Краткое содержание страницы № 1
®
ScreenLogic
Video & Lighting Protocol
Adapter
User’s and Installation Guide
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
Краткое содержание страницы № 2
i ® ScreenLogic Video & Lighting Protocol Adapter kit contents The following items are included in the kit. Kit contents • ScreenLogic Video & Lighting Protocol Adapter (P/N 520854Z) � AC/DC power adapter � RJ45 cable � DB9M to RJ45 adapter � User’s and Installation Guide (this manual) Technical Support Sanford, North Carolina (8 A.M. to 5 P.M. ET) Moorpark, California (8 A.M. to 5 P.M. PT) Phone: (800) 831-7133 - Fax: (800) 284-4151 Related manuals - Download the IntelliTouch ScreenLogic User’s
Краткое содержание страницы № 3
1 Contents ScreenLogic Video and Lighting Protocol Adapter Connection Diagram . 2 Connecting the ScreenLogic Video & Lighting Protocol Adapter ............ 3 Installing the ScreenLogic Video & Lighting protocol adapter................. 4 Configuring the System ....................................................................... 5 Configuring the Video Camera(s) for the first time ................................ 6 Using the Video Camera Interface ............................................
Краткое содержание страницы № 4
2 ScreenLogic Video and Lighting Protocol Adapter Connection Diagram ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide ScreenLogic Wireless 1 234 WAN Router 1234 Existing ScreenLogic Protocol Adapter (Pentair Brick: xx-xx-xx) Camera LAN For additional cameras COM 1 ScreenLogic Video (max qty. 4) an optional & Lighting Protocol Network switch is Adapter required. Powerline Note: PSC light Interface AC Power switches are compatible with Module adapter incondescent light b
Краткое содержание страницы № 5
3 Connecting the ScreenLogic Video & Lighting Protocol Adapter The following describes how to connect the Video & Lighting Protocol adapter to an existing ScreenLogic system. 1. Connect the provided RJ45 (CAT5) cable to an available port (1, 2, 3, or 4) on the ScreenLogic wireless router. Connect the other end of the cable to the LAN port on the Video & Lighting Protocol adapter (see diagram on page 2). 2. Lights cable connection: Connect an RJ45 (CAT5) cable to the COM 1 port on the adapter. Co
Краткое содержание страницы № 6
4 Installing the ScreenLogic Video & Lighting protocol adapter Before installing the ScreenLogic software, make sure that you are running the latest version. The latest software version for ScreenLogic can be obtained from the Pentair website at: http://www.pentairpool.com/techinfo/instructions.htm Note: If an existing ScreenLogic system is not present, please install the standard ScreenLogic system first as described in the User’s Guide provided with ScreenLogic. Once install
Краткое содержание страницы № 7
5 Step 2: Updating or installing ScreenLogic Connect software on your PC ScreenLogic Connect is the program that will allow you to configure and operate your IntelliTouch pool/spa control system. 1. Connect the Video & Lighting protocol adapter to port 1, 2, 3, or 4 on your wireless router. 2. Run setup.exe on the installation CD. 3. Follow the prompts to update or install ScreenLogic Connect. Installing the system for the first time Have the camera(s) cable(s) ready to connect to the ScreenLog
Краткое содержание страницы № 8
6 3. The software will configure the smaller ScreenLogic Protocol Adapter for use with the Video & Lighting Protocol Adapter. A “System Configuration Complete” message box will be displayed. Click OK to continue with the installation. Please be patient while the Video & Lighting Protocol adapter synchronizes the settings from the IntelliTouch system for the first time. This can take anywhere from 3 to 15 minutes depending upon the complexity of your IntelliTouch system. Note: When synchronizing
Краткое содержание страницы № 9
7 5. Select the camera manufacture and model and click the OK button. Note: Only configure one camera at a time. For example, connect the first camera, then configure it. Plug in the second camera and repeat. 6. Select the installed video camera model to rename the camera and set its IP address. The cameras IP address must be in the same subnet range as your ScreenLogic Video & Lighting Protocol Adapter. The default IP address for the ScreenLogic Video & Lighting Protocol Adapter is 192.168.2.3
Краткое содержание страницы № 10
8 9. Click the RED X box on the top right side of the dialog to exit the Configuration setup dialog. 10. Click on the Video & Lighting Protocol adapter in the Local System box, then click START. Note: If the Video & Lighting adapter does not show up under the Local Systems, you can manually type in the adapter’s IP address in the System Name field. The adapter’s default IP address is 192.168.2.3 11. Click the Start ScreenLogic button to start the ScreenLogic program. ScreenLogic Video & Lighting
Краткое содержание страницы № 11
9 Using the Video Camera Interface The ScreenLogic Video & Lighting Protocol Adapter supports up to four video cameras. Each camera can be accessed by clicking the camera’s name tab at the bottom of the Video screen. Each camera has its own set of controls. Camera controls include: � Full Screen: Monitor in full screen mode � Low, Med, High: Set the camera resolution � 1,2,3,4,5,6,7,8: Preset camera positions (This feature is not supported on the BL-C1A camera) � (-) (+) : Camera zoom out (-)
Краткое содержание страницы № 12
10 Installing Lights for the first time Have the Powerline Interface module ready to connect to COM 1 port on the ScreenLogic Video & Lighting Protocol adapter during the program installa- tion setup. Each light switch must be setup one at a time. WARNING - All switches work must be installed by a licensed electrician, and must conform to the National Electric Code and all national, state, and local codes. To install the PCS Light switches: Note: PCS light switches are compatible with incondesc
Краткое содержание страницы № 13
11 5. Click the Add New button. 6. Press the light switch five (5) times in the ON position. The green LED on the light switch will start blinking rapidly which indicates that the light is ready to be configured. See page 2 for connection diagram. 7. Click the OK button on the message dialog box. 8. Rename the light in the “Name” box. Use a name that describes where the light is located. Click the OK button. The light setup procedure will take about one minute for each light fixture. 9. To setu
Краткое содержание страницы № 14
12 10. Click Done when finished. 11. Click the RED X box on the top right side of the dialog to exit the Configuration setup dialog. 12. Select the Video & Lighting Protocol Adapter in the lower dialog box as shown below. 13. Click the Start ScreenLogic button to start the ScreenLogic program. ScreenLogic Video & Lighting Protocol Adapter address 14. Click the Lighting tab to access the LIGHTING screen. ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
Краткое содержание страницы № 15
13 Using the Light Interface The ScreenLogic light screen displays the following light(s) controls. Click anywhere on the light bar to set the light intensity Click to switch Click to switch light ON light OFF ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
Краткое содержание страницы № 16
P/N 520936 - Rev A ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
