Краткое содержание страницы № 1
Analog Resistive Touch Screen Controller
TSC-30/IC product specification
Краткое содержание страницы № 2
TSC-30/IC Product Specification Table of Contents 1. Products outline ...................................................................................................................... 2 1-1. Scope of Application ........................................................................................................................2 1-2. Outline..............................................................................................................................................
Краткое содержание страницы № 3
TSC-30/IC Product Specification 1. Products outline 1-1. Scope of Application This specification applies to the TSC-30/IC. 1-2. Outline TSC-30/IC is an analog touch screen control IC that performs A/D conversion on analog signal for the 4-wire, 5-wire and 8-wire resistive analog touch screen, and transmits coordination data with 10bit resolution to the host in a 9600bps serial (asynchronous) and USB. At the coordinate detection, internal filtering process provides a stabilized coordin
Краткое содержание страницы № 4
TSC-30/IC Product Specification 1-4. General specification Item Rating Notes Power supply voltage DC 3.00V to 5.25V 125mW (standard) Power supply voltage is 5V. Power consumption 30mW (standard) Power supply voltage is 3.3V. -20 ˚C to +85 ˚C Asynchronous serial (No dew condensation) Operating Temp 0 ˚C to +70 ˚C USB (No dew condensation) -40 ˚C to +125 ˚C Temperature range at storing (No dew condensation) Communication scheme Asynchronous, serial Communication rate 9600bps
Краткое содержание страницы № 5
TSC-30/IC Product Specification 2. Pin layout and representation EEP-CLK/JP10 49 32 PANEL_UR EEP-CS/JP9 50 31 PANEL_LL RxD 51 30 PANEL_XR/LR TxD 52 29 PANEL_XL/UR 53 28 PANEL_YU/UL 54 27 PANEL_YD/LL TSC-30x JP1 55 26 D- JP2 56 25 D+ JP3 57 24 TrON XXX ###### JP4 58 23 USBVref JP5 59 22 Vcc JP6 60 21 Vcc JP7 61 20 Vss JP8 62 19 INDEX PANEL_AD_YD 63 18 LED2 PANEL_AD_YU 64 17 LED1 Marking specification TSC-30x Product
Краткое содержание страницы № 6
TSC-30/IC Product Specification 3. Pin functions Pin Pin name I/O Functional description number 1 PANEL_AD_XL I Touch Screen XL input pin. 2 PANEL_AD_XR I Touch Screen XR input pin. 3 SW0 I SW0 input pin; H=ON=1, L=OFF=0. 4 SW1 I SW1 input pin; H=ON=1, L=OFF=0. 5 I Unused pin. Via resistance; Vcc is connected. 6 I Unused pin. Via resistance; Vcc is connected. 7 CNVss P Vss is connected. 8 RESET I Reset input pin (active L). 9 Vcc P Power supply input pin; Vcc is connected. 10 Vr
Краткое содержание страницы № 7
TSC-30/IC Product Specification 40 PANEL_THOb2 I/O Touch screen control pin. Used only in 5-wire mode. In 4-wire/8-wire mode, opened. 41 PANEL_THOb1 I/O Touch screen control pin. Used only in 5-wire mode. In 4-wire /8-wire mode, opened. 42 PANEL_THOa I/O Pen down detection pin. 43 PANEL_THI I In power-save mode, start signal input pin by pen down. 44 O Unused pin; Opened. 45 O Unused pin; Opened. 46 O Unused pin; Opened. Vcc is connected. 47 EEP-DO/JP12 I/O When using EEPROM, EEPROM
Краткое содержание страницы № 8
TSC-30/IC Product Specification 4. Initial setting 4-1. EEPROM setting Depending on that calibration is performed in either TSC-30/IC or host, you can select whether EEPROM is used or not to store the correction data. EEPROM selection can be set via pin number 50, where hardware reset release enables the setting. VCC (TSC-30/IC) (EEPROM) H= Not used EEP-CS/JP9 L= Used CS 4-2. Communication mode setting Communication mode setting for serial/USB is performed by setti
Краткое содержание страницы № 9
TSC-30/IC Product Specification 4-4. Configuration in USB mode § Basic configuration Item Specification USB standard Specification Rev2.0 Full Speed Power supply Bus power supply / Self-Power Device class Vendor definition Interrupt (coordinate) 1ms transfer interval End point buffer size EP0: 8byte EP1: 5byte (EP0: control transfer, EP1: interrupt transfer) § Connection with Host Coordinate data, correction value or other various output data are all output to the host as a respo
Краткое содержание страницы № 10
TSC-30/IC Product Specification 5. Data sheet 5-1. Absolute maximum rating Rating Item Symbol Unit Description Minimum Maximum Power supply voltage VCC -0.3 6.5 V Input voltage VI -0.3 Vcc+0.3 V Output voltage VO -0.3 Vcc+0.3 V Power consumption PD 500 mW Ta=25˚C Operation temperature TOPR -20 +85 ˚C Storage temperature TSTG -40 +125 ˚C Document No. DER-S0008A 9 Version 1.0 ©2008 DMC Co., Ltd.
