Краткое содержание страницы № 1
2-346-297-21 (1)
AUDIO MIXER
Table of Contents
SRP-V110
Main characteristics ............................... 2
Dimensions.............................................. 2
Operating instructions
Before operating the unit, please read this manual and the supplied
“WARNING” thoroughly and retain it for future reference.
Precautions
On safety (Refer to the supplied “WARNING”.)
• Should any liquid or solid object fall into the cabinet, unplug the unit and
Connections example...........................
Краткое содержание страницы № 2
Main characteristics This is a small, multi-functional eight-group buses audio Equipped with 8 AUX channels mixer combined with a small/mid-sized SR system and AUX 1/2 can be used as STEREO AUX of the pre-fader. multi track recorder, etc. that supports recording systems. AUX 3/4 can (simultaneously) switch between the pre and post faders. AUX5/6 can be switched to AUX7/8 using the Equipped with 10 channels of mono input, 4 fader. channels of stereo input, and 4 channels of auxiliary stereo input
Краткое содержание страницы № 3
Main characteristics Dimensions Connections example Connections example SR system connection Keyboard Compressor AUDIO MIXER SRP-V110 Microphone CD or MD Player Compressor Graphic Equalizer Graphic Equalizer Effector Power Amplifier Power Amplifier Main Speaker Monitor Speaker Recording system connection Keyboard Compressor Multi Track Recorder Microphone CD or MD Player AUDIO MIXER SRP-V110 Monitor Speaker Effector DAT(Master Recorder) 3
Краткое содержание страницы № 4
Name and function of each part MONO INPUT section 1 POWER switch When the switch is pressed to the ON side, the power is turned on. 2 LEVEL control This controls the input signals from the MIC or LINE connectors at a suitable level. When connected to the MIC connector, the input signal level can be controlled between –10 - –60 dBu, and when connected to the LINE connector, it can be controlled between +10 - –40 dBu. In order to control the input signal at a ON suitable level, set the meter to VU
Краткое содержание страницы № 5
Name and function of each part 9 AUX 1-2 PAN control !¤ PAN control When turned towards the “1”, sound is shifted to the When turned in the “L ODD” direction, sound is AUX 1 bus, and when turned in the “2” direction, it is shifted to the MASTER L, GROUP 1, 3, 5 and 7 (odd shifted to the AUX 2 bus. When turned to the channel) buses, and when turned in the “R EVEN” maximum in either direction, the output level is direction, sound is shifted to the MASTER R, GROUP increased by +3 dB. 2, 4, 6, and 8
Краткое содержание страницы № 6
Name and function of each part STEREO INPUT section ST5 ST6 ST7 ST8 !° 0 0 0 0 - ∞ - ∞ - ∞ - ∞ ST1 ST2 ST3 ST4 -10dBs -10dBs -10dBs -10dBs 1 HIGH HIGH HIGH HIGH 2 -15 +15 -15 +15 -15 +15 -15 +15 MID MID MID MID 3 -15 +15 -15 +15 -15 +15 -15 +15 LOW LOW LOW LOW 4 +15 -15 +15 -15 -15 +15 -15 +15 AUX AUX AUX AUX 1-2 1-2 1-2 1-2 5 0 0 0 0 - ∞ - ∞ - ∞ - ∞ 3 3 3 3 0 0 0 0 - ∞ - ∞ - ∞ - - ∞ 4 4 4 4 6 0 0 0 0 - ∞ - ∞ - ∞ - ∞ 7 7 5 7 5 7 5 5 - ∞ 0 - ∞ 0 - ∞ 0 - ∞ 0
Краткое содержание страницы № 7
Name and function of each part 9 ON button ST1 - ST4 channels When turned on, the signals from the channels are routed to each output. However, the PFL function is available even if this switch is turned off. 1 –10 dBs button When this button is turned off, the reference input !¼ Balance control level is +4 dBu; and when it is turned on, it is –10 dBu. When turned in the “L ODD” direction, sound is shifted to the MASTER L, GROUP 1, 3, 5, and 7 (odd 2 HIGH (High equalizer) level control channel)
Краткое содержание страницы № 8
