Краткое содержание страницы № 1
IE-iMcV-MultiWay
Operation Manual
Краткое содержание страницы № 2
FCC Radio Frequency Interference Statement Class A (using 48V Telco type power) This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the inst
Краткое содержание страницы № 3
Table of Contents FCC Radio Frequency Interference Statement ........................................................... ii Warranty................................................................................................................... ii About the IE-iMcV-MultiWay ....................................................................................1 Operations, Administration and Maintenance (OAM)........................................3 About iView² Management Software ........
Краткое содержание страницы № 4
RS-232 Serial Console Port..............................................................................45 Product Applications ...............................................................................................46 Glossary ..................................................................................................................47 Troubleshooting ......................................................................................................49 Specifications.........
Краткое содержание страницы № 5
About the IE-iMcV-MultiWay The IE-iMcV-MultiWay is a CPE device, available as a modular device providing two fixed 10/100/1000Base-T copper ports and 2 SFP ports. The SFP ports support fiber or copper SFPs. As a plug and play device, the IE-iMcV-MultiWay provides several distinct modes of operation to support a wide range of applications. The IE-iMcV- MultiWay provides OAM functionality with 802.3ah and 802.1ag supported on each port. It also supports jumbo frame sizes of up to 10,24
Краткое содержание страницы № 6
About IE-iMcV-MultiWay Features and Configuration The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation, Selective Advertising, AutoCross, VLANs, SNMP management, loopback testing and OAM. Unit 2 software updates can be downloaded through TFTP or iView (iConfig view). IE-iMcV-MultiWay features include: • SNMP manageable • OAM AH o IEEE 802.3ah Link OAM for per port monitoring (OAM AH) • OAM AH Functions o Discovery o Link Performance Monitoring o Remote Loopback
Краткое содержание страницы № 7
2 When using iView , the IE-iMcV-MultiWay can be fully managed without an IP address using a secure management channel. However, an IP address can be assigned through iView2 (iConfig view), the CLI or Telnet using the default IP address of 10.10.10.10. Operations, Administration and Maintenance (OAM) OAM is a general term used in network management and is typically applied to a series of standard protocols for installing, monitoring, and troubleshooting Metropolitan Area Networks. Whe
Краткое содержание страницы № 8
2 About iView (iConfig view) 2 iView (iConfig view) is an in-band utility created by IMC Networks, used for SNMP configuration for IMC Networks’ SNMP-manageable devices. 2 The iView (iConfig view) feature allows the following to be performed: • Set an IP address, subnet mask and default gateway • Define community strings and SNMP traps 2 iView (iConfig view) also includes an authorized IP address system and restricted access to MIB groups which are supported by IMC Networks’ manageabl
Краткое содержание страницы № 9
DIP Switch Selectable Mode Configuration The IE-iMcV-MultiWay can be configured in one of the following ways via DIP Switch settings (see page 6): Configuration Description Method 4-Port Switch In this mode, the unit acts as a standard 4-port MAC-layer switch. (default) Dual Converter In this mode, the unit functions as two independent (SFP to TX) mode media converters and traffic never passes between the two converters. 1+1 SFP In this mode, the "SFP A" port (fiber or copper)
Краткое содержание страницы № 10
DIP Switch configuration DIP Name Description Default Switch Setting 1 Dual Enable dual channel OFF 2 1+1 Provides 1+1 protection with non-revertive switching OFF 3 1+1 Revert Provides 1+1 protection with revertive switching OFF 4 LoSpd B Force SFP "B" for low-speed operation OFF 5 LoSpd A Force SFP "A" for low-speed operation OFF 6 Reserved Mini-Serial Port Included with the IE-iMcV-MultiWay is a serial port adapter for configuration. A standard AC mini-jack on the
Краткое содержание страницы № 11
