Руководство по эксплуатации Addonics Technologies NAS30U2

Краткое содержание страницы № 1

T E C H N O L O G I E S
Quick Installation Guide
NAS 3.0 Adapter
(NAS30U2)
www.addonics.com
v5.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/

Краткое содержание страницы № 2

For more detailed information on setting up the NAS30U2 adapter, refer to the User Manual located on the CD that came with the device. The NAS 3.0 adapter is a flexible, economical and powerful unit for your Network. Follow the instructions to help you connect, setup and configure it. Note: Any external USB storage device that you connect to the NAS 3.0 adapter is required to be pre-formatted with either NTFS, FAT32 or FAT64. When the external USB storage device is connected to the NAS 3.0

Краткое содержание страницы № 3

I. NAS30U2 Hardware Installation Access LED System LED USB Mass Storage Device Power LED (Full read/write function) 5V Power Jack Reset Button RJ45 Socket Additional USB Mass Storage (read-only) or USB Printer 1. Connect external USB Storage device into USB port of the NAS Adapter. Power on the USB Storage device. 2. Connect LAN cable via LAN switch and Router. 3. Connect 5V power adapter to power up the NAS adapter NAS30U2 connected directly to a computer’s NIC card If you connect th

Краткое содержание страницы № 4

2. When NAS30U2 has been found, click “Connect” to enter web GUI utility. Open NAS30U2 web GUI by using web browser. 1. Open web browser and type default host name “storage” in the search bar. 2. Default login is “admin” for both User name and password. Click “OK” to enter configurations. Identification You can change and modify your host, group name and password from this page. Click “Apply” to save the setting. Host name: This is used to identify your device on the network.

Краткое содержание страницы № 5

LAN Configuration By default, “LAN Config” is set to “Automatic IP”. This will allow the NAS30U2 to obtain its IP address automatically. If you prefer setting it manually, select the static IP option, enter your own value and click “Apply” to confirm the new setting. To access File Server’s PUBLIC folder of NAS30U2 in Windows Click on the Windows icon located on the bottom left corner of the screen, on the “Search programs and files” \\ followed by the IP address of the NAS3.0 adapter. Eg:\

Краткое содержание страницы № 6

Type “Guest” as username. Leave password empty. Click on OK. This will direct you to the Public folder on the NAS drive. Now you have set up the folder that you wish to share on your NAS . This folder can be access from other computer on your local network. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Краткое содержание страницы № 7

To list the NAS drive in Network Places Go to Network Places in Windows XP, under Network Tasks, click on the “Set up a home or small office network”. Follow the wizard and once completed, reboot your system. For Vista and Windows 7, enable file sharing when accessing the NAS over the network. To access Samba PUBLIC folder of NAS30U2 in Ubuntu 8.04 First, using the console get the prerequisites for the samba file system: $ sudo aptitude install samba smbfs $ mkdir /mnt/NAS $ sudo mount.cifs

Краткое содержание страницы № 8

To access Samba PUBLIC folder of NAS30U2 in Mac OS X 1. Start at the "Go" drop down menu at the top of your screen, then click "Connect to server". 2. Type into the "Server Address" field 'smb://' followed by the IP address of the NAS30U2 you want to connect. 3. Click the "Connect" button in the bottom right corner of the window. 4. Enter in a username and password. Click the "OK" button in the bottom right hand corner of the window to finish. Note: The workgroup name ne