Краткое содержание страницы № 1
KPS-SCC
SINGLE CABLE COLUMN
Questions?
Call our toll free Keys Fitness Helpline
1-800-683-1236
MANU AL
OWNER’S
Краткое содержание страницы № 2
THANK YOU for making this Power System unit a part of your exercise program. Keys Fitness and our Power System Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unn
Краткое содержание страницы № 3
BEFORE YOU START Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner’s r
Краткое содержание страницы № 4
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect the U Base (1) to the Middle Base (2) with Bolts (32), Washers (41) and Nylon Lock Nuts (42). STEP 2 Attach the Rear Upright (4) to the Rear Base (3) with bolts (31), Washers (41) and Nylon Lock Nuts (42). v
Краткое содержание страницы № 5
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Attach Middle Base (2) to Rear Base (3) with Bolts (32), Washers (41) and Nylon Lock Nuts (42). Insert Guide Rods (8) into Middle Base (2). Make sure that the threaded end of the Guide Rods points up. Slide Weight Bumbers (45) down to bottom of Guide Rods (8). Slide qty 9 of the 10 lb plates (27) onto the guide rods. Slide qty 10 of the 5 lb plates (28) onto the guide rods. Slide selector rod assembly ont
Краткое содержание страницы № 6
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Attach Slide Frame (6) onto Middle Base (2) with bolt (31), Washers (41) and Nylon Lock Nut (42). Place Slide Frame (6) over Guide Upright (5) and secure with Pop Pin. Attach Top Frame (7) to Guide Upright (5), Guide Rods (8) and Rear Upright (4) as shown. x
Краткое содержание страницы № 7
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 5 Complete Cable (11) and Pulley assembly as shown. y
Краткое содержание страницы № 8
ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 6 Attach Shrouds to frame using Allen Bolts (38) and Washers (40). z
Краткое содержание страницы № 9
PARTS LIST # DESCRIPTION QTY 1 "U" base 1 2 middle base 1 3 rear base 1 4 rear upright 1 5 guide upright 1 6 slide frame 1 7 top frame 1 8 guide rod 2 9 weight shroud 2 10 double pulley block 1 11 cable 1 12 swing pulley block 1 13 select rod 1 14 jam nut 1 15 pop Pin 1 16 big pulley 114 5 17 small pulley 89 3 18 lat strap 1 19 ankle strap 1 20 end cap 50.8 4 21 guide sleeve 63.5x?50.8 2 22 plug 50.8x76.2 1 23 plug 25 1 24 grip 1 25 gear hook 8 1 26 top plate 1 27 weight plate 10LBS 9 28 weight
Краткое содержание страницы № 10
EXPLODED VIEW
Краткое содержание страницы № 11
KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the origi- nal purchaser is lifetime of the original purchaser. Keys warrants that the Product you have purchased for non-commercial, personal, family, or househould use from Keys or from an authorized Keys reseller is free from defects in materials o
Краткое содержание страницы № 12
Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236