LED Operation Each IE-iMcV-MultiWay includes SFP and RJ-45 LEDs. (TX 1, TX 2) LNK/ACT Glows green when a link is established on the TX port; blinks green when activity is detected on the TX port. FDX Glows yellow when a link is established on the TX port; blinks green when activity is detected on the TX port. SFP A, SFP B OAM Glows green when an active OAM AH channel is established. ACTIVE Glows green when the port is active OFF when SFP is in standby
Краткое содержание страницы № 12
Configuration The IE-iMcV-MultiWay includes many features that are configurable via a serial/Telnet session (CLI) or through iView² (SNMP Management view or iConfig view). Configuration Options 2 The following options are configurable through both the iView (iConfig view) and Serial/Telnet. Feature iView² Serial/Telnet Loopback Auto Negotiation Force Mode FlowControl VLANs IP Address Subnet Mask Default Gateway MIB Community Traps Assignment U
Краткое содержание страницы № 13
Basic Device Configuration Using the CLI After running through an initial self test, the screen will display the following message: Press Enter for Device Configuration. Press Enter to open the main configuration screen. This screen allows the user to set the IP address and the destination IP address for traps with the community string, read/write access and password as usual. Saved Values. (These values will be active after reboot) IP Address - 10.10.10.10 Subn
Краткое содержание страницы № 14
This screen contains the following information and options: Saved and Current Values Saved values display the changes made during the current session and current values display the values currently in use: � IP Address (IP address of SNMP agent) � Subnet Mask (mask to define IP subnet to which agent is connected) � Default Gateway (default router for IP traffic outside of the subnet) Command List I = Enter new Saved Parameter Values P = Change the Password* T = Enter new Trap Destin
Краткое содержание страницы № 15
sensitive and must not exceed eight characters or include spaces, and press Enter. This password will be requested whenever logging on. To remove password protection, select P and, instead of entering a password, press Enter. Passwords have the following requirements: The password must be between 1 and 8 characters long � � The password consists of a combination of any ASCII characters except spaces � Passwords are case sensitive Passwords are a way to make the management of the IMC
Краткое содержание страницы № 16
Deleting Community Strings To delete all community strings, perform the following: Press U. The "Are you sure you want to delete all future strings?" prompt is displayed. Press Y when prompted to proceed and delete all community strings, N to abort. Press Enter to finish. This function will delete ALL community strings. To selectively delete community 2 strings, use iView (iConfig view) to configure the device. Ending the Session Press E to end a serial port or Telnet/HyperTerminal
Краткое содержание страницы № 17
DHCP Disable (Static IP Addressing) DHCP is disabled in the default configuration. Initially, modules are assigned a Static default IP Address of 10.10.10.10. Changes to the Static IP Address can be added 2 manually through iView (iConfig view) or a Console session. The changes will be initiated following reboot of the module. DHCP Enable (Dynamic IP Addressing) If a DHCP server is present on the network and DHCP is enabled, the DHCP client will initiate a dialogue with the server dur
Краткое содержание страницы № 18
Commands List (Space Bar) The IE-iMcV-MultiWay also includes several device-specific options. To access these options, press the Space Bar from the Main Configuration screen, type the name of Enter. the action to be performed (as shown below) and press Command Description cleandb Reboots the unit with a clean database. This removes all information from the database and sets the unit to factory defaults. download Downloads firmware via the TFTP protocol. accounts Allows the addition
Краткое содержание страницы № 19
Command Description unit Unit global settings, frame size selection. Unit OAM enable must be enabled for AH and AG to function. port Displays the port status and allows changes to port settings, such as duplex status and speed. Cleandb Entering cleandb reboots the unit with its database cleaned depending on the option selected. Users are presented with two, sequential options, first to reset all SNMP settings and, second, to reset all of the unit’s configuration to default. Enabling
Краткое содержание страницы № 20
After the transfer process is complete, press Enter to load the configuration file: Once loaded into the device's SNMP memory area, the system prompts the user to reboot the device to make the new configuration active. 16
