Краткое содержание страницы № 1
IP Protocol Support
Personal Server
Instruction Manual
www.lindy.com
No. 32454
Page 1
Краткое содержание страницы № 2
Contents What’s in the box?................................................................................................ 3 Product Information.............................................................................................. 4 IP Protocol Setup.................................................................................................. 5 Configuring TCP/IP settings (Windows 98/Me)......................................... 6 Configuring TCP/IP settings (Win
Краткое содержание страницы № 3
What’s in the box? Thank you for purchasing the LINDY Personal Server. Before you move on, please verify your package contains the following items: 1. One Personal Server (Hard Disk not included) 2. One Power adapter 3. One Quick Install Guide 4. One Utility/Manual CD-ROM 5. Rubber foot x 4 6. Screws for HD installation x 4 Page 3
Краткое содержание страницы № 4
Product Information Rear Panel Front Panel Reset Button Press this button to reset the Power Button Personal Server to its default After connecting the Personal settings Server to a mains power outlet, press this button to switch on LAN Port To power off, press and hold Connect the network cable here the button for two seconds until the power LED flashes Power Connection Connection for the external power adapter
Краткое содержание страницы № 5
IP Protocol Setup Configuring network protocols How to configure your PCs TCP/IP settings To allow users to launch the device easily we have provided a Before proceeding you must obtain an IP address in advance. convenient Quick Setup Wizard which automatically detects If you don’t have an IP address or you are not going to access the Personal Server on your LAN. the Personal Server via the Quick Setup Wizard, please choose an address (highlighted in blue) within the following To run
Краткое содержание страницы № 6
IP Protocol Setup Configuring TCP/IP settings (Windows 98/Me) 2. Select TCP/IP >(Your Ethernet Adapter), then click 1. Click Start >Settings >Control Panel >Network on the Properties button. Page 6
Краткое содержание страницы № 7
IP Protocol Setup 3. Click IP Address and then select Specify an IP 4. Type in the IP address. The subnet mask is address 255.255.255.0 5. Click OK, then OK again. The system may ask for your Windows CD. Follow the on-screen instructions then restart your PC. Page 7
Краткое содержание страницы № 8
IP Protocol Setup Configuring TCP/IP settings (Windows 2000) 2. Double-click on Local Area Connection and then click 1. Click Start >Settings >Network and Dial-up on the Properties button connections Page 8
Краткое содержание страницы № 9
IP Protocol Setup 3. Highlight Internet Protocol (TCP/IP), and then click 4. Select Use the following IP address. Enter the IP Properties address. The subnet mask is 255.255.255.0. Click OK and restart your computer. Page 9
Краткое содержание страницы № 10
IP Protocol Setup Configuring TCP/IP settings (Windows XP) 3. Highlight Internet Protocol (TCP/IP) and then click 1. If you are in Classic Start menu view, click: Properties Start >Settings >Control Panel >Network Connections If you’re in Start menu view, click: Start >Control Panel >Network Connections 2. Double-click Local Area Connection Page 10
Краткое содержание страницы № 11
IP Protocol Setup 4. Enter the IP address you chose earlier. The subnet mask is entered automatically in Windows XP. Click OK. The IP configuration of your PC is now complete. Please refer to the instructions that follow to complete the Hard Disk Installation and Quick Setup Wizard. Page 11
Краткое содержание страницы № 12
Hard Disk Installation 1. Use a screwdriver to loosen the two screws on the rear 4. Insert the IDE connector into the IDE socket on the panel. Hard Disk. Make sure that pin 1 on the cable connects to pin1 on the hard disk. The location of pin 1 can be identified by the red strip on the edge of the cable. The IDE cable is ‘keyed’ to fit correctly into most hard drives. Screws IDE Connector 2. Grab the front panel and pull the chassis out of the case.
Краткое содержание страницы № 13
Hard Disk Installation 5. Push the power connector into the power socket on the hard drive. The power connector is designed to be inserted into the socket one way only. Please check the shape for the correct installation. Power Connector 6. Secure the hard disk using the supplied screws. 7. Push the hard disk and chassis back into the case and tighten the two case screws. Page 13
Краткое содержание страницы № 14
Quick Setup Wizard The Quick Setup Wizard provides an installation guide from cable attachment to initialization. Please follow the steps below to proceed. Please note: If you’ve run the wizard previously and there are existing shortcuts for accessing and managing the device on your desktop, please delete them before running the wizard again. Starting the Quick Setup Wizard Insert the supplied utility CD into your CD-ROM drive. The main m
Краткое содержание страницы № 15
Quick Setup Wizard After the Personal Server has been automatically installed by To access the hard drive the Quick Setup Wizard, there will be two shortcuts on your desktop: Double-click the Access my Personal Server icon to access the hard disk. An authentication window will pop up. Please fill Setup My Personal Server allows you to in the user name and password to access the folders. setup the Personal Server using a web browser. To setup the Personal Server, please see t
Краткое содержание страницы № 16
Management Guide Setup the Personal Server Home Page To configure the Personal Server via your computer with a The Personal Server is managed via a web-based graphical web browser installed, please follow the steps below: user interface (GUI) that can be accessed with a standard HTML (HTTP v1.0) compliant browser. Double-click the Setup My Personal Server icon on your desktop. The User name and Password window appears. Enter admin in the User Name location (default value
Краткое содержание страницы № 17
Management Guide Status Detail Status To see more information about the Personal Server, such as Host name: the Personal Server’s identification HD used (%), up-time, samba users and FTP users, select: IP Address: the IP address of the Personal Server Version: the Firmware version Click here for more information... Configuration IP Address: the IP address of the Personal Server HD used (%): the total amount of HD used Click each item to access each manageme
Краткое содержание страницы № 18
Management Guide IP Address Setting The Networking management function allows users to modify the Host name, IP address, Superuser/Password and the IP/MAC Filter settings. Host Name Setting DHCP Enable: click Yes to enable the Personal Server as a DHCP client IP Address: the IP address of the Personal Server Subnet Mask: the subnet mask must be compatible with the other devices on your network Gateway: enter the Router or Gateway IP of your network, Host Na
Краткое содержание страницы № 19
Management Guide Superuser/Password Setting IP Filter You can setup the administration user account and password The IP Filter function provides access management by IP on this page. The user name/password is used to access the address filtering. There are three configuration modes: web based GUI to setup the Personal Server. 1. Disable: disables the IP Filter function. All IP addresses are allowed to access the Personal Server 2. Allowed: allows you to setup the IP addresses that
Краткое содержание страницы № 20
Management Guide MAC Filter The MAC Filter function provides access management by MAC address filtering. There are three configuration modes: From this page you can manage the Personal Server. The Administration section provides the tools to: 1. Disable: disables the MAC Filter function. All MAC addresses are allowed to access the Personal Server Restart the system 2. Allowed: lets you setup the MAC addresses that are Format the hard disk allowed to access the Person
