Руководство по эксплуатации Renesas Direct Dummy IC M3T-DIRECT100S

Краткое содержание страницы № 1

M3T-DIRECT100S
Direct Dummy IC for 100-pin 0.65-mm-pitch QFP
User's Manual
Keep safety first in your circuit designs!
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs,

Краткое содержание страницы № 2

1. Outline The M3T-DIRECT100S is an accessory tool for connecting an emulator probe and the target. Its dimensions are the same as those of the 100-pin 0.65-mm-pitch QFP (23 x 17 mm) IC packages (100P6S-A and 100P6S-E). M3T-DIRECT100S main unit 2. Package Components (See Figure 1) Figure 1 Package component (1) M3T-DIRECT100S main unit..........x1 (2) M3T-DIRECT100S User's Manual (This manual) 3. Specifications Table 1 Specifications : Position of No. 1 pin Be sure to align the pins. Applicable

Краткое содержание страницы № 3

6. Target Foot Pattern Note: The recommended foot pattern of the M3T-DIRECT100S is a common foot pattern for the 100P6S-A and M3T-DIRECT100S. For the M3T-DUMMY100S, use the foot pattern recommended by Matsushita Electric Works, Ltd. shown in the M3T-DUMMY100S User's Manual. Unit: mm Figure 4 Target foot pattern 7. Recommended Procedure for Soldering the M3T-DIRECT100S (1) Fix the soldering position. Fix by solder tentatively. (2) Apply the flux. • Apply the flux plenty to the half circle through

Краткое содержание страницы № 4

8. Precautions CAUTION Caution to Be Taken for This Product: • Before mounting this product, be sure to check the pin positions. IMPORTANT Notes on This Product: •We cannot accept any request for repair. • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/en/tools 9. Correspondence of Connectors J1, J2 Table 2 Correspondence of the connectors Pin No. of Pin No. of Pin No. of Pin No. of Pin No. of Pin No.