Name and function of each part MONITOR section 1 PHONES (headphones) connector Phone jack (Tip: L, Ring: R, Sleeve: GND) This is the connector that the headphones are connected to. The same signals are output as those from the MONITOR OUTPUT connectors, and signals from channels whose PFL or AFL buttons are turned on can be confirmed. 2 PEAK meter indicator AUDIO MIXER SRP-V110 This is lit up when the level meter is used as a peak meter. PHONES 1 3 VU meter indicator This is lit up when the leve
Краткое содержание страницы № 9
Name and function of each part MASTER section 1 AUX MASTER controls This controls the output level to the AUX OUTPUT connector. 2 PRE buttons This switches AUX 3 and AUX 4 for all channels between the pre-fader and post fader. It is switched to pre-fader when it is on, and post fader when it is off. 3 AFL buttons AUDIO MIXER SRP-V110 The signals after the AUX MASTER volume are routed to the PHONES or MONITOR OUT connectors, and PHONES displays the level on the meter. When the AFL buttons for a
Краткое содержание страницы № 10
Name and function of each part Back panel section 74 5 GRP/ TAPE STEREO INPUT DIRECT MONO INPUT IN OUT ST6 ST5 ST2 ST1 8 MIC L(MONO) R L(MONO) L R R INSERT LINE L(MONO) 7 ON OFF R 8 !£ +48V 10 MONITOR ST8 ST7 ST4 ST3 MIC OUT L(MONO) RL R L R L(MONO) R L(MONO) INSERT LINE !¼ R INSERT OUTPUT RL L 8 7 6 5 4 R L 3 OUT IN R MASTER 2TR AUX OUTPUT !ª !Á 96 8 1 MONO INPUT MIC connectors 5 STEREO INPUT connectors XLR-3-31 type Phone jacks (ST1 – ST4) (Balanced, reference level: –60 - –10 dBu) (Tip: hot,
Краткое содержание страницы № 11
Name and function of each part 2 3 GRP/ TAPE MONO INPUT DIRECT IN MONO INPUT OUT 7 2 1 MIC MIC MIC INSERT LINE 1 INSERT LINE INSERT LINE 2 9 4 3 MIC MIC MIC INSERT LINE INSERT LINE INSERT LINE 3 4 6 5 MIC MIC 2 1 5 INSERT LINE INSERT LINE 6 1 74 8 AUX OUTPUT connectors !£ +48 V button Phone jacks (Unbalanced, reference level: +4 dBu) This is the button to supply power (DC +48 V) for condenser microphones to the MIC connectors of the MONO INPUT channels 1 - 8. When this button is 9 2TR OUT connec
Краткое содержание страницы № 12
Block diagram +48V FADER PEAK L-R STEREO L ON TAPE LCF FADER PAN OUTPUT MIC +4dBs -10 - -60dBs 1-2 EQ INSERT LCF 3-4 LINE -20dB FREQ +10 - -40dBs LEVEL 5-6 LEVEL 7-8 STEREO R LOW MID HIGH INSERT OUTPUT +4dBs MONI PAN INSERT TAPE INPUT AUX1-2 -10dBs AUX3 AFL ATT 2TR GROUP/DIRECT OUTPUT AUX4 OUTPUT ATT DIRECT ATT -10dBs AFL MONO -10dBs 7/8 LEVEL AUX5/7 METER 7/8 PEAK AUX6/8 L/ODD PFL PHONES MONO INPUT 1-8 R/EVEN +48V MONITOR PEAK OUTPUT L-R +4dBs LCF ON FADER PAN MIC MONITOR -10 - -60dBs 1-2 EQ
Краткое содержание страницы № 13
Block diagram Main specifications Main specifications Name Connector type Circuit Reference level Maximum level Impedance Suitable load impedance MONO INPUT MIC XLR-3-31 type Balanced –60 - –10 dBu –37 - +13 dBu 2.2 kW — LINE ø 6.3 Phone –40 - +10 dBu –17 - +27 dBu 22 kW — jack TAPE INPUT Phono jack Unbalanced –10 dBu +13 dBu 10 kW — INSERT ø 6.3 Phone Unbalanced –3 dBu +20 dBu 30 kW — INPUT jack INSERT –3 dBu +20 dBu 47 W 600 W or more OUTPUT STEREO INPUT 1-4 ø 6.3 Phone Balanced –10/+4 dBu +13
Краткое содержание страницы № 14
Trouble-shooting guide In the event of any unexpected problems, please double-check the following points. If after that, normal operation cannot be resumed, contact the store from which the item was purchased, or your nearest Sony dealer. Condition Causes/Solutions When the POWER switch is turned on, the power • Check that the power cord is connected. indicator does not light up, nor is any sound output. Although the POWER indicator is lit, no sound is • Check whether or not the ON button is tur
Краткое содержание страницы № 15
15
Краткое содержание страницы № 16
Printed in Japan
