Краткое содержание страницы № 1
®
Hotwire ATM Line Cards
Models 8335, 8355, 8365, and 8385
User’s Guide
Document No. 8335-A2-GB20-70
February 2003
Краткое содержание страницы № 2
Copyright © 2003 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Paradyne Corporation, 8545 126th Ave
Краткое содержание страницы № 3
Краткое содержание страницы № 4
Contents 3 Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Saving and Restoring Configuration Options . . . . . . . . . . . . . . . . . . . . 3-1 Entering Card Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Entering the Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Setting Spectrum Management (Models 8355 and 8385) . . . . . . . . . . 3-4
Краткое содержание страницы № 5
Contents 6 Maintenance Procedures Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Clearing NVRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Uploading and Downloading a Configuration. . . . . . . . . . . . . . . . . . . . 6-3 Uploading a Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Downloading a Configuration. . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
Contents iv February 2003 8335-A2-GB20-70
Краткое содержание страницы № 7
About This Guide Document Purpose and Intended Audience This guide contains information needed to set up, configure, and operate the Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385, and is intended for installers and operators. New Features for This Document Release This version of the Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385, User’s Guide removes an appendix containing information about the Hotwire 6390 ReachDSL Modem. This information is now in the Hotwire ReachD
Краткое содержание страницы № 8
About This Guide Section Description Appendix B, SNMP Traps Contains SNMP trap compliance information. Appendix C, Connector Pin Lists the pin assignments for the GranDSLAM Telco Assignments connectors. Appendix D, Technical Contains physical and regulatory specifications, and Specifications power consumption values. Index Lists key terms, acronyms, concepts, and sections in alphabetical order. A master glossary of terms and acronyms used in Paradyne documents is available on the World Wide
Краткое содержание страницы № 9
About the Hotwire ATM Line Cards 1 Hotwire ATM Line Cards ® The Hotwire 8335, 8355, 8365, and 8385 Asynchronous Transfer Mode (ATM) Line Cards are circuit boards mounted in a Hotwire 8620 or 8820 GranDSLAM (Digital Subscriber Line Access Multiplexer) and used to transport ATM cells at high speeds over a single twisted-pair connection. Model 8335 supports Symmetric Digital Subscriber Line (SDSL). It can be set to AutoBaud to the highest rate the loop can support, or to use a fixed line rate
Краткое содержание страницы № 10
1. About the Hotwire ATM Line Cards Hotwire ATM Line Card Features The Hotwire ATM Line Cards have these standard features: Asynchronous Terminal Interface (ATI). Provides a menu-driven VT100-compatible terminal interface for configuring and managing the unit locally or remotely by Telnet session. Alarm indication. Activates front panel LEDs. Diagnostics. Provides OAM F5 loopback (ATM Ping), self-test, and line loopback. Device and test monitoring. Provides the capability of tracking
Краткое содержание страницы № 11
1. About the Hotwire ATM Line Cards ATM Features The cards’ ATM features include: Classes of service. Supports traffic management service categories necessary to support voice and data applications: —CBR —rt-VBR —nrt-VBR — UBR (only class of service supported for the Model 8355) Auto configuration. Two Virtual Channel Connections (VCCs) per port are automatically configured, providing data and voice services. Multiple virtual circuits. Up to 250 additional VCCs can be configured by th
Краткое содержание страницы № 12
1. About the Hotwire ATM Line Cards Network Configurations Figure 1-1 shows the Hotwire ATM Line Card used to carry voice over DSL. PSTN Voice Customer Premises Traffic LAN Hotwire ATM Voice Line Card ISP Gateway SCM Integrated ATM Cells ATM Cells ATM Access Network Device DSL (IAD) Corporate GranDSLAM Site 00-16682 Figure 1-1. Endpoint with Voice Interfaces Figure 1-2 shows a configuration in which the endpoints include a router to provide data encapsulation. Hotwire ATM Customer Premises Lin
Краткое содержание страницы № 13
1. About the Hotwire ATM Line Cards SNMP Management Capabilities The Hotwire ATM Line Cards support SNMP Version 1, and can be managed by ® Paradyne’s OpenLane or any industry-standard SNMP manager. Management Information Base (MIB) Support For a detailed description of supported MIBs, visit Paradyne’s Web site at www.paradyne.com. The following MIBs are supported: ATM Forum SNMP M4 Network Element View (af-nm-0095.001) Definitions of Managed Objects for the ADSL Lines (RFC 2662) Definit
Краткое содержание страницы № 14
1. About the Hotwire ATM Line Cards 1-6 February 2003 8335-A2-GB20-70
Краткое содержание страницы № 15
Menus and Screens 2 Menu and Screen Formats The Hotwire DSLAM has an ASCII-based menu- and screen-driven user interface system that enables the user to configure and monitor the Hotwire cards. This section describes the components of a typical Hotwire menu and screen. A typical Hotwire menu format is shown below: 1 2 3 1. Menu Title is the top line of the menu window that displays the title of the menu or submenu. 2. Menu List is the portion of the menu window that displays the list of menu
Краткое содержание страницы № 16
2. Menus and Screens Components of a Hotwire Screen A typical Hotwire screen looks like this: 1 2 3 4 1. System Header Line is the top right line of the screen. This line contains two fields of system login information: — The first field displays a user-defined chassis or individual card name. If you have not defined the system name, appears. — The second field displays the previous remote or local login depending on what is currently displayed in the middle field (such as the curr
Краткое содержание страницы № 17
Краткое содержание страницы № 18
2. Menus and Screens General Navigation Keys Table 2-1. General Navigation Keys Keys Definition Backspace, Del, Ctrl-d Erases the character to the left of the prompt. Ctrl-e Returns to the card selection screen from any screen. Ctrl-r Resets counters (on monitoring statistics displays). Ctrl-u Clears the current input or prompt line. Ctrl-v Displays pop-up menus. Esc h, ? Displays the online Help screen. Esc l, Ctrl-l Refreshes the screen. Esc n Goes to the next window. Esc p, Ctrl-z Goes back t
Краткое содержание страницы № 19
2. Menus and Screens User Login Screen (MCP) You can log in to the Hotwire DSL system using either a local VT100-compatible terminal or a remote Telnet connection. However, the Hotwire DSL system accepts only one login session at a time. The User Login screen appears if one or more users have been defined on the Management Communications Processor (MCP). Enter your login ID and password. The login ID and password are case-sensitive. If you have RADIUS Authentication, this verification may ta
Краткое содержание страницы № 20
2. Menus and Screens Quick Card Select Screen The Quick Card Select screen displays all the cards in the chassis and lets you Telnet to a selected card in the chassis. Information is displayed only for populated slots. See the Hotwire Management Communications Controller (MCC) Card, IP Conservative, User’s Guide for more information about the Hotwire Chassis Main Menu. Procedure To select a card: 1. From the Hotwire Chassis Main Menu, select A for Quick Card Select. 2. At the Goto: prompt,
