Руководство по эксплуатации Stanton M.212

Краткое содержание страницы № 1

M.212
USER’S MANUAL

Краткое содержание страницы № 2

IMPORTANT SAFETY PRECAUTIONS 1. Read Instructions – All the safety and operating instructions should be read 14. Servicing – The user should not attempt any service to the appliance beyond before this product is operated. that described in the operating instructions. All other servicing should be 2. Retain Instructions – The safety and operating instructions should be retained referred to qualified service personnel. for future reference. 15. Ventilation – Slots and openings in the cabinet are

Краткое содержание страницы № 3

INTRODUCTION Thank you for purchasing Stanton’s newest innovation in professional tabletop mixer. The M.212 mixer was designed to bring style and reliability to the mobile or club DJ at an affordable cost. MAIN FEATURES 2 bend EQ w/ input GAIN control per channel. Fader Start Power on/off muting Long Life crossfader Crossfader curve control ACCESSORIES Checking Package Contents Check that the carton contains the followin

Краткое содержание страницы № 4

CONTROL OVERVIEW TOP PANEL 1. Channel Gain - Adjusts the pre-fader volume for cleaner 9. Headphone Input - Insert your ¼” headphone plugs here. sound. Reduce the channel gain if you notice the level indicators flashing red. 10. Fader Start On/Off Switch - When the unit has been connected to a CD player using a control cable, this 2. Mic Input Gain - Adjusts microphone input level.

Краткое содержание страницы № 5

1 CONTROL OVERVIEW REAR PANEL DC 6V 16. Power Switch - Turns unit off and on. 17. Power Connector - Plug in the included power supply here. 18. Fader Start Control Jacks - Connect these jacks to the Fader input jacks of the CD player using the 3.5mm stereo mini cord. 19. Master Output - Unbalanced RCA connectors controlled by the Master level. 20. Line Inputs - Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, HiFi VCRs, cassette decks, DAT machines, la

Краткое содержание страницы № 6

QUICK SETUP DIAGRAM Review this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources, such as turntables or CD players first, th

Краткое содержание страницы № 7

SPECIFICATIONS Input / output impedance & sensitivity: (Master 0 dBV output, load= 100k ohm, Max, Gain, EQ flat) Line 10k ohm /-14 dBV (200 mV) +/-2 dB Phono 47k ohm /-50 dBV (3.16mV) +/-2 dB Mic 2.2k ohm /-60 dBV (1mV) +/-2 dB Master 1k ohm Phones 33 ohm / 0 dBV (1V) ±2 dB Max. output (THD= 1%, Maximum gain, EQ flat) Master More than +18 dBV (8.0V) at load= 100k ohm Phones More than +4 dBV (1.6V) at load= 32 ohm Channel balance: Within 3 dB Frequency respons

Краткое содержание страницы № 8

WARRANTY & RETURN POLICY Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one year following the date of original purchase. Exceptions to this warranty are as noted below: The warran