Руководство по эксплуатации Adder Technology Adder SmartView SV2

Руководство по эксплуатации для устройства Adder Technology Adder SmartView SV2

Устройство: Adder Technology Adder SmartView SV2
Категория: Сетевая карта
Производитель: Adder Technology
Размер: 0.83 MB
Добавлено: 4/5/2014
Количество страниц: 34
Печатать инструкцию

Скачать

Как пользоваться?

Наша цель - обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства Adder Technology Adder SmartView SV2. Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с Adder Technology Adder SmartView SV2.

Для Вашего удобства

Если просмотр руководства Adder Technology Adder SmartView SV2 непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

  • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции Adder Technology Adder SmartView SV2 на полном экране, используйте кнопку Полный экран.
  • Скачивание на компьютер - Вы можете также скачать инструкцию Adder Technology Adder SmartView SV2 на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
Adder Technology Adder SmartView SV2 Руководство по эксплуатации - Online PDF
Advertisement
« Page 1 of 34 »
Advertisement
Печатная версия

Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше - Печатать инструкцию. Вам не обязательно печатать всю инструкцию Adder Technology Adder SmartView SV2 а только некоторые страницы. Берегите бумагу.

Резюме

Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для Adder Technology Adder SmartView SV2. Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

Краткое содержание
Краткое содержание страницы № 1

V Viie ew w
SMART
SMART View 4 SV4
SMART View 2 SV2
www.addertec.com
I
N
S
T
A
L
L
A
T
I
O
N
&
U
S
E
V Viie ew w
SMART

Краткое содержание страницы № 2

About this manual SmartView - Installation and Use Sixth edition (April 1999) Part No. ADD0026/6 (c) 1999 Adder Technology Ltd. All rights reserved. Whilst every precaution has been taken in the preparation of this manual, Adder Technology Ltd assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. We reserve the right to change the specifications, functions and circuitry of the product without no

Краткое содержание страницы № 3

Radio Frequency Energy Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. European EMC directive 89/336/EEC This equipment has been tested and found to comply with the limits for FCC Compliance Statement (United States) a class B computing device in accordance with the specifications in the European standard EN55022. These limits are designed to This

Краткое содержание страницы № 4

Contents 1. Introduction..................................................................................... 5 1.1 Key features........................................................................................... 5 1.2 Package contents................................................................................... 6 1.3 Product information ............................................................................... 6 2. Installation...................................................

Краткое содержание страницы № 5

4. SmartView configuration options................................................. 21 4.1 Screen saver time delay ........................................................................ 21 4.2 Display options ...................................................................................... 21 4.3 Autoscan lock on mode and delay time ................................................ 22 4.4 Mouse mode and mouse switching of channels .................................... 23 4.5 Keyboard hotkey

Краткое содержание страницы № 6

1. Introduction Thank you for purchasing the Adder SmartView. Your SmartView is a high performance keyboard, monitor and mouse sharing device which supports a wide range of PC hardware and software platforms. 1.1 Key features Control multiple PCs from a single keyboard, monitor and mouse. SmartBoot feature automatically boots all machines during power up. Mixed AT/PS2 keyboards and PS2/RS232 mice supported as standard. Can be cascaded without limitation to provide a video switching network.

Краткое содержание страницы № 7

1.2 Package contents SmartView. Power supply suitable for your country. This installation guide. 1.3 Product information Fig. 1(a). SmartView (SV4 version supporting 4 PCs) SmartView Installation and Use Page 6

Краткое содержание страницы № 8

Fig. 1 (b). SmartView (SV2 version supporting 2 PCs) Fig. 1 (c) - Remote control pad / display (optional accessory for 4 port models) SmartView Installation and Use Page 7

Краткое содержание страницы № 9

2. Installation 2.1 What you will need Cables to connect the SmartView to each of your PC keyboard, video and mouse ports. Cable specifications are given in appendix A. (You do not need to connect a mouse cable if you are not using the mouse). A monitor with a standard VGA/SVGA (15 pin) connector that will work when connected directly to each of your PCs. SmartView supports low and high resolution monitors. A standard AT or PS/2 style keyboard. If you are using an AT keyboard with a 5 pin

Краткое содержание страницы № 10

Use of PS/2 and RS232 style mice with the SmartView - All of the mouse connections from SmartView to PCs support either a PS/2 or an RS232 mouse. SmartView automatically converts from the PS/2 mouse commands to RS232 serial mouse commands. Serial mice types are selected by using an adapter as described ® in Appendix A. This adapter is the same as is shipped with Microsoft auto-sensing mice. The SmartView will operate without a mouse connected if you do not wish to use one. 2.2 Mounting the Smart

Краткое содержание страницы № 11

the monitor and each of the computers in turn. Failure to switch the SmartView and computers on in the correct order can lead to the mouse and/or keyboard not being recognised by the computers when they are switched on. 2.4 Configuring your PCs Configure you PC in the same way that you would if your keyboard, mouse and monitor were all connected directly to your PC, but bearing in mind the following points: SmartView emulates Microsoft compatible serial, IntelliMouse and PS/2 mice, so ensure t

Краткое содержание страницы № 12

In configure mode, options are entered by typing a letter followed by a number followed by (enter). Use ESC to abort the entry of an option. The SmartView will remain in configure mode until you type 'E' (enter). For example: to set hotkey option 2 type the following at the 'C' prompt (at SmartView 'C' prompt) H H2 2 e e To exit configure mode type: E Ee e 2.6 Summary of SmartView configuration options Full details of each of the configuration options and their uses are given in section 4. B1 -

