Краткое содержание страницы № 1
Revolabs HD Venue ™
Wireless Microphone System
Models: 01-HDVENU, 03-HDVENUEU, 03-HDVENUCN, 03-HDVENUJP
User and Set-up Guide
Краткое содержание страницы № 2
© 2010 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from Revolabs, Inc. Product specifications are subject to change without notice. Re v o l a b s H D V e n u e ™ W i re l e ss M i c ro p h o n e S y st e m Ma n u a l 01 -HD V N U M A N -PAP-11 M A R C H 2 0 1 2 ( Re v 2 . 2 )
Краткое содержание страницы № 3
Contents Safety and General Information .................................................................................................................... 4 Introduction.................................................................................................................................................... 6 System Components ................................................................................................................................ 6 Installing the Revolabs
Краткое содержание страницы № 4
Safety and General Information Please read the following information to ensure safe and efficient use of your Revolabs system. FCC User Information FCC ID: T5V01HDVENUNM Revolabs HD Venue™ Station FCC ID: T5V01HDEXEMIC Revolabs HD ™ Microphone FCC Notice to Users Users are not permitted to make changes or modify the equipment in any way. Changes or modifications not expressly approved by Revolabs, Inc. could void the user‘s authority to operate the equipment. This device complies with
Краткое содержание страницы № 5
Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. The use of wireless devices and their accessories may be prohibited or restricted in cert
Краткое содержание страницы № 6
Introduction Congratulations on your purchase of a Revolabs Wireless Microphone System! This system utilizes 1.9 GHz DECT technology, and high band-width audio from multiple wireless microphones, enabling clear, reliable, un-tethered communications in recording, audio/video conferencing, speech recognition, VOIP communications, sound re-enforcement as well as many other environments requiring clear audio capture. The Revolabs HD Venue™ Wireless Microphone System has high definition aud
Краткое содержание страницы № 7
Acoustic echo cancellation (AEC) Feedback elimination Level control Equalization Noise cancellation The system is designed to optimize audio capture/reproduction by providing: Consistent audio input from all participants Minimum room noise Mute control Wireless encryption Automatic channel selection Full duplex audio The Charger Base charges the HD Wireless Microphones and stores them when not in use. Installing the Revolabs HD Venue™ Base Station
Краткое содержание страницы № 8
Revolabs HD Venue™ Base Station Connections The Revolabs HD Venue™ Base Station, shown below in front and rear panel views, manages wireless audio signal processing, pairing, and muting between the Revolabs microphones and the Base Station. Front View 3 1 2 Rear View 4 5 7 6 8 9 Controls and Connections: 1. Channel LED indicators: Displays microphone mute and pairing states 2. Pairing Push Buttons: For pairing microphones to Base Station 3. Antennae 4. Female
Краткое содержание страницы № 9
Revolabs HD Venue™ Base Station Audio Connections There are two 3.5mm balanced inputs (either ¼‖ or XLR) and two 3.5mm balanced outputs (either ¼‖ or XLR) on the back panel of the unit providing access to each channel‘s audio signal. ¼‖ jacks are configured as follows: Tip positive Ring negative Sleeve ground XLR connectors are configured as follows: Pin 1 ground Pin 2 positive Pin 3 negative There are two output channels representing a separate channel for each microphone. The
Краткое содержание страницы № 10
Using the Rear Panel Configuration DIP Switches off on 1 2 3 4 5 6 7 8 DIP Feature Off (Default) On Switch Individual 1 Output Mixing Mixed Output Outputs 2 Low Pass Filter No LPF LPF Audio Output 3 Line Level Mic Level Level Individual 4 Mute Mode No Mutes Mutes Half of the All frequencies 5 Sharing Mode frequencies will will be used. be used. 6 A/B Freq Groups A Frequencies B Frequencies 300' 150' 75' 25' 7 Off On Off On Transmit Power 8 O
Краткое содержание страницы № 11
DIP Switch 5&6 – Sharing Mode: To use two HD Venue Systems in the same area, both systems must have DIP Switch 5 set to ON. One of the HD Venue Systems must have DIP Switch 6 set to ON (A frequencies) and the other HD Venue System must have DIP Switch 6 set to OFF (B frequencies). DIP Switch 7&8 - Transmit Power: The transmit power of the Base Station can be adjusted to help reduce the operational radius of a Revolabs HD Venue System in order to prevent interference from other Revolab