Краткое содержание страницы № 11
TSC-30/IC Product Specification 5-2. Recommended operational conditions Rating Item Symbol Unit Description Minimum Standard Maximum Vcc 3.00 5.00 5.25 V Power supply voltage AVcc Vcc V Analog reference voltage AVREF 2.0 Vcc V Analog reference voltage 3.0 3.6 V Vcc=3.6 to 4.0V USBVREF Analog reference voltage USB 3.0 Vcc V Vcc=3.0 to 3.6V Vss 0 V Power supply voltage AVss 0 V Analog reference voltage “H” input voltage VIH 0.8Vcc Vcc V (Pin number 16-19, 27-50)
Краткое содержание страницы № 12
TSC-30/IC Product Specification “L” output peak current *2 IOH (peak) 10 mA (Pin number 27-50) “L” output peak current *2 IOH (peak) 20 mA (Pin number 16-19) “L” output peak current *2 IOH (peak) 10 mA (Pin number 1-6, 51-64) “H” output average current *3 IOH (avg) -5 mA (Pin number 16-19, 27-50) “H” output average current *3 IOH (avg) -5 mA (Pin number 1-6, 51-64) “L” output average current *3 IOL (avg) 5 mA (Pin number 27-50) “L” output average current *3 IO
Краткое содержание страницы № 13
TSC-30/IC Product Specification 5-3. Timing requirement § Reset (Vcc = 3.0 to 5.25V , Vss = 0V , Ta = -20 to 85°C) Rating Item Symbol Unit Description Minimum Maximum RESET L width tw 2 μs tw RESET 0.8Vcc 0.8Vcc 0.2Vcc 0.2Vcc § Power-on reset Reset input voltage shall be 0.6V or below at the timing when power supply voltage crosses 3.0V. (Ta = -20 to 85°C) (PWR ON) 3.0V Reset release voltage: Vcc = 3.0V VCC ≦0.2Vcc RESET Do
Краткое содержание страницы № 14
TSC-30/IC Product Specification § External clock timing Rating Item Symbol Unit Description Minimum Maximum Input cycle tC 166 ns Clock pulse width tWH, tWL 70 ns tC tWH tWL 0.8VCC 0.2VCC XIN § Clock input circuit Using ceramic vibrator External clock input circuit CIN XIN XIN XOUT Open XOUT COUT Document No. DER-S0008A 13 Version 1.0 ©2008 DMC Co., Ltd.
Краткое содержание страницы № 15
TSC-30/IC Product Specification 5-4. DC standards (Vcc=3.00 to 5.25V, Vss=0V, Ta=-20 to 85˚C, unless otherwise noted) Rating Item Symbol Condition Unit Minimum Standard Maximum IOH = -10mA Vcc-2.0 “H” Output voltage VCC = 4.0 to 5.25V VOH V (Pin number 16-19, 27-50) IOH = -1.0mA VCC-1.0 IOH = -10mA Vcc-2.0 “H” Output voltage VCC = 4.0 to 5.25V VOH (Pin number 1-6, 51-64) IOH = -1mA Vcc-1.0 Pull-down with 0V via a “H” Output voltage VOH 2.8 3.6 V (Pin number. 25
Краткое содержание страницы № 16
TSC-30/IC Product Specification Vcc= Normal 2.1 60 mA 4.0 to 5.25V Icc1 mode Vcc= mA *1 35 3.0 to 4.0V STOP mode Vcc= Power supply current Icc2 2.0 mA *2 3.0 to 5.25V Vcc= At USB 125.0 250 uA 4.0 to 5.25V Icc3 suspend Vcc= mode*3 0.1 uA 3.0 to 5.25V *1: All USB difference-input circuits enabled. Leaving I/O pins open. Operating functions: CPU, Timers *2: All USB difference-input circuits enabled. Leaving I/O pins open. Operating functions: Timers, USB receiving. Disable
Краткое содержание страницы № 17
TSC-30/IC Product Specification 6. Packaging Specification 6-1. Outline With a basic packaging unit of 800, TSC-30/IC is packaged for the number of 800 and its multiple using damp-proof aluminum laminate bags (Basic packaging). If the delivery quantity is less than 800 or not multiple of 800, or the product can not be packaged with a unit of 800, then no damp-proof packaging specification is applicable (Small group packaging). If packaged with small group packaging, the products may be d
Краткое содержание страницы № 18
TSC-30/IC Product Specification 6-3-3. Diagram for packaging box sizes L: 351 W: 148 D: 55 (mm) 6-4. Small group packaging 6-4-1. Packaging type General packaging (No damp-proof processing) 6-4-2. Packaging quantity specification Quantity per tray Number of trays Quantity per packages 160 1 – 5 + 1(cover) 1 - 799 Number of trays: 1 to 5 (Additionally, one dummy tray pl Air cap Desiccant aced at the top for reinforcing)
Краткое содержание страницы № 19
TSC-30/IC Product Specification 6-5. Tray specification This tray is heat-proof type, allowing the heating with 125 °C for 24 hours. During heating/cooling process, however, bending may occur. In baking process, to minimize the bending, heat and cool the tray by placing it on a flat plate. 6-6. Product name label specification DMC P/N: Product number (TSC-30/IC) QTY: Quantity DAC: DMC Control Number Document No. DER-S0008A
Краткое содержание страницы № 20
TSC-30/IC Product Specification 7. Storage Specification 7-1. Storage Conditions For storing the product until its implementation, it is recommended that the following storage conditions are applied: 1. Before unpacking the damp-proof package (Aluminum laminate bag) Temperature and humidity: 5 to 40 °C, 20 - 80%RH Duration: Two years or less 2. After unpacking the damp-proof package (Aluminum laminate bag) For the storing duration after the damp-proof package is unpacked and before t
