Краткое содержание страницы № 1
ADSL2+
Full-Rated Router
User’s Manual
Sept 2006
Краткое содержание страницы № 2
Copyright Copyright © 2004 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. Disclaimer This company makes no representations or warranties, either expressed or implied, with respect t
Краткое содержание страницы № 3
Contents 1. Introduction................................................................................................5 1.1 System Requirements ................................................................................ 5 1.2 Package Contents....................................................................................... 5 2. Product Features .......................................................................................5 2.1 ADSL Compliant ..........................
Краткое содержание страницы № 4
5.4.3 PPP....................................................................................................... 48 5.4.4 EDA ...................................................................................................... 50 5.4.5 IPOA ..................................................................................................... 52 5.5 Bridging..................................................................................................... 53 5.5.1 Bridging ................
Краткое содержание страницы № 5
5.8.9 Backup/Restore Configuration.......................................................... 96 5.8.10 Management Control .......................................................................... 98 5.8.11 Autodetect...........................................................................................99 5.8.12 SNMP Configuration......................................................................... 100 5.8.13 Parental Control ..........................................................
Краткое содержание страницы № 6
1. Introduction This ADSL2+ Ethernet router is a full-featured ADSL router that provides high-speed Internet access and Ethernet direct connections to individual PCs or local area network with 10/100 Base-T Ethernet. This ADSL2+ router uses advanced ADSL chipset solution with complete set of industry standard features and high-speed ADSL, ADSL2 and ADSL2+ network solution for SOHO and residential users. User can enjoy higher quality multimedia
Краткое содержание страницы № 7
ITU-T G.992.5 (ADSL2+) Reach Extended ADSL (RE ADSL) Auto-negotiating rate adaptation 2.2 ATM Protocols and Encapsulations ATM Forum UNI 3.1 / 4.0 PVC Support up to 8 VCs (Virtual Circuit) ATM SAR (Segmentation and Reassembly) Traffic Shaping UBR, CBR, VBR-nrt Multi Protocol over AAL5 (RFC1483 / 2684) RFC 1577 (Classical IP over ATM) VC and LLC Multiplexing VPI is 0-255 and VCI is 32-65535 OAM F4 and F5 segment end-to-end loopback 2.3 PPP Support PPP over Etherne
Краткое содержание страницы № 8
CHAP (Challenge Authentication Protocol; RFC1994) User authentication for PPP Password Protected System Management Firewall 2.7 Device management Firmware upgrade via FTP / TFTP (Web-based) SNMP MIB Support WAN and LAN connection statistics Selection of Bridge or Router Mode Configuration of VCs (Virtual Circuits) 2.8 Interface Compliant with USB v1.1, full speed (12Mbps) One or Four RJ45 port compatible with IEEE 802.3/802.3u, 10/100Mbps auto selection One RJ11 p
Краткое содержание страницы № 9
3. Hardware Indicators and Connectors 3.1 Front Panel Indicators and Description Front panel of ADSL router has LED indicators to display router’s operating status. Single-Port ADSL Router ○ ○ ○ ○ ○ ADSL DATA LAN USB PWR Descriptions of LED status When connection with Internet (ADSL Connected) is established, this LED will light up. ADSL When this LED is flashing: NO ADSL physical connection DATA When router
Краткое содержание страницы № 10
3.2 Back Panel Single-Port ADSL Router LINE USB LAN PWR DEFAULT Descriptions of All Connectors LINE Connect with telephone line. USB Connect with USB cable. LAN Connect with Ethernet Cable to Switch Hub or PC PWR Connect with power adapter DEFAULT Reset button. Four-Port ADSL Router LINE USB 1X 2X 3X 4X PWR DEFAULT D
Краткое содержание страницы № 11
3) Connect Router to Power Adapter Plug power adapter to PWR port on the back panel of the router and the other end to a power outlet. The diagram below illustrates a connection example, Warning! Only use the power adapter provided in the package, otherwise it may cause hardware damage. 10
Краткое содержание страницы № 12
4. Connecting ADSL Router via Ethernet and USB You can connect this ADSL Router with PC through Ethernet cable or USB cable. After connect is established, you can configure the host PC to be a DHCP client. You have to repeat the same steps for every host PC on your network if you user DHCP function on your router. 4.1 Setup ADSL router via Ethernet Cable If there is an available LAN card present on your PC, you just simply connect ADSL router and PC through the Ethernet ca
Краткое содержание страницы № 13
Step 3: Insert “Easy Setup” Software kit CD, and then click “Install USB Driver” to begin device driver installation. Step 4: After “DSL Modem Setup Wizard” shows, click “Next” to continue. 12
Краткое содержание страницы № 14
Step 5: Please review the following license agreement, and click “Accept” to continue. Step 6: Waiting for few seconds for device driver installation. 13
Краткое содержание страницы № 15
Step 7: For completing your installation, the DSL Modem Setup Wizard requires to reboot your system. Please choose “Yes, reboot the computer now” and click “Close” for reboot. Step 8: After you restart your computer, you can see Finish windows. Click “Finish” to compete the installation. 14
Краткое содержание страницы № 16
Step 9: Follow the procedures below to check if DSL router is properly installed. Right-click “My Computer” on the desktop Choose “Properties” Select “Hardware” tab Click “Device Manager” button. 4.3 TCP/IP Configuration For Windows XP Step 1: Click Start and then select Control Panel in the main window screen. 15
Краткое содержание страницы № 17
Step 2: Double-Click Network Connections icon. Step 3: Right-click Local Area Connection (local network your ADSL hooked up with) and then select “Properties”. 16
Краткое содержание страницы № 18
Step 4: Select Internet Protocol (TCP/IP) then click “Properties”. Configure IP address Automatically: Step 5: Select Obtain an IP address automatically & Obtain DNS server address automatically. 17
Краткое содержание страницы № 19
Configure IP address Manually: Step 5: Select Use the following IP address & Use the following DNS server addresses. IP address: Fill in IP address 192.168.1.x. (x is a number between 3 to 254). Subnet Mask: Default value is 255.255.255.0. USB interface Default gateway: Default value is 192.168.1.2. Ethernet interface Default gateway: Default value is 192.168.1.1 Preferred DNS server: Fill in preferred DNS server IP address. Alternate DNS server: Fill in alternate DNS server IP a
Краткое содержание страницы № 20
If the communication link between your computer and router is not setup correctly, after your type ping 192.168.1.2 under DOS prompt following message will appear. Pinging 192.168.1.2 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. This failure might be caused by cable issue or something wrong in configuration procedure. For Windows 2000 Step 1: Right-click My Network Places and select Properties in the main windows
