Краткое содержание страницы № 1
DMA-1000W
802.11 Wireless Digital Media Adaptor
Quick Start Guide
CONTENTS
ENGLISH 2
Version 1.00
3/2007
Edition 1
DEUTSCH 20
ESPAÑOL 42
FRANÇAIS 62
ITALIANO 82
Р У ССКИЙ 102
Copyright © 2007. All rights reserved.
Краткое содержание страницы № 2
ENGLISH ENGLISH Use your DMA-1000W to play audio, video and photo files on your TV instead of your computer monitor. The files can be on computers or a USB memory stick or hard drive. The following figure shows the DMA-1000W connected to an Ethernet switch (S) and a TV. Computers A~C are connected to the Ethernet switch. In this figure, the DMA-1000W lets the TV play files stored on wireless clients A and B. B USB TV DMA-1000W A You need an HDMI cable if you will connect the DMA-1000
Краткое содержание страницы № 3
ENGLISH Use the following sections in this guide (in the listed order) to view files on computers or on a USB stick. Viewing Files on a USB Stick Viewing Files on Computers 2 Connect Your DMA-1000W 1 Install the Media Server Software 5 Play Your Files 2 Connect Your DMA-1000W 3 Configure Wireless Settings 4 Share Your Files 5 Play Your Files 1 Install the Media Server Software You must install the media server software on each computer that you will use to share files with the DMA-1000W.
Краткое содержание страницы № 4
ENGLISH 2 The installation wizard appears. Follow the directions to install the software. See the requirements section if you have trouble installing or using the media server. 3 Enter your information in this screen. Enter a user name (up to 64 ASCII characters recommended). The company name is optional (up to 64 ASCII characters recommended). Click Registration in the screen that opened when you inserted the CD-ROM (see page 3). Then click Media Server Serial Number to open a
Краткое содержание страницы № 5
ENGLISH 4 Select a destination for the software (or just leave the default). 5 You can specify a name for the media server that the DMA-1000W displays on your TV. It is helpful to use unique names if you install the media server on multiple computers. Up to 34 ASCII characters recommended. 5
Краткое содержание страницы № 6
ENGLISH 6 If you see a screen asking about configuring the Windows XP firewall, click Yes. This allows the DMA-1000W to access the files on your computer that you share. Refer to the User’s Guide if your computer has another software firewall (like ZoneAlarm for example) that you need to configure. 7 This icon displays in the system tray (usually in the bottom right corner) after the installation is done. Double-click the icon to open the server configuration screens. 8 The Published Fol
Краткое содержание страницы № 7
ENGLISH • To remove a folder from the list, click it and then click Cancel Publication. 7
Краткое содержание страницы № 8
ENGLISH 2 Connect Your DMA-1000W Turn off your TV before you connect the DMA-1000W. 1 If your TV has a HDMI connector, use an HDMI cable to connect the DMA-1000W’s HDMI connector (shown) to the TV. 8
Краткое содержание страницы № 9
ENGLISH 2 If your TV does not have an HDMI connector: A Use an S-video cable to connect the DMA-1000W’s S-VIDEO connector (shown) to the TV. B If your TV or audio system has a C If your TV or audio system does not coaxial S/PDIF jack, use an RCA have a coaxial S/PDIF jack, use RCA cable to connect it to the DMA- cables to connect it to the DMA- 1000W’s S/PDIF jack (shown). 1000W’s LEFT and RIGHT jacks (shown). 9
Краткое содержание страницы № 10
ENGLISH 3 Use this step if you want to use a wired connection instead of a wired connection (the DMA-1000W only supports one type at a time). Refer to the User’s Guide to configure wired LAN settings. Skip to the next step if you will use a wireless connection. Connect the DMA-1000W’s LAN port if your content files are on your computer. The media server software should already be installed. Skip to the next step if you will only play files from a USB stick. • Use the straight-through Eth
Краткое содержание страницы № 11
ENGLISH 3 Configure Wireless Settings Use this section to configure the DMA-1000W’s wireless settings if you want to use a wireless connection, otherwise skip to Section 4. Use the remote control to navigate and configure the menus (see page 17 for a figure of the remote control). Do one of the following to configure the wireless settings. 1 Have the DMA-1000W scan for the wireless network (see section 3.1). 2 Manually configure the wireless settings (refer to the User’s Guide for details). 3
Краткое содержание страницы № 12
