Краткое содержание страницы № 1
s
C2-010/C2-010-I ADSL2+
Router
User’s Manual
Rev: 1.3
2005/1210
No part of this publication may be reproduced in any form by any means without the
prior written permission. Other trademarks or brand names mentioned herein are
trademarks or registered trademarks of their respective companies.
This manual currently suits for C2-010/C2-010-I.
Краткое содержание страницы № 2
Краткое содержание страницы № 3
C2-010 / C2-010-I ADSL2+ Router User’s Guide Contents 1.1 Device Introduction....................................................................................................................... 1-1 1.2 Features........................................................................................................................................ 1-1 2.1 Packing List .............................................................................................................................
Краткое содержание страницы № 4
C2-010 / C2-010-I ADSL2+ Router User’s Guide 6.3 Save ADSL2+ Router Configuration Settings............................................................................... 6-2 6.4 Restore Factory Default Settings.................................................................................................. 6-3 6.5 Save Configuration File to PC ...................................................................................................... 6-3 6.6 Load Saved Configuration Files .......
Краткое содержание страницы № 5
C2-010 / C2-010-I ADSL2+ Router User’s Guide 1. Overview The ADSL2+ Router provides integrated voice and data services over ADSL “Asymmetrical Digital Subscriber Loop” WAN (Wide Area Network) connection. 1.1 Device Introduction The ADSL2+ Router is designed to provide a simple and cost-effective ADSL Internet connection for individual computers through the Ethernet ports, or use it to bridge your Ethernet LAN to the Internet. The ADSL2+ Router combines the benefits of high-speed ADSL t
Краткое содержание страницы № 6
Краткое содержание страницы № 7
C2-010 / C2-010-I ADSL2+ Router User’s Guide 2. Installation Planning Before installing the ADSL2+ Router, you should gather information and equipment needed to install the device, then Install the hardware as instructed, connect the cables to the device and power on the ADSL2+ Router. Prior to accessing the web-based software built into the ADSL2+ Router, you should check the IP settings on your computer and change them if necessary. 2.1 Packing List Please check the package contents
Краткое содержание страницы № 8
C2-010 / C2-010-I ADSL2+ Router User’s Guide 2.2.2 Rear Panel Ethernet port Power input − − to your ADSL port − Connect power PC’s Connect to the Ethernet port adapter here ADSL line Factory Reset Button Figure 2-2 Rear Panel 2.3 Cable Connections After verifying proper environmental conditions such as temperature, humidity and power supply, users may start the cable connections as following. 2.3.1 Connecting the ADSL Line Use the ADSL cable included with the
Краткое содержание страницы № 9
ADSL2+ Router User’s Guide 2.3.3 Computer to ADSL2+ Router Connection Cat 5 Ethernet Cable Figure 2-3 Computer to ADSL2+ Router Connection You can connect the ADSL2+ Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using the Ethernet cable provided as shown in this diagram. 2-3
Краткое содержание страницы № 10
C2-010 / C2-010-I ADSL2+ Router User’s Guide 2.3.4 Hub or Switch to ADSL2+ Router Connection Connect the ADSL2+ Router to an uplink port on an Ethernet hub or switch with a straight-through cable as shown in the diagram below: Figure2-5 Hub/Switch to ADSL2+ Router Connection If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable. 2.4 Power on 1) To power on the ADSL2+ Router, pleas
Краткое содержание страницы № 11
C2-010 / C2-010-I ADSL2+ Router User’s Guide 3. Before Configuring ADSL2+ Router The factory default settings of ADSL2+ Router optimized all functions so as to enable it to operate on most network conditions. Usually, for the users with simple network topology, the default settings can meet the basic requirements and don’t need to change. In order to access the web-based software built into the ADSL2+ Router, you should check the IP settings on your computer and change them if necessary t
Краткое содержание страницы № 12
C2-010 / C2-010-I ADSL2+ Router User’s Guide 3.4 First Time Log on After inputting the forgoing IP address on URL address bar, a new window appears prompting you for a user name and password needed to gain access the web configuration manager. Figure 3-1. Log On Interface Use the default system user name: admin and password: admin for first time set up. You can change the password once you have established the ADSL connection. The user name and password allows any computer on the same
Краткое содержание страницы № 13
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4. Web-based Management 4.1 Summary When you successfully login the Basic directory will display the ADSL2+ Router’s current connection status − both for the WAN (Internet) and LAN (your home network) connections, as shown below. You can begin the process of configuring your ADSL modem/ADSL2+ Router by clicking on the Advanced button in the upper left-hand corner of the first Web page displayed. This will open the Wizard page, as shown below.
Краткое содержание страницы № 14
C2-010 / C2-010-I ADSL2+ Router User’s Guide Each tab displays menu buttons located in the left hand panel of the web interface. The table below lists the menus for each directory in the web manager. Directory Configuration and Read-only Menus Home Click the Home tab to access the Summary, WAN, DHCP, DNS, and LAN Configuration menus. Advanced Click the Advanced tab to access the Virtual Server, Application, Filter, Firewall, NAT, DDNS, and RIP menus. Tools Click the Tools tab to
Краткое содержание страницы № 15
ADSL2+ Router User’s Guide Figure 4-3 WAN Current Settings Menu Select the connection type used for your account. The menu will display settings that are appropriate for the connection type you select. Follow the instruction below according to the type of connection you select in the WAN Settings menu. Your Internet Service Provider (ISP) should provide the information you need to select the proper connection type. To configure the Router’s basic configuration settings without running t
Краткое содержание страницы № 16
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4.2.1 Configuring a Bridged Connection for the WAN A bridged connection between your ISP and your LAN (the computers in your house or office) is the simplest type of connection possible. The ADSL2+ Router will simply convert the incoming and outgoing packets to the correct format for each side of the connection (Ethernet for the LAN, ATM for the WAN). For a bridged connection it will be necessary for most users to install additional software (s
Краткое содержание страницы № 17
ADSL2+ Router User’s Guide 4. When you are satisfied that all the WAN settings are configured correctly, click on the Apply button. Note: Some accounts use PPP connection software for their Internet service connection. If you have been given a CD with PPP connection software, install this now as instructed by your service provider. After the ADSL2+ Router has rebooted it will negotiate the ADSL connection. Use the connection software to log on to the ISP network and access the Internet. 4
Краткое содержание страницы № 18
C2-010 / C2-010-I ADSL2+ Router User’s Guide 3. Under the Static IP heading, choose the Connection Type from the pull-down menu. This defines both the connection type and encapsulation method used for your ADSL service. The available options are Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, Routed IP VC-MUX or IPoA.. If have not been provided specific information for the Connection Type setting, leave the default setting. 4. Change the IP Address, Subnet Mask, Gateway Address and (if av
Краткое содержание страницы № 19
ADSL2+ Router User’s Guide Route NAT Enabled/Disabled − this enables or disables NAT (Network Address Translation) on the router. This should normally be enabled. IGMP Enabled/Disabled − this enables or disables IGMP (Internet Group Management Protocol) on the router. This should normally be enabled. 4-7
Краткое содержание страницы № 20
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4.2.3 Dynamic IP Address Connection for WAN A Dynamic IP Address connection configures the Router to automatically obtain its global IP address from a DHCP server on the ISP’s network. The service provider assigns a global IP address from a pool of addresses available to the service provider. Typically the IP address assigned has a long lease time, so it will likely be the same address each time the Router requests an IP address. To configure