Краткое содержание страницы № 12
Mics Unmute at Startup: By default the mics go into a muted state when they are removed from the charger. This is done to prevent handling noise as the microphone is placed into position. By selecting ‗Mics Unmuted at Startup‘, the mics will go into an unmuted state when removed from the charger. All Mic Mute: This feature removes the mics individual mute capability and causes both microphones to mute when the mute button on either microphone is pressed. The same effect will take plac
Краткое содержание страницы № 13
Battery: This provides the current battery level for the microphone that is paired to each channel and active. The value changes in 12.5% increments and represents the bottom of the range the battery is in. Therefore a value of 87% means that the battery level is between 87%-100%. Pairing: This provides the ability to activate pairing mode for the respective base station channel. It also provides the pairing status of any base station channel already in pairing mode. Firmware: This
Краткое содержание страницы № 14
1. Earpiece jack — accepts the 2.5mm plug for the earpiece. 2. Charging port — docks to Revolabs HD Charger Bases. 3. Pocket clip — also used to attach microphone to a lapel, blouse or lanyard. 4. Mute Button — press to mute, un-mute and pair microphone. 5. Acoustic Cover — protects delicate microphone element (non-removable). 6. LED display — visual status for mute, un-mute, and pairing. Note: Microphones in new systems must be paired to the Base Station with each microphone assigned
Краткое содержание страницы № 15
Adjusting the Volume on the Wearable Microphone Earpiece To change the volume on the Wearable microphone earpiece, use the dial on the earpiece wire. Turning the dial towards the earpiece, as shown in the figure, will increase the volume, and turning the dial towards the microphone will decrease the volume. Use the attached clothing clip to secure the earpiece wire. Using the HD Omni-Directional Tabletop Wireless Boundary Microphones The HD Omni-directional Tabletop Wireless Boundary
Краткое содержание страницы № 16
3. With the microphone in position on the table, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED). 4. To turn microphone off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED and release button. If the microphones are placed too far from the Base Station (~300 feet or 90 meters) the connection will be dropped (LED flashes all colors) and the micro
Краткое содержание страницы № 17
1. Remove the microphone from the Charger Base to turn on and automatically mute the mic. (indicated by a flashing RED LED) 2. Directional Tabletop microphones should be located on the table with the acoustic cover pointed toward the users, trying to keep the microphone 2 to 6 feet (.6 to 2m) from the target person or two. The pick-up pattern for this directional microphone is ~+/- 45º to either side of directly in front of the microphone. It is always better to be as close to the pers
Краткое содержание страницы № 18
2. Charging Port — docks to all Revolabs HD Charger Bases. 3. Mute button — press to mute, un-mute and pair microphone. 4. LED display — visual status for mute, un-mute, and pairing. 5. XLR Female connector — balanced audio for dynamic microphones. To use the HD Universal Wireless Adapter: 1. Remove the Microphone Adapter from the Charger Base. The adapter turns on and mutes automatically when removed from Charger Base (flashing RED LED). The XLR Microphone Adapter is attached
Краткое содержание страницы № 19
5 4 1 2 3 1. Audio Out port — accepts the 2.5mm plug for the earpiece. 2. Charging Port — docks to all Revolabs HD Charger Bases. 3. Mute button — press to mute, un-mute and pair microphone. 4. LED display — visual status for mute, un-mute, and pairing. 5. TA4F connector — connects to Countryman microphone cable. To use the HD Wireless Adapter for Countryman Microphone: 4. Remove the Microphone Adapter from the Charger Base. The adapter turns
Краткое содержание страницы № 20
Note: Microphones in new systems must be paired to the Base Station with each microphone assigned to a unique channel on the Base Station. Remember, microphones are always muted (flashing RED LED) when they are removed from the Charger Base and the Mute button needs to be pressed to make it ―live‖ (flashing GREEN LED). A microphone that is not paired will be indicated by a cycling RED-GREEN LED pattern. A Base Station channel that is not paired to a microphone will not show any activity
