Краткое содержание страницы № 4
Product Introduction WLBARGO Manual 1 Corega WLBARGO is a 54M wireless broadband Router with IEEE802.11g wireless access point standard. It supports TX-burst technology which can effectively improve the transmit speed. It also contains 5 dBi detachable antenna which can maximum transmit length up to 500m. Moreover, WLBARGO supports security settings such as WEP, WPA and WPA2. WDS and WMM functions are also support- ed. With extensive functions and superior efficiency, WLBARGO is the best ch
Краткое содержание страницы № 5
WLBARGO Manual 1.3 Hardware Introduction 8 9 1 2 3 4 5 1 0 6 7 1 1 1. Reset Button 7. Link LED (Green) Press this button it will reset to ON:Connected default setting Blink:Transmitting or receiving data 2. WLAN LED (Green) ON:Connected 8. Detachable Antenna Connector 3. Power LED (Green) Indicate power status 9. WAN port Connected with modem 4.Status LED (Orange) Steady on: Abnormal 10. LAN ports(1-4) Blink:Connected Connected with
Краткое содержание страницы № 6
Product Installation WLBARGO Manual 2 2.1 Hardware Installation Following the steps below to set up WLBARGO and the connection. (1) Insert the cable connector into the Network Adapter embeded in PC, and insert the other side into one of LAN ports (1~4) of the Router. (2) Insert the connect into the WAN port of the Router and insert the other side into the modem. (3) Connect the Power Adapter, and plug in the AC power. W AN L A N M o de m c o r e g a W LB AR G O P C 2.2 Installation Procedure
Краткое содержание страницы № 7
WLBARGO M PC S anualetting 3 3.1 TCP/IP Configuration The following steps and screenshots maybe dissimilar in different operat- ing systems. This manual takes Windows XP/2000, 95/98/ME, and Mac O/S as examples: 3.1.1 Windows XP O/S (1) Enter [Control Panel] -> click [Network Connection] -> right click and select [Open]. (2) Click [Local Area Connection] and right click and select [Properties]. 6 6 6 7 7 7
Краткое содержание страницы № 8
WLBARGO Manual (3) Click [General] -> click [Internet Protocol (TCP/IP), and click [Properties]. (4) Click [General], select [Obtain an IP Address Automatically], and [Obtain DNS Server address automatically], and press [Advance]. 6 6 6 7 7 7
Краткое содержание страницы № 9
WLBARGO Manual (5) Click [DNS] tab, unselect [Register this connection’s address in DNS], and press [OK]. (6) Go back to [Internet Protocol TCP/IP] and press [OK]. (7) Press [OK] to close [Local Area Connection Properties]. 3.1.2 Windows 2000 O/S (1) Go to [My Computer], and enter [Control Panel], click open [Network and Dial Up Connections]. 8 8 9 9
Краткое содержание страницы № 10
WLBARGO Manual (2) Right click [Local Area Connection], and select [Properties] *Note: Please check if TCP/IP had been installed in the [Local Area Connection]. (3) Click [Internet protocol (TCP/IP)] and click [Properties]. 8 8 9 9
Краткое содержание страницы № 11
WLBARGO Manual (4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Click [DNS] tab in [Advance TCP/IP setting] page, and unselect [Register this connection’s DNS address, and press [OK]. (6) Please close all pages. 10 10 11 11
Краткое содержание страницы № 12
WLBARGO Manual 3.1.3 Windows 98/95/ME O/S The configurations in all Windows 98/95/ME are the same, and this manual takes Windows 98 as an example. (1) Enter [Control Panel], and double click [Network]. (2) Click [Configuration] tab, and select [TCP/IP], click [Properties]. (3) Select [IP Address], and select [Obtain IP address automatically. Press [OK]. 10 10 11 11
Краткое содержание страницы № 13
WLBARGO Manual (4) Click [Gateway] tab, remove all the gateways, and press [OK] to close the window. (5) Go to [Network] and press [OK] to close the page. (6) The [Restart the windows] screen will pop-up, press [OK] to restart the PC. If the PC is not shown this message, restart the PC manually. 3.1.4 Mac OS 8.x~9.x O/S (1) Open the [TCP/IP] configuration from [Control Panel]. (2) Select [Ethernet Network] in the [connection methods]; select [DHCP server] in [Configuration], and close this page
Краткое содержание страницы № 14
WLBARGO Manual 3.2 Browser Configuration 3.2.1 Windows O/S The following examples are for Windows XP O/S, skip this chapter if you are using Windows 2000/98/ME. (1) Open Internet Explorer (IE 6.0), select [Tools] menu and click [Internet Options]. If a [Dial-up Connection] window is pop-up, close it, and do not connect to the Internet now. (2) Click [Connections] tab -> select [Never dial a connection] -> click [LAN Settings]. 12 12 13 13
Краткое содержание страницы № 15
WLBARGO Manual (3) Unselect all three options in the [Local Area Network LAN Setting]. (4) Press [OK] in the [Internet Options]. 3.2.2 Mac O/S (1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar, select [Internet Explorer Preferences]. (2) Select [Proxies] options in [Network] on the left-side configuration items. (3) Do not select [Web Proxy], press [OK]. 14 14 14 15 15 15
Краткое содержание страницы № 16
Network Configuration WLBARGO Manual 4 4.1 Quick Network Configuration Basic configuration is required before connection your computer to the inter- net via WLBARGO. The connection methods may be differed by your contract to the ISP. Please reconfirm your connection conditions with your ISP prior to configure this router. The configuration procedures are as follow: *Note: Anti-virus or Firewall software may prevent this router from being set-up properly. Please close such software through out
Краткое содержание страницы № 17
WLBARGO Manual (5) Click [Quick Installation Setting]. (6) When seeing this screen shot, click on [Next]. (7) Select your connection type. Please make sure that your ADSL connection type is correct as you enter; the correct information can be obtained from the documents given by your ISP. If not, consult with your ISP before setting. 4.1.1 Auto obtain IP (DHCP) 16 16 17 17
Краткое содержание страницы № 18
WLBARGO Manual (1) If you are subscribing to auto obtain IP service ( or DHCP Dynamic IP) from your ISP, such as Cable Modem that obtain an IP automatically for connection, please select [Auto obtain IP(DHCP)]. Click on [Next]. (2) Press [MAC address clone] to obtain the Ethernet card’s MAC address. Then press [Next]. (3) Click on [Save] to perform connection tests. 16 16 17 17
Краткое содержание страницы № 19
WLBARGO Manual (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the connection status. When [Connection ok] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any website for testing the connection. * Note: if the connection to the website fails. Restart your Cable Modem, and check the installation of CG-WLBARGO properly, such as the LAN/WAN connections. After verifying that,
Краткое содержание страницы № 20
WLBARGO Manual (1) If you are subscribing Fixed IP connection from your ISP, then select [Fixed IP], and click on [Next]. (2) Enter the network setting provided by your ISP. Then click on [Next]. 18 18 19 19