ENGLISH 3 Select Wireless LAN Settings and then OK. 4 Select whether to have the DMA-1000W scan for available wireless networks, manually enter the network settings, or use Windows® Connect Now (see section 3.2). In this example, you select the scan option and then OK. 5 The DMA-1000W scans and displays a list of available wireless networks. Select the network to which you want to connect. You need to enter any security settings that the network uses. Select OK when you are
Краткое содержание страницы № 13
ENGLISH 6 Make sure you configure this screen with the same settings as on the AP or wireless- enabled computers. 3.2 Wireless LAN Setup Using Windows® Connect Now Windows® Connect Now is included with Windows XP Service Pack 2 (SP2). Follow these steps to use Windows® Connect Now to save your computer’s wireless settings to a USB memory stick which you connect to the DMA-1000W to configure the DMA-1000W’s wireless settings. You do not need to connect the USB stick to the computer yet, you w
Краткое содержание страницы № 14
ENGLISH 4 In the Network name (SSID) field, specify a unique name to identify your wireless LAN. 5 Select Automatically assign a network key to have Windows create a security key. 6 Select Use a USB Flash drive to set up a wireless network. 7 Connect the USB memory stick to your computer’s USB port. 8 This screen appears after your wireless settings are saved on the USB stick. • Remove the USB stick from your computer and insert it in the DMA-1000W’s USB port. • Follow the directions in se
Краткое содержание страницы № 15
ENGLISH 4 Share Your Files 1 Look at your computer screen. Wait for the media server to detect the DMA- 1000W and open a pop-up window with the DMA-1000W’s IP address. If the DMA-1000W does not get an IP address automatically, it uses Auto-IP to assign itself an IP address. If your computer is also set to get an IP address automatically, the computer and the DMA-1000W will be able to communicate. See the User’s Guide if you need to configure the DMA-1000W with a static IP address. Click
Краткое содержание страницы № 16
ENGLISH 5 Play Your Files Set your TV’s input to the DMA-1000W’s connection (either HDMI or S- Video). Remember to change it when you want to use other input. 1 Look at your TV. The DMA-1000W automatically sorts the files on the server into the MUSIC, VIDEO and PHOTO menus. Files on a USB stick are in the USB menu. Number of media servers the DMA-1000W detected. 2 Install the remote control’s batteries. 3 Point the remote control at the front of the DMA-1000W. 16
Краткое содержание страницы № 17
ENGLISH 4 Use the remote control to navigate the menus and play files. Power switches between Return to the main standby and operation menu. modes. Use the 0~9, CLEAR and INPUT keys to input numbers (like for individual scenes or times). MUTE turns off the sound. PAGE up/down scroll up VOLUME up/down adjust or down a list to the the volume. previous or next page. AUDIO switches audio Use the OK, BACK and output between left, right arrow buttons to go and stereo speakers. through the
Краткое содержание страницы № 18
ENGLISH Example of Playing Video Files 1 Press the remote’s VIDEO button to enter the VIDEO menu. 2 The video files are arranged in folders. The number of the item currently selected followed by the total number of items in the menu. Navigation instructions for the menu. In this example, use the arrow and OK buttons to select a folder to see the video files sorted by that criteria. Or use the BACK button to go up in the menu structure. 3 In this example, use the remote’s arrow and OK but
Краткое содержание страницы № 19
ENGLISH The DMA-1000W supports the following file formats. See the User’s Guide for more details. Audio Dolby Digital, DVD-Audio, MPEG-1 and MPEG-2 Layers I, II and III(MP3), MPEG- 2 BC multi-channel Layers I, II and III, MPEG-2 and MPEG-4 AAC-LC, WMA9. Video MPEG-1, MPEG-2 MP@ML, MPEG-4 simple and advanced simple profile, MPEG-4 AVI files and WMV version 9. Photo TIFF, PNG, GIF, BMP, JPEG and JPEG2000. Requirements If you have trouble installing the media server software, make sure your com
Краткое содержание страницы № 20
DE DEUTSCH UTSCH Verwenden Sie den DMA-1000W für die Wiedergabe von Audio-, Video und Fotodateien auf einem Fernsehgerät anstelle eines Computers. Die Dateien können sich entweder auf einem Computer, auf einem USB-Stick oder einer Festplatte befinden. In dieser Abbildung lässt der DMA-1000W auf dem Fernsehgerät Dateien wiedergeben, die auf den Wireless-Clients A und B gespeichert sind. B USB TV DMA-1000W A Um den DMA-1000W an einen HDMI- Anschluss des Fernsehgeräts anzuschließen, benöti
