Краткое содержание страницы № 1
BiPAC 7300GX
3G/ ADSL2+ Wireless Router
User’s Manual
Краткое содержание страницы № 2
Table of Contents Chapter 1 ................................................................................................ 3 1.1 Introducing the BiPAC 7300GX ............................................. 3 1.2 Features................................................................................. 5 1.3 Applications of the BiPAC 7300GX ........................................ 8 Chapter 2 ................................................................................................ 9
Краткое содержание страницы № 3
5.5 Restart ............................................................................... 122 5.6 Logout................................................................................ 123 Chapter 6 ............................................................................................ 124 2
Краткое содержание страницы № 4
Chapter 1 Introduction 1.1 Introducing the BiPAC 7300GX Thank you for purchasing the BiPAC 7300GX ADSL2+ Router by Billion. Your new router is an all-in-one unit that combines an ADSL modem, ADSL2/2+ router , PC card slot for 3G/HSDPA data card and Ethernet network switch to provide everything you need to get the machines on your network connected to the Internet over an ADSL broadband connection. The BiPAC 7300GX router complies with ADSL2+ standards for deployment worldwide and supp
Краткое содержание страницы № 5
internal users from accessing the Internet. The BiPAC 7300GX provides two levels of security support. First, it masks LAN IP addresses making them invisible to outside users on the Internet, so it is much more difficult for a hacker to target a machine on your network. Second, it can block and redirect certain ports to limit the services that outside users can access. To ensure that games and other Internet applications run properly, you can open specific ports for outside users to access
Краткое содержание страницы № 6
1.2 Features Express Internet Access – ADSL2/2+ capable The BiPAC 7300GX complies with ADSL worldwide standards. Supporting downstream rates of 8Mbps with ADSL, the router is capable of up to 12/24 Mbps with ADSL2/2+, and upstream rates of up to 1 Mbps. Users enjoy not only high-speed ADSL services but also broadband multimedia applications such as interactive gaming, video streaming and real-time audio which are easier and faster than ever. The router is compliant with Multi-Mode standa
Краткое содержание страницы № 7
Universal Plug and Play (UPnP) and UPnP NAT Traversal This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors, and it makes setting up a network simple and affordable. UPnP architecture leverages TCP/IP and the Web to enable proximity networking in addition to control and data transfer among networked devices. With this feature enabled, you can seamlessly connect to Net Meeting or MSN Messenger. Network Address Transl
Краткое содержание страницы № 8
Quality of Service (QoS) QoS gives you full control over which types of outgoing data traffic should be given priority by the router, ensuring important data like gaming packets, customer information, or management information move through the router ay lightning speed, even under heavy load. The QoS features are configurable by Internal IP address, External IP address, protocol, and port. You can throttle the speed at which different types of outgoing data pass through the router, to ens
Краткое содержание страницы № 9
1.3 Applications of the BiPAC 7300GX 8
Краткое содержание страницы № 10
Chapter 2 Product Overview Standards-Based Technology The BiPAC 7300GX Wireless Router utilizes the 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54Mbps* within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays. This
Краткое содержание страницы № 11
(at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate extreme RF (radio frequency) noise. 2.1 Important Notes Do not use the BiPAC 7300GX in high humidity or high temperatures. Do not use the same power source for the BiPAC 7300GX as other equipment. Do not open or repair the case yourself. If the BiPAC 7300GX Warning is too hot, turn off the power immediately and have it repaired at a qualified service center. Avoid using this pro
Краткое содержание страницы № 12
2.3 The Front LEDs LED Description Lights Green when the power and router system are ready. Flickering Green when system is booting or system 5 Power upgrade. Lights Red when device can not boot successfully. Lights off means power off. 6 3G Lights when 3G service is ready. Lights Green when the wireless connection is established. 7 WLAN Flashes when sending/receiving data. Steady glow when connected to an Ethernet device. Ethernet 8-11 Glows green for 100Mbps; Orange
Краткое содержание страницы № 13
2.4 The Rear Ports 8 7 6 2 4 3 1 5 Port Description Power 1 Power ON/OFF switch. Switch 2 Power Connect the supplied power adapter to this jack. 3G card 3 Connect the 3G card bus data card to this slot slot After the router is powered on, press this reset button using the end of paper clip or other small pointed object to reset the router and to restore it to factory default settings. 4 Reset 1. Recovery procedures for non-working routers (e.g. after a failed firmware upg
Краткое содержание страницы № 14
The detail instruction in Reset Button 1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash): Hold the Reset Button on the back of the modem in. Keep this button held in and turn on the modem. Once the lights on the modem have stopped flashing, release the Reset Button. The modem's emergency-reflash web interface will then be accessible via http://192.168.0.254 where you can upload a firmware image to restore the modem to a functional state. Please n
Краткое содержание страницы № 15
2.5 Cabling One of the most common causes of problems is because of bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables. Ensure that all other devices connected to the same telephone line as your Billion router (e.g. telephones, fax machines, analog modems) have a line filter connected between them a
Краткое содержание страницы № 16
Chapter 3 Installation You can configure the BiPAC 7300GX router through the convenient and user-friendly interface of a web browser. Most popular operating systems such as Linux and Windows 98/NT/2000/XP/Me include a web browser as a standard application. 3.1 Before Configuration PCs must have a properly installed Ethernet interface which connects to the router directly or through an external repeater hub. In addition, PCs must have TCP/IP installed and configured to obtain an I
Краткое содержание страницы № 17
Configuring a PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 16
Краткое содержание страницы № 18
Configuring a PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 17
Краткое содержание страницы № 19
Configuring PC in Windows 98/Me 1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2.Select TCP/IP ->NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3.Select the Obtain an IP address automatically radio button. 4.Then select the DNS Configuration tab. 5.Select the Disable DNS radio button and click OK to finish the configuration. 18
Краткое содержание страницы № 20
Configuring PC in Windows NT4.0 1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2.Select TCP/IP Protocol and click Properties. 3.Select the Obtain an IP address from a DHCP server radio button and click OK. 19
