipe of the appliance, or in a battery the center unit of the line up. If the pressure reading is taken at the oven burner or anywhere other than the main gas manifold pipe, the pressure drop can be 1" W.C. or greater and the test is invalid. 2. Fire up one burner and take a reading. 3. Fire up all the burners on the appliance and take a reading. 4. Fire up all the gas appliances on that supply line and take a

Краткое содержание страницы № 9

VENTILATION REQUIREMENTS Depending on local codes, ventilation requirements may vary. A basic formula is as follows: 100 to 150 CFM (cubic feet per minute) per square foot of floor space that the appliance or line up occupies. For example, one standard six burner unit, which measures 36" wide by 38" deep, equals approximately 9 square feet of floor space, therefore 900 to 1,350 CFM of exhaust is required. Units with charbroilers may require more CFM exhaust; check with local authorities. The hoo

Краткое содержание страницы № 10

PILOT ADJUSTMENTS After all connections/fittings have been checked for gas leaks and no leaks are found, the pilots can be lit. Locate each pilot and the corresponding pilot adjustment valve. Light the pilots and adjust them up or down as necessary. The flame should be only high enough to ignite the corresponding burner within 3 or 4 seconds maximum. Mushroom head-type pilots are used on open burners, griddles and hot tops. The flame should be only about the size of a dime. This type of pilot wi

Краткое содержание страницы № 11

BURNER ADJUSTMENTS When using natural gas, the air shutter will be approximately 50% open. On propane (LP) the air shutter will be approximately 90% open. If the flame is soft, lazy or yellow, there is not enough primary air and the air shutter needs to be opened up. In the event this does not solve the situation, check the burner for obstructions and clear as necessary. If the flame is lifting off the burner, there is too much primary air and the air shutter needs to be closed down (Diagram #5)

Краткое содержание страницы № 12

BATTERY INSTALLATION 1. Remove grates, hot tops, knobs, front manifold cover and bull nose (Diagram #6). 2. Slide open burners and/or hot tops off the orifice/valve, but do not remove them from burner box. It is not necessary to remove griddle burners unless the griddle plate is already off the unit. Be careful that the weight of the griddle burner or burners does not cause the manifold pipe to rotate when the manifold mounting clamps are loosened. 3. Loosen manifold mounting clamps enough that

Краткое содержание страницы № 13

DIAGRAM #6 DIAGRAM #7 – 13 –

Краткое содержание страницы № 14

DIAGRAM #8 – 14 –

Краткое содержание страницы № 15

THERMOSTATS The standard oven uses an FDTO-type, modulating thermostat. When first turned on, the flame comes on full 1 1 speed, approximately 1 /4" to 1 /2" tall. As the temperature approaches the set point, the flame slowly reduces 1 in size. When the temperature is achieved, the flame should be in bypass, approximately /8" tall. The bypass flame will keep the oven temperature constant unless the door is opened and heat is lost. When the oven needs to recover heat loss, the thermostat will al

Краткое содержание страницы № 16

CALIBRATION OF THERMOSTATS Field recalibration is very seldom necessary on new appliances, however older thermostats may require calibration. Recaibration should only be considered when cooking results definitely indicate the thermostat is not maintaining the set temperature. Before attempting recalibration, the temperature should should be checked with temperature test instrument or a reliable thermometer. Standard Oven with FDTO Thermostat 1. Place the test instrument sensor or thermometer in

Краткое содержание страницы № 17

Snorkel Oven and/or Electric Ignition Oven with KX Thermostat 1. Place the instrument sensor or thermometer in the center of the oven cavity and close the door. 2. Turn fan switch on. Set temperature dial to 300°F. Allow oven to cycle at least five times (approximately 15 minutes). If the temperature is more than 15°F different from the dial setting, calibrate as follows. A. Pull the dial straight off. Turn the calibration screw (Diagram #10) clockwise to decrease temperature 1 or counterclockw

Краткое содержание страницы № 18

Griddles with BJWA Thermostat Before attempting recalibration on the BJWA thermostat, a temperatures check must be done from a cold start, before the griddle has been idling and the temperature has had a chance to creep up. All temperature readings and/ or calibrations must be performed from a cold start. Thermostats can be rendered inoperative by improper calibration and/or adjustments.  Clean the griddle plate and make sure there is no carbon buildup on the cooking surface. Carbon buildup wil

Краткое содержание страницы № 19

DIAGRAM #11 DIAGRAM #12 BYPASS SCREW CALIBRATION SCREW – 19 –

Краткое содержание страницы № 20

OVEN ELECTRIC IGNITION SYSTEMS Spark System The spark system has had two different spark modules used. Until late 1993 a white Robert shaw SM2 module was used. This spark module was not polarity sensitive. Early 1994 the units have a blue technical components 0+1 spark module. The technical components spark module is polarity sensitive. When changing from Robert shaw to technical components, the polarity must be checked with a meter prior to connecting the module. NOTE: Do not rely on the origin


Скачавание инструкции
# Руководство по эксплуатации Категория Скачать
1 Vulcan-Hart 7016A1 ML-104495 Руководство по эксплуатации Духовка 1
2 Vulcan-Hart 7019A1 ML-104497 Руководство по эксплуатации Духовка 0
3 Vulcan-Hart 7066A1 ML-104496 Руководство по эксплуатации Духовка 0
4 Vulcan-Hart 7099A1 ML-104498 Руководство по эксплуатации Духовка 1
5 Vulcan-Hart 7888A1 ML-104493 Руководство по эксплуатации Духовка 1
6 Vulcan-Hart 7086A1 ML-104494 Руководство по эксплуатации Духовка 0
7 Vulcan-Hart 7098A1 ML-104501 Руководство по эксплуатации Духовка 0
8 Vulcan-Hart 7018A1 ML-104491 Руководство по эксплуатации Духовка 0
9 Vulcan-Hart 7988A1 ML-104502 Руководство по эксплуатации Духовка 0
10 Vulcan-Hart 7096A1 ML-104500 Руководство по эксплуатации Духовка 0
11 Vulcan-Hart 7998A1 ML-104503 Руководство по эксплуатации Духовка 0
12 Vulcan-Hart 7088A1 ML-104492 Руководство по эксплуатации Духовка 0
13 Vulcan-Hart 7999A1 ML-104499 Руководство по эксплуатации Духовка 0
14 Vulcan-Hart 9030A Руководство по эксплуатации Духовка 0
15 Vulcan-Hart ACB SERIES Руководство по эксплуатации Духовка 0
16 Edelbrock 17008 Руководство по эксплуатации Духовка 0
17 3Com Руководство по эксплуатации Духовка 1
18 ADIC 5.4 Руководство по эксплуатации Духовка 1
19 AEG BC3000001 Руководство по эксплуатации Духовка 527
20 AEG B3101-5-M Руководство по эксплуатации Духовка 328