Краткое содержание страницы № 1
Краткое содержание страницы № 2
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2003 by SMC Networks, Inc. 38 Tesla Irvine, Cali
Краткое содержание страницы № 3
Compliances FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no gua
Краткое содержание страницы № 4
1 | System Requirements • Available 32-bit Cardbus PCMCIA Type II slot • Windows 98SE/Me/2000/XP • Minimum of 32MB RAM and 300 MHz CPU • Minimum of 1 MB available hard disk space for utility and driver installation • Another IEEE 802.11b or 802.11g compliant device installed in your network, such as the SMC2804WBR Barricade g 2.4GHz 54 Mbps Wireless Cable/DSL Broadband Router, or another PC with a wireless adapter, such as the SMC2662W EZ Connect 2.4GHz 11 Mbps Wireless USB Adapter.
Краткое содержание страницы № 5
2 | Package Contents After unpacking the EZ Connect g SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter, check the contents of the box to be sure you have received the following components: • 1 SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter • 1 EZ Installation Wizard and Documentation CD • 1 User Guide Immediately inform your dealer in the event of any incorrect, missing or damaged parts. If possible, please retain the carton and original packing materials in case there is a need to
Краткое содержание страницы № 6
3 | Getting Started… Warning: • Network cards are sensitive to static electricity. To protect the card, avoid touching its electrical components and always touch the metal chassis of your computer before handling the card 1. Turn on your computer and insert the EZ Installation Wizard and Documentation CD. Run the utility software and then reboot when requested. 2. Find an available Cardbus slot in your computer. 3. With the SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter's 68-pin
Краткое содержание страницы № 7
4 | Driver Installation – Option 1 (Recommended) Windows 98SE/Me/2000/XP NOTE: Installation processes will require the use of your original, licensed copy of Windows. Please have your Windows CD available BEFORE proceeding with the installation. This installation method makes the process as simple and Plug-and-Play as possible. Simply run the EZ Installation Wizard, reboot your machine and insert your EZ Connect g SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter. It's as easy as 1-2-
Краткое содержание страницы № 8
5 | Driver Installation – Option 2 Windows 98SE/Me/2000/XP Section 5.1 | Windows 98SE NOTE: Installation processes will require the use of your original, licensed copy of Windows. Please have your Windows CD available BEFORE proceeding with the installation. Step 1: After you have inserted the EZ Connect g SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter in your machine, the Operating System will automatically recognize the adapter and prompt you for the appropriate drivers. Click
Краткое содержание страницы № 9
Step 7: Once all the necessary files are copied from the Windows CD, the driver install process will be complete. Click [Finish] to exit the wizard. Step 8: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the SMC2835W Wireless Cardbus Adapter will be initialized and ready for use. Section 5.2 |Windows Me NOTE: Installation processes will require the use of your original, licensed copy of Windows. Please have your Windows CD available BEFORE proceeding with th
Краткое содержание страницы № 10
Step 4: Once all the necessary files have been copied, the driver installation is complete. Click [Finish] to exit the wizard. Step 5: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the SMC2835W will be initialized and ready for use. Section 5.3 | Windows 2000 Step 1: After you have inserted the EZ Connect g SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter in your machine and turned it back on, the Operating System will automatically recognize the adapter a
Краткое содержание страницы № 11
Step 6: You have now completed the driver installation. Click [Finish] to initialize the adapter. Section 5.4 | Windows XP Step 1: After you have inserted the EZ Connect g SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter in your machine and turned it back on, the Operating System will automatically recognize the adapter and prompt you for the appropriate drivers. Select [Install from a list or specific location] and click the [Next >] button to begin the installation. Step 2: Insert th
Краткое содержание страницы № 12
After clicking [Finish], you will see the following message in your system tray: 6 | Driver Verification Windows 98SE/Me/2000/XP Section 6.1 | Windows 98/Me Step 1: Right-click the My Computer icon on your desktop and click [Properties]. Step 2: Then go to the [Device Manager] tab and open the [Network adapters] section. You should see your SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter in this menu. Highlight it operties]. and click [Pr Step 3: The Device Status shows th
Краткое содержание страницы № 13
Step 3: The Device Status shows that the "This device is working properly". If there are any error messages displayed here, you will need to right-click the SMC adapter and click [Uninstall]. Then reboot the machine and go through the installation process again. Section 6.3 | Windows XP Step 1: Click [Start] and click [Control Panel]. Then click the [Performance and Maintenance] icon and select [System]. Step 2: Then go to the Hardware tab and click [Device Manager]. Open the [
Краткое содержание страницы № 14
7 | Utility Installation Windows 98SE/Me/2000/XP This Installation method makes the process as simple and Plug-and-Play as possible. Simply run the EZ Installation Wizard, reboot your machine and insert your EZ Connect g SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter. It's as easy as 1-2-3. Step 1: Insert the EZ Installation Wizard and Documentation CD. Step 2: Click the [Install Utility] button. Step 3: The installation wizard will begin. Click [Next >].
Краткое содержание страницы № 15
Step 4: You will be given the option to choose the location where the Configuration Utility will be installed. It is recommended to leave this at the default value. Click [Next >] to continue. You will also be given the option to choose the Folder name that will appear in the Start Menu. It is recommended to leave this at the default value. Click [Next >] to continue.
Краткое содержание страницы № 16
Step 5: Click [Next] to begin copying the utility files to your computer. You have now completed the utility installation process. Click [Finish] to exit the wizard. Step 6: Please shut down your machine. Then insert your SMC2835W and boot up the operating system.
Краткое содержание страницы № 17
8 | Utility Configuration When the utility program is running, there will be a quick launch icon in the lower right-hand corner of the taskbar. The icon will be GREEN if you have a good connection to a wireless network. If it is red, you will need to verify the network settings and check to be sure that the Wireless Access Point on your network is turned on. You may also need to re-position the Access Point and place it in a higher position so that you are able to gain more wireless sig
Краткое содержание страницы № 18
Section 8.1 | Configuration When the Configuration Utility is initialized, the Configuration window may be immediately shown. This will show you the current select profile of the wireless card. Click [New] to enter a new name for the current profile. Click [Save] to save the current settings to the selected profile. Click [Delete] to delete the current profile. The options for Operating Mode are "802.11 Adhoc" and "Infrastructure". Adhoc networks consist of wireless clients only. I
Краткое содержание страницы № 19
Section 8.2 | Link Information Associated BSS ID: Shows the MAC Address of the associated Access Point Current Tx Rate: Current transmit rate value Throughput: Number of packets sent and received SSID: Workgroup name of the wireless network that you are connected to Link Quality: Shows the relative link quality (e.g., lack of frame errors) of the wireless connection to the Access Point. Signal Strength: Shows the relative signal strength of the wireless connection to the Access Point.
Краткое содержание страницы № 20
Section 8.3 | IP Information The IP Information screen displays network connection information. Section 8.4 | Site Survey The Site Survey tab scans and displays all Access Points on the wireless LAN. The data is organized by columns signifying the "SSID", "BSSID", "Channel", "Encryption", "Signal", and "Network Type". The key symbol in the Encryption column signifies that the network is encrypted. You will need to obtain the WEP information from the network administrator. To c