Краткое содержание страницы № 13

T1 - 2 seconds autoscan delay time before switching to next port (default) T2 - 5 seconds autoscan delay time before switching to next port T3 - 7 seconds autoscan delay time before switching to next port T4 - 10 seconds autoscan delay time before switching to next port T5 - 15 seconds autoscan delay time before switching to next port T6 - 20 seconds autoscan delay time before switching to next port T7 - 30 seconds autoscan delay time before switching to next port T8 - 60 seconds autoscan delay

Краткое содержание страницы № 14

P - Sets password - see section 4.7 for instructions. E - Exits configure mode and returns the SmartView to normal operation mode. 2.7 Other useful installation information PC boot up sequence - When your PCs are powered on they communicate with any attached keyboards and mice and setup parameters required by the particular operating system. It is necessary for the SmartView to be attached and powered on during this sequence so that it can give the required responses and keep track of all the mo

Краткое содержание страницы № 15

With the PS/2 mouse disconnected, change the channel using the keypad or keyboard hotkeys. The SmartView detects that the mouse has been disconnected and triggers the automatic recovery system. Plug in the PS/2 mouse and the SmartView will re-initialise it. 2.9 Hot plugging the SmartView into running systems and re- enabling disconnected CPU PS/2 mouse connections It is adviseable to switch off the systems that are going to be connected to the SmartView before installation. However if this is no

Краткое содержание страницы № 16

Type of mouse / system Driver type Likely expected Suggested Connected at bootup data format restoration PS/2 PS/2 only PS/2 F5 PS/2 IntelliMouse PS/2 F5 IntelliMouse / SmartView PS/2 only PS/2 F5 IntelliMouse / SmartView IntelliMouse IntelliMouse F6 To restore lost mouse movement on a CPU connected to the SmartView: 1) Select the CPU that has lost its mouse movement 2) Press the select key on the front of the SmartView for 5 seconds until ‘C’ is displayed. You are now in configure mode. 3) To r

Краткое содержание страницы № 17

3. Using the SmartView This section explains the general operation of the SmartView. We recommend that you read this section before starting to use the product. 3.1 Power on status At power on the SmartView selects PC number 1 and displays '1'. If a password has been set then ‘P’ will be displayed and the SmartView will remain locked until a valid password is entered. 3.2 Front panel key and remote controller The front panel key is used to select which channel is currently connected to the share

Краткое содержание страницы № 18

3.4 Keyboard hotkey control SmartView can be conveniently controlled by selecting channel, autoscan mode or security locking from the keyboard. All of the hotkey control commands are invoked by holding down the two hotkeys and then pressing a command key. By default, the two hotkeys are ‘CTRL’ and ‘ALT’, although other combinations can be selected by reconfiguring the hotkeys (see section 4.5). Once the hotkey command has been activated you will need to release the hotkeys and the command key be

Краткое содержание страницы № 19

channels (see section 4.9) then only the active channels will be selected. Otherwise the SmartView will cycle through all channels when using HOTKEYs + TAB. The hotkey command are summarised below (note that the numbers on the numeric keypad do not form part of a valid hotkey) : ‘HOTKEYs’ and ‘1’ - selects channel 1 ‘HOTKEYs’ and ‘2’ - selects channel 2 ‘HOTKEYs’ and ‘3’ - selects channel 3 ‘HOTKEYs’ and ‘4’ - selects channel 4 ‘HOTKEYs’ and ‘TAB’ - selects the next active channel if the SmartVi

Краткое содержание страницы № 20

To 'tab through' channels: ba bav v v v v press release press v v v vba release press release 3.5 Mouse control The channels can conveniently be changed on ADDERview by using a three button mouse. In order to switch to the next channel simply hold down the central mouse button (the wheel mouse button on an IntelliMouse) and click on the left hand mouse button. The channel will then change. If the SmartView has been set to scan active ports then the next active channel will be selected. If it h


Скачавание инструкции
# Руководство по эксплуатации Категория Скачать
1 Adder Technology AdderView CATx CATX-PS2A Руководство по эксплуатации Сетевая карта 2
2 Adder Technology AdderLink AV Series Руководство по эксплуатации Сетевая карта 2
3 Adder Technology AdderView CATx CATX-USBA Руководство по эксплуатации Сетевая карта 2
4 Adder Technology AdderView CATx AVX4016 Руководство по эксплуатации Сетевая карта 2
5 Adder Technology AdderView CATx CATX-USB Руководство по эксплуатации Сетевая карта 1
6 Adder Technology Adder SmartView SV4 Руководство по эксплуатации Сетевая карта 1
7 Adder Technology AdderView CATx 1000 Руководство по эксплуатации Сетевая карта 8
8 Adder Technology AdderView CATx EPS-S8 Руководство по эксплуатации Сетевая карта 0
9 Adder Technology AdderView CATx CATX-PS2 Руководство по эксплуатации Сетевая карта 0
10 Adder Technology GEMAV4GEM Руководство по эксплуатации Сетевая карта 2
11 Adder Technology AdderView CATx X200AS/R Руководство по эксплуатации Сетевая карта 8
12 Adder Technology AdderView CATx X100AS/R Руководство по эксплуатации Сетевая карта 1
13 Adder Technology SMARTVIEW PRO SV16PRO Руководство по эксплуатации Сетевая карта 0
14 Adder Technology SMARTVIEW PRO SV12PRO Руководство по эксплуатации Сетевая карта 0
15 Adder Technology AdderView CATx X100A/R Руководство по эксплуатации Сетевая карта 2
16 Sony BTA-NW1A Руководство по эксплуатации Сетевая карта 2
17 Sony BKMW-E3000 Руководство по эксплуатации Сетевая карта 2
18 Sony AC-SQ950D Руководство по эксплуатации Сетевая карта 0
19 Sony BBV RX100 Руководство по эксплуатации Сетевая карта 3
20 Sony CLIE A-AVZ-100-11 Руководство по эксплуатации Сетевая карта 1