Краткое содержание страницы № 1
ENUWI-NX2
IEEE 802.11n draft 2.0 Wireless
USB 2.0 Adapter
Users Guide
Краткое содержание страницы № 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu
Краткое содержание страницы № 3
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V1.2.1 (2002-08) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment This device is a 2.4 GH
Краткое содержание страницы № 4
[Dutch] essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti Hawnhekk, Encore Electronics Inc, jiddikjara li dan ENUWI-NX2 jikkonforma mal- ħti ġijiet essenzjali u ma provvedimenti o ħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. [Maltese] Alulírott, Encore Electronics Inc nyilatkozom, hogy a ENUWI-NX2 megfelel a vonatkozó alapvetõ Magyar [Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski Niniejszym Encore Electronics Inc o świ
Краткое содержание страницы № 5
Alulírott, Encore Electronics Inc nyilatkozom, hogy a ENPWI-NX2 megfelel a vonatkozó alapvetõ Magyar [Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski Niniejszym Encore Electronics Inc o świadcza, że ENPWI-NX2 jest zgodny z zasadniczymi wymogami oraz pozosta łymi stosownymi postanowieniami Dyrektywy 1999/5/EC. [Polish] Encore Electronics Inc declara que este ENPWI-NX2 está conforme com os requisitos essenciais e outras Português [Portuguese] disposições da
Краткое содержание страницы № 6
TABLE OF CONTENT Introduction ................................................................................................ 1 Overview of this User’s Guide ............................................................................... 1 Unpacking and Setup.................................................................................. 2 Unpacking .............................................................................................................. 2 Setup......................
Краткое содержание страницы № 7
INTRODUCTION Congratulations on your purchase of ENUWI-NX2 Wireless 802.11n USB Adapter. This manual contains detailed instructions regarding the operation of this product. Please keep this manual for future reference. With the ENUWI-NX2 Wireless 802.11n USB Adapter, a desktop or laptop computer can communicate with another computer wirelessly. An easy-to-use utility is bundled with the ENUWI-NX2 Wireless 802.11n USB Adapter for configuration, monitoring, and diagnostic purposes. The
Краткое содержание страницы № 8
UNPACKING AND SETUP This section provides unpacking and setup information for the ENUWI-NX2 Wireless 802.11n USB Adapter. Unpacking The box should contain the following items: One ENUWI-NX2 Wireless 802.11n USB Draft 2.0 USB Adapter One Driver & Utility CD-ROM If any item is found missing or damaged, please contact your local reseller or the store of purchase for replacement. Setup Before installation, check the following: Make sure your computer is running at least a 300MHz or abo
Краткое содержание страницы № 9
IDENTIFYING EXTERNAL COMPONENTS LED When the LED is blinking, the WLAN Adapter is transmitting or receiving data on the Wireless Ethernet network. Check the installation The LED of the ENUWI-NX2 Wireless 802.11n USB Adapter is clearly visible and the status of the network link can be seen instantly: 1. When connected to the USB port and the driver were installed, the LINK LED will start blinking, and it means that the device is starting to scan a wireless device near the ENUWI-NX2 Wir
Краткое содержание страницы № 10
SOFTWARE INSTALLATION This section describes how to install the driver and utility for the ENUWI-NX2 Wireless 802.11n. Windows Based Utility Installation 1) Insert the Utility and Driver CD-ROM into your computer’s CD-ROM Drive and then click the Setup Wizard. 2) Follow the Install Shield Wizard Instructions 4
Краткое содержание страницы № 11
3) Click Finish to restart the computer. 4) Plug the ENUWI-NX2 Wireless 802.11n into an available USB slot on your computer. 5
Краткое содержание страницы № 12
WIRELESS UTILITY SETTING The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the utility icon that appears in the taskbar. The Wireless Adapter Configuration Utility is divided into six sections: Link Info, Configuration, Site Survey, Profile, WPS and About. Link Information This is the default screen after launching the Utility program. Status: Shows the associated BSSID, which can be used to identify the wireless access
Краткое содержание страницы № 13
Link Quality: Shows the link quality of the ENUWI-NX2 Wireless 802.11n with the Access Point when operating under Infrastructure mode. Signal Strength: Shows the wireless signal strength of the connection between the ENUWI-NX2 Wireless 802.11n with the Access Point. Data Rate: Shows the statistics of data transfer, and the calculation is based on the number of packets transmitted and received. Configuration This screen is where you set the basic wireless settings for the ENUWI-NX2 Wir
Краткое содержание страницы № 14
Authentication and Security: The following options are available: Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA EAP-TLS, WPA2 EPA-TLS . Select Open System, Shared Key for WEP data encryption feature. Open or Shared Key Open System and Shared Key require the user to set a WEP key to exchange data with other wireless clients that have the same WEP key. Default Key: select one of the 4 keys to use. Network Key: choose the encryption way, either in HEX or ASCII formats, and enter the
Краткое содержание страницы № 15
WPA EAP-TLS If using the WPA/WPA2 EAP-TLS authentication method, please select the Encryption type for TKIP or AES then select the WPA/WPA2 Certificate from drop down list. 9
Краткое содержание страницы № 16
Site Survey This screen allows the user to scan for available wireless networks (wireless clients and Access Points). It also allows the user to establish wireless communications with an available wireless network. Available Network – displays the wireless networks (wireless clients and access points) that are within range. Select any one of the wireless networks by double-clicking on it or clicking on the “Connect” button. Click the “Refresh” button to scan for available networks
Краткое содержание страницы № 17
Profile Profile – The user can create and manage the created profiles for home, work or public areas. By double-clicking on one of the created profile, the setting will adjust to the specific setting such as SSID, channel, and encryption as saved by that particular profile. Add: Adds a profile. The following screen will appear. The user can enter the necessary information required for accessing Access Points or Wireless Router Remove: Deletes the selected profile Edit: Edit an exist prof
Краткое содержание страницы № 18
WPS WiFi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance that is designed to ease the task of setting up and configuring security on a wireless network. There are two methods used in the WPS as below instruction. Push the button on my access point Using the WPS configuration with the “Push the button on my access point” method, the configuration steps as below: 1) Selected the “Push the button on my access point”. 2) Push the WPS configuration but
Краткое содержание страницы № 19
4) If the WPS configuration was successful, the follow window will show on. 5) If the WPS configuration was failed, the follow window will show on. 13
Краткое содержание страницы № 20
14
