Руководство по эксплуатации Sony SRP-X700P

Краткое содержание страницы № 1

BID SPECIFICATION
FOR
POWERED MIXER / SWITCHER





MODEL NUMBER
SRP-X700P



INSTRUCTIONS:
REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND
PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN
CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING
THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF
PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE
INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT
SP

Краткое содержание страницы № 2

1.0 General Information The purpose of this information is to provide the specification for a product whose primary purpose is the signal distribution of audio, video and / or computer graphics information to audio speakers, video or graphics displays or other processing devices. This distribution of these signals is to be accomplished via a rack mountable signal processing device. This document provides the minimum specifications for this device. 2.0 Description This product sh

Краткое содержание страницы № 3

1080I (50 and 60 Hz) VGA Computer Graphics (Modes 1, 2 and 3, 60 - 85 Hz) VESA 800x600 Computer Graphics (56 - 85 Hz) VESA 1024 x 768 Computer Graphics (43 – 85 Hz) VESA 1152 x 864 Computer Graphics (70 – 75 Hz) SUN 1152 x 900 Computer Graphics (65 – 76 Hz) VESA 1280 x 1024 Computer Graphics (43 – 60 Hz) Mac 13” Computer Graphics Mac 16” Computer Graphics 4.0 User Interface / Controllability Information Control of this device shall be accomplished through one of the following meth

Краткое содержание страницы № 4

The advanced serial control jack shall employ the use of a standardized device control protocol that is commonly accepted and understood by control systems manufacturers. This control jack shall accept and transmit bi-directional serial commands that provide full control over the device, and provide acknowledgement to the control system of the received command. The parallel (contact closure) control jack shall employ the use of a standardized device control protocol that is commonly ac

Краткое содержание страницы № 5

Fast Forward Record Previous Track Next Track The serial control output jack shall employ the use of a standardized device control protocol that is commonly accepted and understood by control systems manufacturers. This control jack shall transmit uni-directional serial commands that provide full control over the projector or display. The controllable projectors or displays shall include those with a compatible control input from the supplying manufacturer. The following device fun

Краткое содержание страницы № 6

5.0 Performance Specifications This device shall fully support all video color systems using pass-though capability. The maximum video bandwidth shall be at least 10MHz. The maximum RGB bandwidth shall be at least 150MHz. The device shall be capable of passing a resolution of at least 1280x1024 pixels at 60Hz refresh. This device shall support audio signals within the frequency range of 20Hz to 20,000Hz. This device shall include a built-in stereo audio amplifier that is capable

Краткое содержание страницы № 7

(3) Composite video on BNC connectors or Y/C video on 4 Pin DIN connectors Unbalanced stereo line inputs on an RCA (Phono) connectors (1) Component / Analog RGB on an HD-15 (VGA) connector Unbalanced stereo line input on an RCA (Phono) connectors (2) Component / Analog RGB on HD-15 (VGA) connectors Unbalanced analog 5.1 surround line inputs on RCA (Phono) connectors This device shall provide for connection of multiple audio and video output devices without employing the use of an externa